TINYTRONICS ESP32-WROOM-32UE Modules ma PCB Antenna

Fa'amatalaga o oloa

O le ESP32-WROOM-32UE o se mamana, lautele WiFi-BT-BLE MCU module e mafai ona faʻaaogaina i le tele o ituaiga o talosaga. E lagolagoina fesoʻotaʻiga puʻupuʻu eletise maualalo faʻapea foʻi ma galuega faigata e pei o le faʻaogaina o leo, faʻafefe musika, ma le faʻavasegaina o le MP3.

O le module o lo'o fa'aalia uma GPIO i luga o le pine se'i vagana ai na fa'aoga mo feso'ota'iga moli. E galue i se voltagu laina ole 3.0 V i le 3.6 V ma o loʻo i ai le tele ole laina ole 2412 MHz i le 2462 MHz. E sau ma le 4 MB SPI flash mo le teuina o polokalame faʻaoga ma faʻamaumauga.

O le ESP32-WROOM-32UE module o loʻo avanoa i le faʻatulagaga nei:

Module	Chip fa'apipi'i Flash	PSRAM	Fua fa'atatau (mm)
ESP32-WROOM-32UE	ESP32-D0WDV3	4 MB	N/A

Fa'aaliga: O fa'atonuga fa'apitoa e avanoa mo ESP32-WROOM-32UE (IPEX) fa'atasi ma le 8 MB flash po'o le 16 MB flash. Mo nisi fa'amatalaga fa'atonuga, fa'amolemole va'ai ile Espressif Product Ordering Information.

O le ESP32-WROOM-32UE o loʻo faʻaogaina i luga o le freeRTOS operating system ma LwIP. O loʻo iai foʻi le faʻavaveina o meafaigaluega mo le TLS 1.2. E lagolagoina e le module le faʻaleleia (faʻailoga) i luga o le ea (OTA), faʻatagaina tagata faʻaoga e faʻaleleia a latou oloa e tusa lava pe maeʻa ona faʻamalolo ma tau maualalo ma taumafaiga.

E uiga i le Pepa Lenei
O lenei pepa o loʻo tuʻuina atu faʻamatalaga mo le ESP32-WROOM-32UE modules ma PCB antenna ma IPEX an-tenna.

Toe Iloilo Tala'aga
Mo tala fa'asolopito o lenei pepa, fa'amolemole tagai ile itulau mulimuli.

Fa'asilasilaga o Suiga o Fa'amaumauga
E tuʻuina atu e Espressif faʻamatalaga imeli e faʻafou ai tagata faʻatau i suiga i faʻamaumauga faʻapitoa. Fa'amolemole lesitala ile www.espressif.com/en/subscribe.

Tusipasi
La'u mai tusi pasi mo oloa Espressif mai www.espressif.com/en/certificates.

Fa'asilasilaga ma Puletaofia Fa'asilasilaga
Fa'amatalaga i lenei pepa, e aofia ai URL fa'asinomaga, e mafai ona suia e aunoa ma se fa'aaliga. O LENEI FAAMAOGA E TUUINA E PEI E LEAI SE FAAMANUIAGA, E AOFIA AI SO'O SE FA'AALIGA O LE FA'AFO'A'I, LE'I SULIAGA, LAVA MO SO'O se fa'amoemoega fa'apitoa, po'o so'o se fa'amaoniga e tula'i mai i so'o se fa'amoemoega, fa'apitoa.AMPLE.
O noataga uma, e aofia ai noataga mo le solia o soʻo se aia tatau, e faʻatatau i le faʻaogaina o faʻamatalaga i totonu o lenei pepa faʻamaonia e le mafai. E leai ni laisene fa'aalia pe fa'auigaina, e ala i le estoppel po'o se isi mea, i so'o se aia tatau tau le atamai o lo'o tu'uina atu iinei. O le fa'ailoga a le Sui Usufono o le Wi-Fi Alliance o se fa'ailoga fa'ailoga a le Wi-Fi Alliance. Ole logo Bluetooth ole fa'ailoga fa'amaufa'ailoga ole Bluetooth SIG.

O igoa tau fefa'ataua'iga uma, fa'ailoga tau fefa'ataua'iga ma fa'ailoga fa'amaufa'ailoga o lo'o ta'ua i totonu o lenei pepa o mea totino a latou e ona, ma o lo'o fa'ailoaina.
Puletaofia © 2019 Espressif Inc. Ua taofia aia tatau uma.

Ua umaview

ESP32-WROOM-32UE o se mamana, lautele WiFi-BT-BLE MCU module e faʻatatau i le tele o ituaiga o talosaga, e amata mai i fesoʻotaʻiga eletise maualalo e oʻo atu i galuega sili ona faigata, e pei o le faʻaogaina o leo, faʻafefe musika ma le MP3 decoding.

