ESP32-PICO-V3-02 IoT Development Module

“

Fa'amatalaga

• SoC: ESP32-PICO-V3-02 240 MHz lua-autu,
  Wi-Fi, 2 MB PSRAM, 8 MB Flash
• Sao Voltage: 5 V @ 500 mA
• Fetufa'aiga: Ituaiga-C x 1, GROVE (I2C + I/O +
  UART) x 1
• Mata LCD: 1.14 inisi, 135 x 240 Lanu TFT
  LCD, ST7789V2
• Microphone: SPM1423
• Fa'amau: Fa'amau fa'aoga x 3, LED lanu meamata x 1
  (e le mafai ona faʻapipiʻiina, faʻailoga moe), Red LED x 1 (pulea faʻasoa
  pine G19 ma IR LED emitter)
• RTC: BM8563
• Pisele: Pisele passive i luga o le laupapa
• IMU: MPU6886
• Antenna: 2.4 G 3D antenna
• Pini fafo: G0, G25/G26, G36, G32, G33
• ma'a: 200 mAh @ 3.7 V, totonu
• Tempera o Galuega:
• Fa'amau: Palasitika (PC)

Fa'atonuga o le Fa'aaogaina o Mea

Sauniuniga

1. Fa'asino i le M5Burner
   a'oa'oga e fa'amae'a ai le downloadina o meafaigaluega fa'amalama moli.
2. Download le firmware talafeagai mai le mea ua saunia
   so'oga.

Fa'atonuga ta'avale USB

Fa'apipi'i le ta'avale USB e mana'omia mo le masini.

Filifiliga o Uafu

Fa'afeso'ota'i le masini i le komepiuta e ala i se uaea USB. Ina ua uma le avetaavale
faʻapipiʻi, filifili le pusa masini talafeagai i M5Burner.

Mu

Kiliki i luga o le "Burn" e amata ai le faagasologa o le moli.

FAQ

Q1: Aisea e lanu uliuli ai la'u M5StickC Plus2/e le ta'a?

Fofo: Fa'aaoga le M5Burner e moli ai le ofisa
Faleoloa Firmware.

Q2: Aisea e na o le 3 itula e galue ai? Aisea e totogi ai i
100% i le 1 minute ma tape pe a aveese le tau
uaea?

Fofo: Toe fa'afo'i i tua le firmware aloaia pei
fa'aaoga firmware e le'o aloaia e mafai ona fa'aleaogaina le fa'amaonia ma mafua'aga
le mautu.

“`

M5StickC Plus2 Ta'iala Fa'atino
Faleoloa Firmware
Pe a feagai le masini ma faʻafitauli faʻagaioia, e mafai ona e taumafai e toe faʻamalama le firmware falegaosimea e siaki pe i ai se mea faʻaletonu meafaigaluega. Va'ai ile a'oa'oga lea. Fa'aoga le M5Burner firmware flashing tool e moli le firmware falegaosimea i luga o le masini.

FAQ
Q1: Aisea e lanu uliuli ai la'u M5StickC Plus2/e le ta'a?
Fofo: M5Burner Mu faʻaulu aloaia Faleoloa Firmware"M5StickCPlus2 UserDemo"

Q2: Aisea e galue ai na o le 3 itula? Aisea e 100% totogi ai i le 1 minute, aveese le uaea faʻapipiʻi o le a tape?

Fofo: “Bruce mo StickC plus2″Ose firmware e le'o aloaia. O le emoina o le firmware e le aloaia e mafai ona fa'aleaogaina ai lau saisai, mafua ai le le mautu, ma fa'aalia lau masini i tulaga lamatia saogalemu. Fa'agasolo ma le fa'aeteete. Fa'amolemole mu i tua le firmware aloaia.

1. Sauniuniga
o Va'ai i le M5Burner a'oa'oga e fa'auma ai le downloadina o meafaigaluega fa'amalama fa'amalama, ona va'ai lea i le ata o lo'o i lalo e la'u mai ai le firmware talafeagai.
Fa'asolo so'oga: https://docs.m5stack.com/en/uiflow/m5burner/intro
2. Fa'atonuga ta'avale USB
Fautuaga Fa'apipi'i Aveta'avale Kiliki le so'otaga i lalo e la'u mai ai le aveta'avale e fetaui ma lau faiga fa'aoga. O le pusa avetaʻavale mo le CP34X (mo le CH9102 version) e mafai ona sii mai ma faʻapipiʻi e ala i le filifilia o le afifi faʻapipiʻi e fetaui ma lau faiga faʻaogaina. Afai e te feagai ma faʻafitauli i le downloadina o polokalama (e pei o le taimi faʻagata poʻo le "Ua le mafai ona tusitusi e faʻatatau i le RAM" mea sese), taumafai e toe faʻapipiʻi le avetaavale masini. CH9102_VCP_SER_Windows https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/drivers/CH9102_VCP_SER_Windows.exe CH9102_VCP_SER_MacOS v1.7 https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/drivers/CH9102_VCP_MacOS_v1.7.zip Port Selection on MacOS On MacOS, atonu e lua avanoa avanoa. Pe a faʻaaogaina, faʻamolemole filifili le taulaga e taʻua wchmodem.

