TickTime TK3 Timer Instruction Manual

TickTime TK3 Timer Instruction Manual

Fa'amatalaga o oloa

Mata fa'aali luma

Fa'avae (filifiliga)

Tua

1. Digital side
2. On/off button (back)
3. Clock button (back)
4. Alarm button (back)
5. Volume button (back)
6. Magnetic charging port for Xiao Tian Cai watches
7. TYPE-C uafu fa'atumu
8. faamau teuteu
9. faamau o le Uati
10. Ki/off button
11. Encoder
12. Fa'amau leo
13. Alarm button.

Faatonuga

1. Malosiaga

Oomi pu'upu'u le fa'amau o le on/off fa'aola.

II. Power Off

Oomi umi le faamau i luga/taoti , to power off.

III. Set the Clock

When powered on, the display screen shows 00:00 Wed 1-1.
(Default: Wednesday, January 1, 2025)
Oomi umi le faamau o le uati to make the year 2025 flash; rotate the encoder to adjust the year.
Short press the encoder to make the month flash; rotate the encoder to adjust the month.
Short press the encoder to make the date flash; rotate the encoder to adjust the date.
Short press the encoder to make the hour flash; rotate the encoder to adjust the hour.
Short press the encoder to make the minute flash; rotate the encoder to adjust the minute.
Short press the encoder to complete the setting.

IV. Set the Alarm (Up to 3 alarms can be set)

1. Fa'amatalaga:
   a. In clock mode, short press the alarm button to view the 3 alarm groups. Long press the alarm button to activate the current alarm group.
   b. Displays – Alarm is on, displays 1 Alarm is off. In alarm mode, rotate the encoder clockwise to turn on the alarm, and rotate it counter clock wise to turn off the alarm.

   

   

2. Auala fa'agaioiga:
   When the display screen shows the current clock status, long press the alarm button to display the alarm 1 icon . The hour will start flashing; rotate the encoder to adjust the hour. Short press the encoder, and the minute will start flashing; rotate the encoder to adjust the minute. Short press the encoder to complete the setting.
   Short press the alarm button to display alarm 2. Then, long press the alarm button as described above to set alarm 2 and alarm 3.

V. Countdown Instruction

1. Fast Countdown:
   Flip any digital side to face upwards to quickly start a countdown. Available countdown times: 5 minutes, 10 minutes, 30 minutes, and 60 minutes.
   Starts 5-minute countdown
   
2. Custom Countdown
   When the digital side 30 is facing upwards, a 30-minute countdown starts. Short press the encoder, then rotate the encoder to adjust the minute. The maximum setting is 99:00. Once the setting is complete, short press the encoder to start the countdown (if no action is taken, the countdown will start automati-cally after 5 seconds).
   Fa'aaliga: During the countdown, short press the encoder to pause; long press the encoder to reset to zero.
3. TickTime Productivity Technique Setup
   Place the digital side 5 up to start the 5-minute countdown. Long press the encoder to enter the TickTime productivity technique mode, and the 25-minute countdown will start.
   TickTime productivity technique mode
   
   TickTime productivity technique introduction:
   One TickTime productivity technique lasts for 30 minutes, consisting of 25 minutes of work( icon is red) and 5 minutes of rest ( icon is blue). This cycle repeats 4 times, totaling 4 TickTime productivity techniques.
   1st TickTime productivity technique
   
   2nd TickTime productivity technique
   
   3rd TickTime productivity technique
   
   4th TickTime productivity technique
   
4. Faitauina i luga
   In clock mode, short press the encoder to start counting up.
5. Taofi
   During the timing process(countup/count-down), flip the display screen face-up to pause the timing. (Note: If no action is taken within 5 minutes after pausing, the device will automatically switch to clock mode.) Flip it to any digital side face-up to resume the timing. After the timing ends, if no action is taken, the device will switch to clock mode.
   Flip the display screen to face upwards
   
6. Switching from Timing Mode to Clock Mode
   a. In timing mode (countup/countdown), flip the display screen to face down, then flip it back upwards or with the digital side facing up to switch to clock mode. (Note: When the display screen is face down, the device can switch to clock mode within 30 seconds; if held face down for more than 30 seconds, the device will turn off.)
   Flip the display screen to face down
   Flip the digital side to face up
   
   b. In timing mode (countup/countdown), short press the encoder to pause; short press any of the other four buttons on the back of the device to switch to clock mode.
7. Fetuunaiga o le Volume
   Short press the volume button to cycle through the following settings in order: Mutex, Vibration, Volume Level 1, Volume Level 2, Volume Level 3,
8. Totogiina
   a. The base has a magnetic charging port to charge the timer
   b. The timer has a TYPE-C charging port, and it supports charging with a charger with PD function. (Manatua: During charging, the battery icon will cycle from 1 bar to 3 bars, and once fully charged, the battery icon will show 3 bars.)
9. Pipi
   a. When the alarm rings; the buzzer will beep continuously for 60 seconds. Short press any button to stop.
   b. When the countdown ends, the buzzer will beep at different speeds: slow beeping for 1-10 seconds, medium beeping for 11-30 seconds, and fast beeping for 31-60 seconds. During the beeping, flip the device or short press any button to stop.

Fua Fa'atatau

Fa'ata'ita'iga: TK3
Oloa mamafa mama: E tusa ma le 183g
Base net weight: E tusa ma le 56g
atigi: PC + ABS material
Auala pulea: Button + gyroscope sensor
Malosiaga ma'a: 1400mAh
Totogi o lo'o iai nei: 5V/1A (Max)
Standby time (device powered off): 6 masina
Taimi e totogi ai: 2~3 T.A

Fua Fa'atatau

Paoa sapalai: USB-C sapalai eletise
Tele oloa: 64*64*59mm(excluding packaging)
Tele fa'avae: 94*72*24 mm(excluding packaging)
Tulaga faatonuina Pulega: Q/LJNJS 001-2025
Lisi o oloa: Product*1, power cord*1, user manual*1, charging base (optional)
Nofoaga na tupuga mai ai: Guangdong, Saina

tuatusi kamupani: Room 203, Building B, Minle
Science and Technology Park, Minzhi Street, Longhua District, Shenzhen

Webnofoaga: www.ticktime.com

Kata Faamaonia

For your rights and interests, please fill in the details and keep it properly. This copy is used as a proof before maintenance:

Igoa fa'aoga:
Tuatusi o tagata:
Numera o le itu malo:
Numera fa'afeso'ota'i:
I-meli:
Aso fa'atau/numera oka:
Return reason:

Product after-sales warranty service: 365 days. (Manatua: gift accessories are not covered by the warranty)