E iai uma GPIO i luga o le pine se'i vagana ai mea ua uma ona fa'aoga mo feso'ota'iga moli. O loʻo galue le Module
voltage mafai ona va'ava'ai mai le 3.0 V i le 3.6 V. Va'ava'a laina ole 2412 MHz i le 2462 MHz. 40 MHz fafo e fai ma puna o le uati mo faiga. E iai fo'i le 4 MB SPI flash mo le teuina o polokalame ma fa'amaumauga.
O le faʻatonuga o faʻamatalaga o le ESP32-WROOM-32UE o loʻo lisiina i lalo:

Laulau 1: ESP32-WROOM-32UE Fa'amatalaga Fa'atonu

Module	Chip fa'apipi'i	moli	PSRAM	Fua fa'atatau (mm)
ESP32-WROOM-32UE	ESP32-D0WD- V3	4 MB 1	/	(18.00 ± 0.10) X (25.50 ± 0.10) X (3.10 ± 0.10) mm (e aofia ai le talipupuni u'amea)

Fa'amatalaga:

1. ESP32-WROOM-32UE (IPEX) faʻatasi ma le 8 MB flash poʻo le 16 MB flash o loʻo avanoa mo le faʻatonuga masani.
2. Mo fa'amatalaga auiliili o fa'atonuga, fa'amolemole va'ai Espressif Product Ordering Information.
3. Mo le tele o le fesoʻotaʻiga IPEX, faʻamolemole tagaʻi i le Mataupu 10.

I le totonugalemu o le module o le ESP32-D0WD-V3 chip *. O le pu o lo'o fa'apipi'i ua mamanuina ina ia mafai ona fa'asalaina ma fetuutuuna'i. E lua fatu CPU e mafai ona pulea taʻitoʻatasi, ma o le taimi ole uati ole CPU e mafai ona fetuutuunai mai le 80 MHz i le 240 MHz. E mafai fo'i e le tagata fa'aoga ona tape le PPU ma fa'aaoga le co-processor e maualalo le malosi e mata'ituina ai le peripheral mo suiga po'o le sopoia o faitoto'a. ESP32 e tu'ufa'atasia se seti mauoa o peripherals, e amata mai i le capacitive touch sensors, Hall sensors, SD card interface, Ethernet, SPI maualuga, UART, I²S ma I²C.

Fa'aaliga: Mo fa'amatalaga i numera o vaega o le ESP32 aiga o tupe meataalo, fa'amolemole tagai ile pepa ESP32 User Manual.

O le tuʻufaʻatasia o le Bluetooth, Bluetooth LE ma le Wi-Fi e faʻamautinoa ai e mafai ona taulaʻi le tele o faʻaoga, ma o le module e faʻataʻamilomilo uma: faʻaaogaina le Wi-Fi e mafai ai se tele faʻaletino ma fesoʻotaʻiga tuusaʻo i luga ole Initaneti e ala ile Wi- Fi router, aʻo faʻaogaina le Bluetooth e mafai ai e le tagata faʻaoga ona faʻafesoʻotaʻi lelei i le telefoni poʻo faʻasalalau faʻailoga maualalo malosi mo lona iloa. O le moe i le taimi nei o le ESP32 chip e itiiti ifo i le 5 A, e talafeagai mo le faʻaogaina o le maa ma faʻaogaina mea tau eletise. E lagolagoina e le module se fa'amaumauga e o'o atu i le 150 Mbps. E pei o lea ua ofoina atu e le module faʻamatalaga taʻitaʻia faʻapisinisi ma le faʻatinoga sili ona lelei mo le tuʻufaʻatasia faʻaeletoroni, lautele, faʻaogaina o le eletise, ma fesoʻotaʻiga.

Ole faiga fa'aoga ua filifilia mo le ESP32 ole freeRTOS ma le LwIP; TLS 1.2 faʻatasi ma meafaigaluega faʻavavevave ua fausia foi i totonu. O lo'o lagolagoina fo'i le fa'aleleia o le saogalemu (encrypted) i luga o le ea (OTA), ina ia mafai e tagata fa'aoga ona fa'aleleia a latou oloa e tusa lava pe mae'a ona fa'asa'olotoina, i tau maualalo ma taumafaiga. Laulau 2 o loʻo tuʻuina mai ai faʻamatalaga o le ESP32-WROOM-32UE.