3. Filifiliga Taulaga
Fa'afeso'ota'i le masini i le komepiuta e ala i se uaea USB. A maeʻa le faʻapipiʻiina o avetaʻavale, e mafai ona e filifilia le pusa masini talafeagai i M5Burner.
4. Mu
Kiliki "Mu" e amata ai le faagasologa emo.

StickC-Plus2
SKU:K016-P2
1/13 | Taimi Fa'afou: 2025-07-31

Fa'amatalaga
O le StickC-Plus2 o le fa'asologa o le StickC-Plus. O loʻo faʻamalosia e le ESP32-PICO-V3-02 chip, e maua ai le fesoʻotaʻiga Wi-Fi. I totonu o lona tino faʻapipiʻi, e tuʻufaʻatasia ai le tele o punaoa o meafaigaluega, e aofia ai le IR emitter, RTC, microphone, LED, IMU, buttons, buzzer, ma isi mea. O loʻo faʻaalia ai se faʻaaliga TFT 1.14-inisi e faʻataʻitaʻiina e le ST7789V2 faʻatasi ai ma se iugafono o le 135 x 240. Ua faʻateleina le malosi o le maa i le 200 mAh, ma o le faʻaoga e fetaui lelei ma le HAT ma le Unit series modules. O lenei mea faigaluega faʻalelei ma faʻapitoa e mafai ona faʻaosoina ai le fatufatuga e le gata. O le StickC-Plus2 e fesoasoani ia te oe e fausia vave faʻataʻitaʻiga oloa IoT ma faʻafaigofieina le faagasologa atoa o le atinaʻe. E oo lava i tagata amata e fou i polokalame e mafai ona fatuina ni mea manaia ma faʻaaogaina i le olaga moni.
A'oa'oga
UIFlow
O lenei aʻoaʻoga o le a faʻaalia ai pe faʻafefea ona pulea le masini StickC-Plus2 e ala i le UIFlow graphical programming platform.
UiFlow2
O lenei aʻoaʻoga o le a faʻaalia ai pe faʻafefea ona pulea le masini StickC-Plus2 e ala i le UiFlow2 graphical programming platform.
Arduino IDE
O lenei aʻoaʻoga o le a faʻaalia ai pe faʻapefea ona faʻapipiʻi ma pulea le masini StickC-Plus2 e faʻaaoga ai le Arduino IDE.
2/13 | Taimi Fa'afou: 2025-07-31

Manatua
Ua Le Iloa le Taulaga A fa'aaoga le C-to-C cable, afai e le mafai ona iloa le uafu, fa'amolemole fai le fa'agaioiga o le fa'aogaina o le eletise: motusia le StickC-Plus2, tape (oomi umi le ki o le eletise se'ia o'o i luga le moli lanumeamata), ona toe fa'afeso'ota'i le USB cable e fa'aola.
Vaega
Fa'avae i luga ole ESP32-PICO-V3-02 fa'atasi ma le Wi-Fi lagolago Fausia 3-axis accelerometer ma 3-axis gyroscope Integrated IR emitter Fausia RTC Integrated microphone Fa'aoga fa'aoga, 1.14-inisi LCD, mana/toe fa'amau 200 mAh Li-ion maa Fa'alautelega Feso'ota'i Tu'ufa'atasiga Fa'asao fa'atasi & pa'u fa'apipi'i Fa'atasiga Fa'asao fa'atasi & fa'apipi'i.
UiFlow1 UiFlow2 Arduino IDE ESP-IDF PlatformIO
E aofia ai
1 x StickC-Plus2
Talosaga
Masini fa'aogaina IoT fa'atonu STEM a'oa'oga Poloketi DIY Masini atamai-fale
3/13 | Taimi Fa'afou: 2025-07-31

Fa'amatalaga

Fa'amatalaga

Parameter

SoC

ESP32-PICO-V3-02 240 MHz lua-autu, Wi-Fi, 2 MB PSRAM, 8 MB Flash

Sao Voltage

5 V @ 500 mA

Fa'afeso'ota'i

Ituaiga-C x 1, GROVE (I2C + I/O + UART) x 1

Mata LCD

1.14 inisi, 135 x 240 Lanu TFT LCD, ST7789V2

Microphone

SPM1423

Fa'amau

Fa'amau fa'aoga x 3

LED lanu meamata x 1 (e le mafai ona fa'apolokalameina, fa'ailoga moe) LED Mumu x 1 (fa'asoa fa'amau fa'amau G19 ma IR LED
emitter)

