Tusi Lesona a le Pule
Faamaumau Manatu
Matamata i le vitio lenei e saili ai e uiga i le pueina o manatuaga e faʻaaoga ai le DMX input.
Watch this video to find out about recording memories manually.
Faiga masani
In standard mode, recording memories allows you to store the current output levels in one of the 12 memories in the dimmer.
The fade time can also be adjusted, if required, during this operation.
It is recommended that when recording memories, the topset level for all channels is set to 100%.
Select the Record Memory option from the Memories menu, and press the ENT key. The screen shows:
Faamaumau Manatu
xx
The cursor appears in the memory number field (xx). Unprogrammed memories are indicated by an ‘*’ next to the memory number.
Use the numeric keypad or cursor keys to select the required memory (1 – 12).
Press the ENT key to confirm the memory selection. The screen shows:
Memory: xx
Fade Time: xx
O le fanua Memory e mo na'o fa'amatalaga ma e le mafai ona fa'asa'oina. O lo'o fa'aalia le fa'ailoga i le fanua Fade Time.
Use the numeric keypad or cursor keys to adjust the fade time as required (1 – 60 seconds).
Press the ENT key to save the fade time to the memory.
The dimmer will then grab the current output levels and store them in the selected memory.
The screen will briefly show a confirmation, and then return to the Record Memory screen.
ChilliNet Mode
In ChilliNet mode, recording memories allows you to store the current output levels in one of the 12 memories in the dimmer. Only the levels of the dimmer channels assigned to the specified area are recorded into the memory.
The fade time can also be adjusted, if required during this operation.
It is recommended that when recording memories, the topset level for all channels is set to 100%.
Select the Record Memory option from the Memories menu, and press the ENT key. The screen shows:
Eria: 1
Memory: xx
The cursor is in the Area field. Enter the required area number using the numeric keypad or cursor keys, then press the ENT key. If the area is valid, the cursor moves to the Memory field.
Use the numeric keypad or cursor keys to select the required memory (1 – 12).
Unprogrammed memories have an ‘*’ next to the memory number.
Press the ENT key to confirm the memory selection. The screen shows:
Area xx Mem xx
Fade Time: xx
The Area and Mem fields are for information only. The cursor appears in the Fade Time field.
Use the numeric keypad or cursor keys to adjust the fade time as required (1 – 60 seconds).
Press the ENT key to save the fade time to the memory.
The dimmer will then grab the current output levels for the selected area and store them in the selected memory.
The screen will briefly show a confirmation, and then return to the Record Memory screen.
Pepa / Punaoa
 |
leai 88 Chilli Pro Faamaumauga Faamaumauga [pdf] Tusi Lesona a le Pule Chilli Pro Fa'amaumauga Fa'amaumauga, Chilli Pro, Fa'amaumauga Fa'amaumauga, Manatu |