Laulau 2: ESP32-WROOM-32UE Fa'amatalaga

Vaega

Aitema

Fa'amatalaga

Su'ega	Fa'atuatuaina	HTOL/HTSL/uHAST/TCT/ESD
Wi-Fi	Polokalama	802.11 b/g/n 20/n40
		A-MPDU ma le A-MSDU faʻatasi ma le 0.4 s leoleo i totonu- lagolago terval
	Fa'asologa o taimi	2.412 GHz ~ 2.462GHz
Bluetooth	Polokalama	Bluetooth v4.2 BLE faʻamatalaga
	Leitio	NZIF talia ma le –97 dBm lagona
		Vasega-1, vasega-2 ma le vasega-3 transmitter
		AFH
	Leo	CVSD ma SBC
Meafaigaluega	Fa'aoga fa'aoga	SD card, UART, SPI, SDIO, I2C, PWM LED, PWM afi, I2S, IR, fa'atau pulusua, GPIO, masini pa'i capacitive, ADC, DAC
	I luga o le masini masini	Hall sensor
	tioata tu'ufa'atasi	40 MHz tioata
	SPI fa'atasi	4 MB
	PSRAM tu'ufa'atasi	–
	Faʻagaioiga voltage/Sapalai eletise	3.0 V ~ 3.6 V
	La'ititi la'ititi o lo'o tu'uina atu e paoa sapalai	500 mA
	Fautuaina le faiga va'aiga va'aiga	–40 °C ~ 85 °C
	Tele le afifi	(18.00±0.10) mm × (31.40±0.10) mm × (3.30±0.10) mm
	Tulaga maaleale o le susu (MSL)	Laasaga 3

Fa'amatalaga Pin

Pin Fa'atulagaina

Fa'amatalaga Pin
ESP32-WROOM-32UE e 38 pine. Va'ai fa'auigaina pine ile Laulau 3.

Laulau 3: Fa'amatalaga Pin

Igoa	Leai.	Ituaiga	Galuega
GND	1	P	eleele
3V3	2	P	Paoa sapalai
EN	3	I	Fa'ailoga e mafai ona fa'aogaina. Malosi maualuga.
SENSOR_VP	4	I	GPIO36, ADC1_CH0, RTC_GPIO0
SENSOR_VN	5	I	GPIO39, ADC1_CH3, RTC_GPIO3
IO34	6	I	GPIO34, ADC1_CH6, RTC_GPIO4
IO35	7	I	GPIO35, ADC1_CH7, RTC_GPIO5
IO32	8	I/O	GPIO32, XTAL_32K_P (32.768 kHz fa'aoga oscillator tioata), ADC1_CH4, TOUCH9, RTC_GPIO9
IO33	9	I/O	GPIO33, XTAL_32K_N (32.768 kHz oscillator tioata), ADC1_CH5, TOUCH8, RTC_GPIO8
IO25	10	I/O	GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0
IO26	11	I/O	GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1
IO27	12	I/O	GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17, EMAC_RX_DV
IO14	13	I/O	GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2
IO12	14	I/O	GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3
GND	15	P	eleele
IO13	16	I/O	GPIO13, ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID, HS2_DATA3, SD_DATA3, EMAC_RX_ER
NC	17	–	–
NC	18	–	–
NC	19	–	–
NC	20	–	–
NC	21	–	–
NC	22	–	–
IO15	23	I/O	GPIO15, ADC2_CH3, TOUCH3, MTDO, HSPICS0, RTC_GPIO13, HS2_CMD, SD_CMD, EMAC_RXD3
IO2	24	I/O	GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0, SD_DATA0
IO0	25	I/O	GPIO0, ADC2_CH1, TOUCH1, RTC_GPIO11, CLK_OUT1, EMAC_TX_CLK
IO4	26	I/O	GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER
IO16	27	I/O	GPIO16,ADC2_CH8, TOUCH10
IO17	28	I/O	GPIO17,ADC2_CH9, TOUCH11
IO5	29	I/O	GPIO5, VSPICS0, HS1_DATA6, EMAC_RX_CLK
IO18	30	I/O	GPIO18, VSPICLK, HS1_DATA7

Igoa	Leai.	Ituaiga	Galuega
IO19	31	I/O	GPIO19, VSPIQ, U0CTS, EMAC_TXD0
NC	32	–	–
IO21	33	I/O	GPIO21, VSPIHD, EMAC_TX_EN
RXD0	34	I/O	GPIO3, U0RXD, CLK_OUT2
TXD0	35	I/O	GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2
IO22	36	I/O	GPIO22, VSPIWP, U0RTS, EMAC_TXD1
IO23	37	I/O	GPIO23, VSPID, HS1_STROBE
GND	38	P	eleele

Fa'aaliga: GPIO6 i le GPIO11 e fesoʻotaʻi i le SPI flash faʻapipiʻi i luga o le module ma e le o fesoʻotaʻi i fafo.

Fa'amauina pine
ESP32 e lima pine faʻamau, lea e mafai ona vaʻaia i le Mataupu 6 Schematics:

• MTDI
• GPIO0
• GPIO2
• MTDO
• GPIO5

E mafai e le polokalame ona faitau le tau o nei vaega e lima mai le resitala "GPIO_STRAPPING".

