TECH F21 Mini Printer
Fa'amatalaga
- Tekinolosi lomitusi: Thermal printing (inkless)
- Ituaiga lolomi: uliuli & paepae
- Ituaiga Pepa: Ta'avale pepa vevela
- Lautele Pepa: 57 mm
- Lomiga I'uga: 203 DPI
- Saosaoa lolomi: Approx. 10–15 mm/s
- Feso'ota'i: Bluetooth
- Meafaigaluega talafeagai: Android, iOS
- Apps Lagolago: Dedicated mobile printing app (varies by region)
- Ituaiga maa: Maa lithium e mafai ona toe faʻaaogaina
- Malosi maa: ~1000mAh
- Metotia o Totogi: USB (Type-C or Micro-USB, model dependent)
- Faagaioiga Voltage: 5V
- Mea: ABS palasitika
- Tele: Compact / portable
- mamafa: Lightweight (approx. 150–200 g)
- Supported Printing: Text, images, labels, QR codes, barcodes
Fa'afitauli
E le o ki le lomitusi
- Ia mautinoa ua uma le maa.
- Taumafai se isi uaea USB po'o le puna eletise.
- Press and hold the power button for 3–5 seconds.
Le feso'ota'i le Bluetooth
- Turn Bluetooth OFF and ON again on your phone.
- Ensure the printer is not connected to another device.
- Reinstall or update the printer app.
- Keep the printer within 1–2 meters during pairing.
Blank or unclear printing
- Check that thermal paper is loaded correctly (print side facing out).
- Use compatible thermal paper only.
- Clean the print head gently.
- Ensure battery level is sufficient.
Paper not feeding properly
- Reinstall the paper roll correctly.
- Avoid overloading the paper compartment.
- Remove jammed paper carefully.
App e le tali
- Tapuni ma toe tatala le app.
- Check app permissions (Bluetooth, storage).
- Toe amata lau telefoni.
Tausiga ma Tausiga
- Fa'aoga only recommended thermal paper to avoid print head damage.
- Keep the printer dry and away from heat or direct sunlight.
- Clean the print head periodically with a soft, dry cloth.
- Do not pull paper forcefully while printing.
- Charge the battery at least once every 2–3 months if not in use.
- Avoid dropping or applying pressure to the device.
- Store in a dust-free environment when not in use.
Folasaga o oloa
1.1 Lisi afifi
O The quantity and specifications of the paper roll(s) are tailored to the package you’ve chosen.
1.2 Faatonuga Vaega Lomitusi
Amataina
2.1 La'uina o le App
Saili mo the “FaithTag” app on App Store@ or Google PlayTM for download and installation.
2.2 Taiala a le Tagata
O Before starting printing, please ensure that the paper roll is properly loaded into the paper compartment. For detailed instructions, refer to the manual section “3. Replacing the Paper Roll.”
Ina ia ki le lomitusi, oomi umi le Pule Malosi mo le tolu sekone seia oo ina ola le Moli Fa'ailoga.
Open the “FaithTag"App. 
Tuuina atu faatagaga.
Kiliki [Connect] i le pito i luga.
Connection complete. Tap the homepage to view scriptures.
View scripture details, then tap print.
Access preview, then tap [Print].
Ua maea le lolomiina.
Ta'e ese le fa'ailoga i le Pepa Ulufa'i.
Aveese le tua.
Fa'amau le fa'ailoga i luga o se fa'amago mafolafola.
O le polokalame fa'akomepiuta e mo na'o fa'amatalaga. Fa'amolemole fa'afeso'ota'i le itulau fa'agaioiga moni mo fa'amatalaga sa'o.
Suia le Lola Pepa
Aveese i fafo se taaiga pepa fou.
O Please skip this step if the paper roll you have is not newly purchased and boxed.
Push the Cover Open Button towards the arrow to take out the Paper RollSpindle.
Toso le feaveai oamper to remove the paper roll to be replaced.
Some paper rolls include tubes. Remove the paper tube after running out.
Fa'aofi se vaega se tasi o le milo i totonu o le lola pepa e fa'apipi'i.
Toe fa'apipi'i le Movable Damper ma tulei i le pito o le lola pepa.
Aveese le Anti-loosening Sticker mai le lola pepa.
Tuu le taaiga pepa i totonu o le Vaega Pepa.
Toso le Ta'avale Pepa i fafo se'ia o'o atu i tala atu o le Pepa Fa'aulufale Slot, ona tapuni lea o le Ufi Su'e.