RTC

BM8563

Pisele

Pisele passive i luga o le laupapa

IMU

MPU6886

Antenna

2.4 G 3D antenna

Pini fafo

G0, G25/G26, G36, G32, G33

Ma'a

200 mAh @ 3.7 V, totonu

Galulue Temp

0 ~ 40 °C

Puipuiga

Palasitika (PC)

Tele o oloa

48.0 x 24.0 x 13.5mm

Oloa mamafa

16.7 g

Tele o le afifi

104.4 x 65.0 x 18.0mm

Mamafa Matua

26.3 g

Fa'atonuga o Galuega

4/13 | Taimi Fa'afou: 2025-07-31

Malosi / Pepe
Malosiaga: Taomi le "PUTTON C" mo le sili atu i le 2 sekone, pe ala i luga e ala i le RTC IRQ faailo. A maeʻa ona faʻaalia le faʻailoga fafagu, e tatau i le polokalame ona seti le pine HOLD (G4) i le maualuga (1) e faʻaauau ai le malosi, a leai o le a toe tapuni le masini. Malosi-ta'i: A aunoa ma le mana USB fafo, lolomi le "PUTTON C" mo le sili atu i le 6 sekone, pe seti HOLD (GPIO4)=0 i le polokalama e tape. A'o feso'ota'i le USB, oomiina le "BUTTON C" mo le sili atu i le 6 sekone o le a tape ai le lau ma ulufale i le moe (e le'o le pa'u atoa).
Matematika
StickC-Plus2 Schematics PDF
5/13 | Taimi Fa'afou: 2025-07-31

6/13 | Taimi Fa'afou: 2025-07-31

PinMap

Uila mumu & IR Emitter | Faamau A | Faamau B | Pisele

ESP32-PICO-V3-02 IR Emitter & Uila Mumu
Fa'amau A Fa'amau B Fa'amau C Fa'a'au'au Pa'u

GPIO19 IR emitter & Red LED pine

GPIO37 faamau A

GPIO39 faamau B

GPIO35 faamau C

GPIO2 Pusa

Lanu TFT Fa'aaliga
Avetaavale IC: ST7789V2 I'uga: 135 x 240

7/13 | Taimi Fa'afou: 2025-07-31

ESP32-PICO-V3-02 TFT Fa'aaliga

G15 TFT_MOSI

G13 TFT_CLK

G14 TFT_DC

G12 TFT_RST

G5 TFT_CS

G27 TFT_BL

Microphone MIC (SPM1423)

ESP32-PICO-V3-02

G0

MIC SPM1423

CLK

G34 FAAMATALAGA

6-Axis IMU (MPU6886) & RTC BM8563

ESP32-PICO-V3-02 IMU MPU6886 BM8563 IR Emitter Red LED

G22 SCL SCL

G21 SDA SDA

G19
TX TX

HY2.0-4P
HY2.0-4P PORT. CUSTOM

GND uliuli

Lanu mumu

Lanu samasama

Lanu pa'epa'e

5V

G32

G33

Fa'ata'ita'iga Tele

8/13 | Taimi Fa'afou: 2025-07-31

Pepa fa'amaumauga
ESP32-PICO-V3-02 ST7789V2 BM8563 MPU6886 SPM1423
Softwares
Arduino
StickC-Plus2 Arduino Amata vave StickC-Plus2 Faletusi StickC-Plus2 Falefaigaluega Su'ega Firmware
UiFlow1
StickC-Plus2 UiFlow1 Amata vave
UiFlow2

9/13 | Taimi Fa'afou: 2025-07-31

StickC-Plus2 UiFlow2 Amata vave
PlatformIO
[[eennvv::mm55ssttaacckk–ssttiicckkcc–pplluuss22]] ppllaattffoorrmm == eesspprreessssiiff3322@@66..77..00 bbooaarrdd == mm55ssttiicckkk–cc ffrraamnouokk == mm55ssttiicckk–cc uuppllooaadd__ssppeeeedd == 11550000000000 mmoonniittoorr__ssppeeeedd == 111155220000 bbuuiilldd__ffllaaggss ==
–DDBBOOAARRDD__HHAASS__PPSSRRAAMM –mmffiixx–eesspp3322–ppssrraamm–ccaacchhee–iissssuuee –DDCCOORREE__DDEEBBUUGG__LLEEVVEELL==55 lliibb__ddeeppss == MM55UUnniiffiieedd==hhttttppss::////ggiitthhuubb..ccoomm//mm55ssttaacckk//MM55UUnniiffiieedd

Avetaavale USB
Kiliki so'oga o lo'o i lalo e la'u mai ai le aveta'avale e fetaui ma lau faiga fa'aoga. O le afifi o loʻo i ai avetaʻavale CP34X (mo CH9102). A maeʻa ona aveese le faʻamaumauga, taʻavale le mea faʻapipiʻi e fetaui ma lau OS bit-depth. Afai e te feagai ma faʻafitauli e pei ole taimi faʻagata poʻo le "Ua le mafai ona tusi e faʻatatau i le RAM" i le taimi o le siiina mai, faʻamolemole taumafai e toe faʻapipiʻi le avetaavale.