• I le taimi o le toe setiina o le masini masini (power-on-reset, RTC watchdog reset ma brownout reset), o faamau o pine sample voltagu fa'atusa e pei o ni fa'amau fa'apipi'i o le "0" po'o le "1", ma taofi nei pusi se'ia o'o i lalo pe tapuni le pu. O le strapping bits configure le faiga ta'avale a le masini, le galuega voltage o le VDD_SDIO ma isi faʻatulagaga faʻavae muamua.
• E feso'ota'i fa'amau ta'itasi i lona toso i luga/soso i lalo i le taimi o le toe setiina o le pu. O le mea lea, afai e le fesoʻotaʻi se pine faʻapipiʻi poʻo le fesoʻotaʻiga i fafo e maualuga le faʻalavelave, o le toso i luga / toso i lalo vaivai i totonu o le a fuafua ai le tulaga le faʻaogaina o pine faʻamau.
• Ina ia suia le strapping bit values, e mafai e tagata faʻaoga ona faʻaogaina le toso i lalo / toso i luga tetee, pe faʻaaoga GPIO a le MCU e pulea ai le vol.tagle maualuga o nei pine pe a fa'aola ile ESP32.
• A mae'a toe fa'asa'oloto, o pine fa'amau e galue e pei o pine masani.
• Va'ai i le Laulau 4 mo se fa'avasegaga fa'a-fa'a-fa'a-fa'aa'e e ala i fa'amau fa'amau.

Laulau 4: Fa'amau Fa'amau

Voltage ole LDO i totonu (VDD_SDIO)
Pin	Fa'atonu	3.3 V	1.8 V
MTDI	Toso i lalo	0	1

Faiga Fa'avae
Pin	Fa'atonu	SPI Boot		La'u mai le Boot
GPIO0	Toso i luga	1		0
GPIO2	Toso i lalo	Ou te le kea		0
Fa'agaoioiga/Ta'e le Debugging Log Lolomi i luga ole U0TXD A'o Fa'aosoina
Pin	Fa'atonu	U0TXD Active		U0TXD Lemu
MTDO	Toso i luga	1		0
Taimi ole Pologa SDIO
Pin	Fa'atonu	Pa'u pito Sampling Fa'ai'uga Fa'asolo	Pa'u pito Sampling Fa'atupuina Fa'aola	Tulaga maualuga Sampling Fa'ai'uga Fa'asolo	Tulaga maualuga Sampling Fa'atupuina Fa'aola
MTDO	Toso i luga	0	0	1	1
GPIO5	Toso i luga	0	1	0	1

Fa'aaliga:

• E mafai e Firmware ona faʻapipiʻi resitara bits e sui ai tulaga o le "Voltage o le LDO i totonu (VDD_SDIO)” ma le “Taimi o le SDIO Slave” pe a uma ona taʻavale.
• Fa'alotoifale toso i luga tete'e (R9) mo MTDI e le o fa'atumuina i totonu o le module, aua o le moli ma le SRAM i le ESP32-WROOM-32UE e na'o le lagolagoina o le vol mana.tage o le 3.3 V (fa'aulu mai VDD_SDIO)

Fa'amatalaga Fa'atino

O lenei mataupu o loʻo faʻamatalaina ai modules ma galuega faʻapipiʻi i le ESP32-WROOM-32UE.

PPU ma le Fa'alotoifale
ESP32-D0WD-V3 o lo'o i ai ni microprocessors Xtensa 32-bit LX6 maualalo e lua. O le manatua i totonu e aofia ai:

• 448 KB o le ROM mo le faʻauluina ma galuega autu.
• 520 KB ole SRAM i luga ole masini mo fa'amaumauga ma fa'atonuga.
• 8 KB o le SRAM i le RTC, lea e taʻua o le RTC FAST Memory ma e mafai ona faʻaoga mo le teuina o faʻamaumauga; e maua e le PPU autu i le taimi o le RTC Boot mai le Deep-sleep mode.
• 8 KB o le SRAM i le RTC, lea e taʻua o le RTC SLOW Memory ma e mafai ona maua e le co-processor i le taimi o le Deep-sleep mode.
• 1 Kbit o le eFuse: 256 bits o loʻo faʻaaogaina mo le faiga (MAC address ma chip configuration) ma o totoe 768 bits o loʻo faʻaagaga mo talosaga a tagata faatau, e aofia ai le flash-encryption ma chip-ID.

Fafo i fafo ma SRAM
ESP32 lagolagoina le tele o fafo QSPI flash ma SRAM meataalo. E mafai ona maua nisi fa'amatalaga ile Mataupu SPI ile ESP32 Technical Reference Manual. E fa'apea fo'i ona lagolagoina e le ESP32 le fa'ailogaina/fa'ailogaina o masini e fa'avae i luga ole AES e puipuia ai polokalame ma fa'amaumauga a le au atia'e ile flash.