Faatonuga Saogalemu
5.1 Fa'atonuga mo le tipi tipi ma le Lomitusi
Warning: Sharp edges on Manual Cutter! Do not touch the edges.
Warning: HOT component! Touching it when it is hot can cause burns to your fingers. Please wait for at least 30 minutes after turning off the power before touching it.
5.2 Fa'atonuga mo le Totogiina
1. Please prepare your own power adapter (DC 5V/2A) with a Type-A port.
2. Insert the Type-C end (flat end) of the USB cable into F21’s Type-C Charger Port and plug the Type-A end (wide end) into the Type-A port of the power adapter.
3. After connecting and plugging in, please check the status of the printer indicator light. When the printer is charging, the indicator light will be flashing slowly with a “white light”.
4. Please charge for at least 20 minutes to meet quick usage; charging for 2-3 hours will complete the charging, or the following two states indicate full charge:when turned on, the indicator light stays “white”; when turned off, the light goes out.
5. As the printer may heat up during charging, avoid placing it on materials such as cotton or linen.
6. Once the battery is fully charged, please unplug the charger promptly.
O Avoid using the printer while charging.Using the printer while charging may lead to reduced charging speed, compromised print quality, and shortened battery life.
5.3 Fa'amamā ma Tausiga
O Please make sure the printer is turned off before performing any cleaning or maintenance.
Afai e te fetaia'i ma fa'afitauli e pei o laina avanoa, lolomi faanenefu, po'o mataitusi misi, atonu e mafua mai i le palapala i luga o le Ulu Lomitusi. Fa'amolemole mulimuli i laasaga nei:
If you have just finished printing, wait for at least 30 minutes for the Print
01 Head to cool down completely. Use a cotton swab dipped in alcohol or a print head cleaning pen (purchased
02 separately) to gently wipe the surface of the Print Head about 5 times to remove any dust and stains. Wait 5-10 minutes for the alcohol to evaporate completely. Thus, the cleaning
03 is done, and you can continue using the printer.
Fa'amatalaga ile Tagata fa'aoga
6.1 FCC LAPATAIGA
O lenei masini e tausisia le vaega 15 o Tulafono FCC.
Operation is subject to the ollowing two conditions:
(1) e le mafai e lenei masini ona fa'alavelave fa'alavelave, ma
(2) e tatau i lenei masini ona talia so'o se fa'alavelave e maua, e aofia ai fa'alavelave e ono fa'atupu ai le fa'agaioiga le mana'omia.
So'o se suiga po'o suiga e le'i fa'amaonia manino e le itu e nafa ma le usita'ia e mafai ona fa'aleaogaina le pule a le tagata fa'aoga e fa'agaioi ai masini.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely tocause harmful interference in which case the user will be required to correct the interference at his own expense.
Ua mae'a su'esu'eina le masini ina ia fetaui ma fa'amatalaga lautele o le fa'aaliga RF.
E mafai ona fa'aoga le masini ile tulaga fa'aalia feavea'i e aunoa ma se tapula'a.
6.2 ISED NOTICE(Kanata)
- Igilisi:
This device contains licence-exempt that comply with Innovation, Science and Economic Development Canada’ s licence-exempt RSS(s).
O le fa'agaioiga e fa'atatau i tulaga nei e lua:
(1) E le mafai e lenei masini ona fa'alavelave.
(2) E tatau i lenei masini ona talia so'o se fa'alavelave, e aofia ai fa'alavelave e ono fa'atupu ai le fa'agaioiina le mana'omia o le masini.
Fa'amatalaga fa'aaliga IC RF:
Ua mae'a su'esu'eina le masini ina ia fa'amalieina le mana'oga lautele IC RF. E mafai ona fa'aoga le masini i tulaga fa'aalia feavea'i e aunoa ma se fa'atapula'aina.
WARNING Please pay attention to electrical safety. Do not disassemble, crush or puncture the battery. This product is not a toy.
Fa'amatalaga Fa'apitoa
O le kamupani o lo'o nafa atoatoa mo le toe iloiloga ma le fa'amatalaga o lenei tusi lesona, fa'atino le filiga sili e fa'amautinoa lona sa'o.
Nevertheless, please note that any technical improvements to the product may not be separately notified, and that the images of the product, accessories, software interfaces, etc. in this manual serve solely as illustrations and references. Due to product updates and upgrades, theactual product may vary slightly from the images. Please refer to the physical product for accurate representations.
Pepa / Punaoa
 |
TECH F21 Mini Printer [pdf] Taiala mo Tagata Fa'aoga 2BSMY-F21, 2BSMY-F21, F21 Mini Printer, F21, Mini Printer, Printer |