Igoa Avetaavale CH9102_VCP_SER_Windows CH9102_VCP_SER_MacOS v1.7

Lagolago Chip CH9102 CH9102

La'u download La'u download

MacOS Port Selection E lua laina fa'asologa e ono aliali mai ile macOS. Fa'amolemole filifili le taulaga ua ta'ua wchmodem.

Easyloader
EasyLoader o se polokalame moli moli e sau ma se faʻataʻitaʻiga firmware. E ala i le mulimuli i nai laasaga faigofie, e mafai ona e moliina i le pule mo le faʻamaonia vave o galuega.

Easyloader FactoryTest mo Windows

La'u download

Fa'aaliga /

Isi

10/13 | Taimi Fa'afou: 2025-07-31

StickC-Plus2 Toe Fa'afo'isia Fale Fa'atonu Firmware Guide
Vitio
StickC-Plus2 Fa'amatalaga Folasaga StackC Plus2 .mp4
Suiga Version

Aso Fa'ailoa /
2021-12
2023-12

Suia Faamatalaga
Fa'atagaga muamua Fa'aopoopo le moe ma le fafagu, fa'afouga fa'afouga i le v1.1 Ave'esea PMIC AXP192, MCU suia mai le ESP32-PICO-D4 i le ESP32-PICO-V3-02,
ese'ese le mana-on/off method, version v2

Manatua //

Faatusatusaga o oloa

Eseesega o Meafaigaluega

11/13 | Taimi Fa'afou: 2025-07-31

Igoa Oloa

Malosiaga SoC
Pulega

StickC-Plus ESP32-PICO-D4

AXP192

ESP32-PICO-

StickC-Plus2

/

V3-02

Malosiaga ma'a

Manatu

USB-UART Chip

Lanu

120mAh

520 KB SRAM + 4 MB Flash

CH522

Toe lanu moli

200mAh

2 MB PSRAM + 8 MB Flash

CH9102

Lanu moli

Eseesega Pin

Oloa IR
Igoa
M5STICKC G9
PLUS
M5STICKC G19
PLUS2

Ma'a

POTO C

LED

TFT

PUTTON A PUTINI B

TUMAU

Voltage

(WAE)

Su'e

MOSI (G15)

CLK (G13)

G10

DC (G23)

G37

RST (G18)

G39 masani
faamau

/

E ala i le AXP192

CS (G5)

MOSI (G15)

CLK (G13)

G19

DC (G14)

G37

G39

G35

G4

G38

RST (G12)

CS (G5)

Malosiaga Ki/Tape Eseesega

12/13 | Taimi Fa'afou: 2025-07-31

Igoa Oloa

Malosiaga

Pepe Malosi

StickC-Plus

Oomi le faamau toe setiina (POTO C) mo le itiiti ifo i le 2 s

Oomi le faamau toe setiina (POTO C) mo le itiiti ifo i le 6 s

Oomi le “BUTTON C” mo le sili atu i le 2 s, po’o le aunoa ma le USB power, oomi le “BUTTON C” mo le silia ma le 6 s,

StickCPlus2

ala ile RTC IRQ. A uma ona ala i luga, seti

pe seti HOLD (GPIO4)=0 i le polokalame e tape. Faatasi ai ma

HOLD (G4)=1 i le polokalame e teu

USB feso'ota'i, oomi le "PUTTON C" mo le sili atu i le 6 s

malosi, a leai o le a tapuni le masini o le a tape le lau ma ulufale i le moe, ae le o se malosi atoatoa-

toe i lalo.

ese.

Talu ai ona o le StickC-Plus2 e aveese le PMIC AXP192, o le power-on/off method e ese mai i lomiga muamua. E pei ona taʻua i le amataga o lenei pepa, o le faʻagaioiga e tutusa lava, ae o faletusi lagolago o le a eseese. Wi-Fi ma IR faʻailoga malosi ua faʻaleleia uma pe a faʻatusatusa i le faʻataʻitaʻiga muamua.

13/13 | Taimi Fa'afou: 2025-07-31

Pepa / Punaoa

M5STACK ESP32-PICO-V3-02 IoT Development Module [pdf] Taiala mo Tagata Fa'aoga ESP32-PICO-V3-02 IoT Development Module, ESP32-PICO-V3-02, IoT Development Module, Atinaʻe Atinaʻe, Module

Fa'asinomaga

• Tusi Taiala