ESP32 e mafai ona maua le QSPI flash ma le SRAM i fafo e ala i le maualuga-saosaoa caches.

• O le moli i fafo e mafai ona fa'afanua i le CPU fa'atonuga e manatua avanoa ma faitau-na'o avanoa manatua i le taimi e tasi.
  • A fa'afanua le moli mai fafo ile avanoa manatua ole CPU, e o'o ile 11 MB + 248 KB e mafai ona fa'afanua ile taimi. Manatua afai e sili atu nai lo le 3 MB + 248 KB o loʻo faʻafanua, o le a faʻaitiitia le faʻaogaina o le cache ona o faʻamatalaga taumatemate e le PPU.
  • A fa'afanua le moli mai fafo i le avanoa e manatua ai fa'amaumauga, e o'o atu i le 4 MB e mafai ona fa'afanua i le taimi. 8-bit, 16-bit ma le 32-bit faitau e lagolagoina.
• O le SRAM fafo e mafai ona fa'afanua i totonu o le CPU fa'amaumauga fa'amaumauga avanoa. E oo atu ile 4 MB e mafai ona fa'afanua ile taimi. 8-bit, 16-bit ma le 32-bit faitau ma tusitusi e lagolagoina.

ESP32-WROOM-32UE e tu'ufa'atasia se 4 MB SPI fa'apipi'i le tele o avanoa manatua.

Oscillators tioata

O loʻo faʻaogaina e le module se oscillator tioata 40-MHz.

RTC ma le Pulea Maualalo
Faatasi ai ma le faʻaogaina o tekinolosi faʻaonaponei malosi, e mafai e le ESP32 ona fesuiaʻi i le va o auala eseese. Mo fa'amatalaga i le fa'aogaina o le paoa a le ESP32 i auala eseese, fa'amolemole fa'afeso'ota'i le vaega "RTC ma Low-Power Management" ile ESP32 User Manual.

Peripherals ma Sensors
Fa'amolemole va'ai i le Vaega Pisinisi ma Sensors i le ESP32 User Manual.

Fa'aaliga: O feso'ota'iga i fafo e mafai ona faia i so'o se GPIO se'i vagana GPIO i le va'aiga 6-11, 16, po'o le 17. GPIOs 6-11 e feso'ota'i i le moli SPI tu'ufa'atasi a le module. Mo fa'amatalaga, fa'amolemole va'ai le Vaega 6 Fa'asologa.

Uiga faaeletise

Fa'atonu aupito maualuga
O fa'amalosi i tua atu o fa'atonuga aupito maualuga o lo'o lisi atu i le laulau o lo'o i lalo e ono fa'aleagaina tumau ai le masini. E na'o fa'atonuga fa'amamafa ia, ma e le fa'asino i le fa'agaioiga o le masini e tatau ona mulimulita'i i tulaga fa'atonu.

Fuafuaga 5: Fa'ailoga Maualuluga

1. Na galue lelei le module ina ua maeʻa se suʻega 24-itula i le vevela vevela i le 25 °C, ma le IOs i vaega e tolu (VDD3P3_RTC, VDD3P3_CPU, VDD_SDIO) e maua ai le maualuga maualuga i le eleele. Faamolemole ia matau o pine o lo'o nofoia e le moli ma/po'o le PSRAM i le VDD_SDIO power domain sa le'i aofia ai mai le su'ega.
2. Fa'amolemole va'ai le Fa'aopoopo IO_MUX o le ESP32 User Manual mo le IO's power domain.

Tulaga Fautuaina o Galuega

Laulau 6: Tulaga Fautuaina o Galuega

Faailoga	Parameter	Min	masani	Max	Vaega
VDD33	Paoa sapalai voltage	3.0	3.3	3.6	V
I V DD	O le taimi nei e tu'uina atu e le sapalai eletise mai fafo	0.5	–	–	A
T	O le vevela o galuega	–40	–	85	°C

Uiga DC (3.3 V, 25 °C)

Laulau 7: Uiga DC (3.3 V, 25 °C)

Faailoga	Parameter		Min	Ituaiga	Max	Vaega
C IN	Pin capacitance		–	2	–	pF
V IH	Tulaga maualuga voltage		0.75×VDD1	–	VDD1 + 0.3	V
V IL	Tulaga maualalo voltage		–0.3	–	0.25×VDD1	V
I IH	Tulaga maualuga fa'aoga i le taimi nei		–	–	50	nA
I IL	Tulaga maualalo o lo'o i totonu o le taimi nei		–	–	50	nA
V OH	Tulaga maualuga voltage		0.8×VDD1	–	–	V
V OL	Tulaga maualalo voltage		–	–	0.1×VDD1	V
I OH	Tulaga maualuga puna o iai nei (VDD1 = 3.3 V, VOH >= 2.64 V, fa'atūina le malosi o le ta'avale i le maualuga)	VDD3P3_CPU vaega malosi 1; 2	–	40	–	mA
		VDD3P3_RTC vaega malosi 1; 2	–	40	–	mA
		VDD_SDIO vaega malosi 1; 3	–	20	–	mA

Faailoga	Parameter	Min	Ituaiga	Max	Vaega
I OL	Fa'asolo i lalo o le vai (VDD1 = 3.3 V, VOL = 0.495 V, fa'atonu le malosi o le ta'avale i le maualuga)	–	28	–	mA
R P U	Tetee o le toso i luga tetee i totonu	–	45	–	kΩ
R P D	Tetee o le toso i lalo tetee i totonu	–	45	–	kΩ
V IL_nRST	Tulaga maualalo voltage o le CHIP_PU e tape le pu	–	–	0.6	V

Fa'amatalaga:

1. Fa'amolemole va'ai le Fa'aopoopo IO_MUX o le ESP32 User Manual mo le IO's power domain. VDD o le I/O voltage mo se vaega malosi o pine.
2. Mo le VDD3P3_CPU ma le VDD3P3_RTC vaega malosi, o pine o lo'o maua mai i le vaega lava e tasi e faasolosolo malie ona fa'aitiitia mai le 40 mA i le 29 mA, VOH> = 2.64 V, a'o fa'atupula'ia le aofa'i o pine fa'apogai.
3. O pine o lo'o nofoia e le moli ma/po'o le PSRAM i le VDD_SDIO power domain na le aofia ai mai le su'ega.

Leitio Wi-Fi

Siata 8: Uiga Leitio Wi-Fi

Parameter	Tulaga	Min	masani	Max	Vaega
Feso'ota'iga fa'agaoioi fa'amatalaga1	–	2412	–	2462	MHz
Fa'alavelave fa'aletonu fa'amatalaga2	–	–	*	–	Ω
TX mana fa'amatalaga3	–	802.11b:24.16dBm;802.11g:23.52dBm dBm 802.11n20:23.01dBm;802.11n40:21.18dBm
Ma'ale'ale	11b, 1 Mbps	–	–98	–	dBm
	11b, 11 Mbps	–	–89	–	dBm
	11g, 6 Mbps	–	–92	–	dBm
	11g, 54 Mbps	–	–74	–	dBm
	11n, HT20, MCS0	–	–91	–	dBm
	11n, HT20, MCS7	–	–71	–	dBm
	11n, HT40, MCS0	–	–89	–	dBm
	11n, HT40, MCS7	–	–69	–	dBm
Te'ena le alavai lata ane	11g, 6 Mbps	–	31	–	dB
	11g, 54 Mbps	–	14	–	dB
	11n, HT20, MCS0	–	31	–	dB
	11n, HT20, MCS7	–	13	–	dB

1. E tatau ona fa'agaoioi le masini i le fa'asologa o alaleo ua fa'asoa mai e pulega fa'aitulagi fa'atonutonu. Ole fa'asologa ole fa'agaioiga ole fa'agaoioiga e mafai ona fa'atulaga e polokalame.
2. Mo modules o loʻo faʻaaogaina antennas IPEX, o le faʻaogaina o le gaioiga e 50 Ω. Mo isi modules e aunoa ma IPEX antennas, e le manaʻomia e tagata faʻaoga ona popole e uiga i le faʻaogaina o galuega.
3. O le mana TX Target e mafai ona faʻatulagaina e faʻavae i luga o masini poʻo manaʻoga faʻamaonia.

Leitio Bluetooth/BLE

Talia

Laulau 9: Uiga o le Taliaina - Bluetooth/BLE

Parameter	Tulaga	Min	Ituaiga	Max	Vaega
Ma'ale'ale @30.8% PER	–	–	–97	–	dBm
Fa'ailoga maualuga maua @30.8% PER	–	0	–	–	dBm
Auala fa'atasi C/I	–	–	+10	–	dB
Filifiliga alavai lata ane C/I	F = F0 + 1 MHz	–	–5	–	dB
	F = F0 – 1 MHz	–	–5	–	dB
	F = F0 + 2 MHz	–	–25	–	dB
	F = F0 – 2 MHz	–	–35	–	dB
	F = F0 + 3 MHz	–	–25	–	dB
	F = F0 – 3 MHz	–	–45	–	dB
Fa'atino poloka poloka fafo	30 MHz ~ 2000 MHz	–10	–	–	dBm
	2000 MHz ~ 2400 MHz	–27	–	–	dBm
	2500 MHz ~ 3000 MHz	–27	–	–	dBm
	3000 MHz ~ 12.5 GHz	–10	–	–	dBm
Fetuunaiga	–	–36	–	–	dBm

Transmisi

Laulau 10: Uiga Fa'asalalau – Bluetooth/BLE

Parameter	Tulaga	Min	Ituaiga	Max	Vaega
Maua le laasaga pulea	–	–	3	–	dBm
RF mana	–	BT3.0:7.73dBm BLE:4.92dBm			dBm
O le alavai lata ane e felauai le mana	F = F0 ± 2 MHz	–	–52	–	dBm
	F = F0 ± 3 MHz	–	–58	–	dBm
	F = F0 ± > 3 MHz	–	–60	–	dBm
∆ f1avg	–	–	–	265	kHz
∆ f2 maualuga	–	247	–	–	kHz
∆ f2avg/∆ f1avg	–	–	–0.92	–	–
ICFT	–	–	–10	–	kHz
Fa'ase'e fua	–	–	0.7	–	kHz/50s
tafetafea	–	–	2	–	kHz

Reflow Profile

Toe Iloilo Tala'aga

Aso	Fa'aliliuga	Fa'asalalauga fa'amatalaga
2020.02	V0.1	Fa'asalalau muamua mo le fa'amaonia CE.

Taiala OEM

1. Tulafono Fa'atatau FCC O lenei module e fa'atagaina e ala i le Fa'atagaga Fa'afuainumera Tasi. E ogatasi ma mana'oga o le FCC vaega 15C, vaega 15.247 tulafono.
2. Tulaga fa'aoga fa'apitoa E mafai ona fa'aogaina lenei module i masini IoT. O le fa'aoga voltage i le module e fa'aigoaina 3.0V-3.6 V DC. O le vevela ambient faagaoioia o le module e -40 i le 85 tikeri C. Na o le faʻapipiʻiina antenna PCB e faatagaina. So'o se isi lava antenna i fafo e fa'asa.
3. Ta'iala fa'atapula'a fa'atino N/A
4. Su'e le mamanu antenna N/A
5. Fuafuaga fa'aalia RF O mea faigaluega e ogatasi ma tapula'a fa'avevela a le FCC ua fa'atulagaina mo se si'osi'omaga le pulea. O meafaigaluega nei e tatau ona fa'apipi'i ma fa'agaioi ile la'ititi la'ititi ole mamao ole 20cm ile va ole fa'avevela ma lou tino. Afai o meafaigaluega e fausia i totonu o se talimalo e pei o se faʻaoga feaveaʻi, o le faʻaopoopoga RF faʻaalia iloiloga atonu e manaʻomia e pei ona faʻamaonia e le 2.1093.
6. Antenna
   Ituaiga antenna: Dipole antenna ma le IPEX so'oga; Manuia maualuga: 4.4dBi
7. Fa'ailoga ma fa'amatalaga tausisia O se fa'ailoga pito i fafo i le oloa fa'ai'uga a le OEM e mafai ona fa'aogaina fa'amatalaga e pei o lea: “O lo'o i ai le Fa'aliliuga FCC ID: 2AVCN-NWPXXX” po'o
   “E iai FCC ID: 2AVCN-NWPXXX.”
8. Fa'amatalaga i faiga su'ega ma mana'oga fa'aopoopo mo su'ega
   • a)O le transmitter modular ua maeʻa faʻataʻitaʻiina e le module grantee i luga o le numera manaʻomia o auala, ituaiga modulation, ma modes, e le tatau ona manaʻomia mo le faʻapipiʻi talimalo e toe suʻe uma auala faʻasalalau avanoa poʻo tulaga. E fautuaina le kamupani gaosi oloa, faʻapipiʻi le transmitter modular, faia ni fua suʻesuʻe e faʻamaonia ai o le mea e maua mai ai le faiga e le sili atu i tapulaʻa faʻafefe poʻo tapulaʻa pito (faʻataʻitaʻiga, pe a ese le antenna e ono mafua ai faʻaopoopoga faʻaoso).
   • b)O le su'ega e tatau ona siaki mo mea e mafai ona tupu ona o le fefiloi o mea fa'aoso ma isi transmitters, fa'asologa numera, po'o mea fa'aletino o le oloa talimalo (fa'alavelave). O lenei suʻesuʻega e sili ona taua pe a tuʻufaʻatasia le tele o transmitters modular lea e faʻavae ai le tusipasi i le suʻeina o latou taʻitasi i se faʻatulagaga tutoʻatasi. E taua le maitauina e le tatau i tagata gaosi oloa talimalo ona manatu e faapea ona o le transmitter modular ua faʻamaonia e leai so latou tiute mo le tausisia o oloa mulimuli.
   • c)Afai o le suʻesuʻega e faʻaalia ai se popolega o le tausisia e le kamupani gaosi oloa talimalo e tatau ona faʻaitiitia le mataupu. O oloa fa'afeiloa'i e fa'aogaina ai le fa'aogaina fa'apitoa e fa'atatau i tulafono fa'apitoa fa'apitoa ta'ito'atasi fa'apea ma tu'utu'uga lautele o le fa'agaioiga i Vaega 15.5, 15.15, ma le 15.29 ina ia aua ne'i fa'alavelave. O le tagata fa'afoe o le oloa talimalo o le a tatau ona taofi le fa'aogaina o le masini se'i vagana ua fa'asa'o le fa'alavelave.
9. Su'ega fa'aopoopo, Vaega 15 Vaega B fa'ate'aina O le tu'ufa'atasiga mulimuli / module e mana'omia ona iloilo fa'asaga i le FCC Vaega 15B ta'iala mo radiators e le'i mafaufauina ina ia fa'atagaina lelei mo le fa'agaioiga o se masini numera Vaega 15.

E tatau i le tagata faʻapipiʻi faʻapipiʻi faʻapipiʻi lenei module i totonu oa latou oloa e tatau ona faʻamautinoa e ogatusa le oloa tuʻufaʻatasia mulimuli ma manaʻoga FCC e ala i se iloiloga faʻapitoa poʻo se iloiloga i tulafono a le FCC, e aofia ai le faʻaogaina o le transmitter ma e tatau ona faʻasino ile taʻiala ile KDB 996369. Mo oloa talimalo faʻamaonia transmitter modular, o le tele taimi ole su'esu'ega o le faiga tu'ufa'atasi o lo'o fa'amaoti mai ile tulafono ile Vaega 15.33(a)(1) e o'o ile (a)(3), po'o le va'aiga e fa'atatau ile masini numera, e pei ona fa'aalia ile Vaega 15.33(b) (1), po'o fea lava le maualuga o le tele o su'esu'ega Pe a fa'ata'ita'i le oloa talimalo, e tatau ona fa'agaoioia uma transmitters. E mafai ona fa'agaoioia transmitters e ala i le fa'aogaina o ta'avale avanoa lautele ma fa'aola, ina ia fa'agaoioia le transmitters. I nisi tulaga atonu e talafeagai le fa'aogaina o se pusa telefoni fa'apitoa fa'atekonolosi (seti su'ega) lea e le maua ai mea fa'aoga 50 masini po'o avetaavale. Pe a suʻesuʻe mo faʻamalo mai le radiator e leʻi mafaufauina, e tatau ona tuʻu le transmitter i le auala e maua ai poʻo le faʻaogaina, pe a mafai. Afai e na'o le auala e maua ai e le mafai, o le leitio e tatau ona fa'agasolo (sili i ai) ma/po'o le su'esu'e malosi. I nei tulaga, e mana'omia le fa'agaoioi o le PUS feso'ota'iga (ie, PCIe, SDIO, USB) e fa'amautinoa ai o lo'o fa'agaoioia le ta'avale fa'apolokalame e le'i mafaufauina. Atonu e mana'omia e falesu'esu'e su'esu'e le fa'aopoopoina o le fa'alumaina po'o le fa'amama e fa'atatau i le malosi fa'ailo o so'o se fa'ailo ola (pe a talafeagai) mai le leitio fa'aogaina. Va'ai ANSI C63.4, ANSI C63.10 ma ANSI C63.26 mo nisi fa'amatalaga lautele o su'ega.

O le oloa o lo'o fa'ata'ita'iina e tu'u i totonu o se so'oga/so'oga ma se masini faipaaga, e tusa ai ma le fa'aoga masani o le oloa. Ina ia faʻafaigofie le suʻega, o le oloa o loʻo faʻataʻitaʻiina e faʻapipiʻi e tuʻuina atu i se taamilosaga maualuga, e pei o le auina atu o se file po'o le fa'asalalauina o nisi fa'asalalauga.

Lapataiga FCC

So'o se Suiga po'o ni suiga e le'i fa'amaonia manino e le itu e nafa ma le usita'ia e mafai ona fa'aleaogaina le pule a le tagata fa'aoga e fa'agaioi ai masini.

O lenei masini e tausisia le vaega 15 o Tulafono FCC. O le fa'agaioiga e fa'atatau i tulaga nei e lua:

1. O lenei masini e le mafai ona fa'alavelave fa'alavelave,
2. E tatau ona talia e lenei masini so'o se fa'alavelave e maua, e aofia ai fa'alavelave e ono fa'atupu ai le le mana'omia

Pepa / Punaoa

TINYTRONICS ESP32-WROOM-32UE Modules ma PCB Antenna [pdf] Tusi Taiala 2AVCN-NWPXXX, 2AVCNNWPXXX, nwpxxx, ESP32-WROOM-32UE, ESP32-WROOM-32UE Modules ma PCB Antenna, Modules ma PCB Antenna, PCB Antenna, Antenna

Fa'asinomaga

• Tusi Taiala