DeepCool AK400 CPU Cooler ma se Fa'aaliga Tulaga
Fa'amatalaga
- Fa'ata'ita'iga: DeepCool AK400 Digital CPU Cooler
- Socket Compatibility
- Intel: LGA 1150/1151/1155/1156/1200/1700
- AMD: AM4/AM5
- Cooling Capacity (TDP): E oo atu i le 220W
- Paipa vevela: 4 x 6mm direct-touch copper heat pipes
- Faaili:
- Tele: 120mm x 120mm x 25mm
- Ituaiga: Fluid Dynamic Bearing (FDB)
- Saosaoa: 500–1850 RPM ±10%
- Fa'afefe o le ea: Up to 68.99 CFM
- Tulaga Pio: ≤28 dB(A)
- Feso'ota'i: 4-pin PWM
- Faatulagaina Voltage: 12V DC
- Fa'aaogāga Malosiaga: 1.44W
- Uila moli: Addressable RGB
- Feso'ota'i: 3-pin (+5V-D-G) and 9-pin USB 2.0
- Fua:
- Aotelega: 126mm (L) x 97mm (W) x 156mm (L)
- Su'e vevela: 120mm (L) x 60mm (W) x 152mm (L)
- mamafa: E tusa ma le 695g
Fonotaga & Fa'atonu Fa'atonu
Meafaigaluega Manaomia
- Phillips sikulamu
- Pasi vevela (pe a le fa'aoga muamua)
- Cleaning cloth or isopropyl alcohol (for CPU surface prep)
Step 1: Prepare the Motherboard
- Power off your PC and unplug all cables.
- Remove the existing CPU cooler if applicable.
- Clean the CPU surface using a lint-free cloth and isopropyl alcohol to remove old thermal paste.
Step 2: Install the Backplate
- Place the provided motherboard backplate on the rear side of the motherboard.
- Align the holes of the backplate with the CPU socket mounting holes.
Step 3: Attach Standoffs
- Insert the standoffs through the motherboard aligned with the backplate.
- Tighten the standoffs gently; they will hold the cooler firmly in place.
Step 4: Apply Thermal Paste
- Fa'aaogā sina fasi pi'i la'ititi ole pa'u vevela ile ogatotonu ole PPU.
- If your AK400 cooler comes with pre-applied thermal paste, skip this step.
Step 5: Mount the Cooler
- Align the AK400 cooler base over the CPU, ensuring the mounting holes match the standoffs.
- Carefully place the cooler onto the CPU and press gently.
- Secure the cooler using the provided screws in a diagonal pattern to ensure even pressure.
Step 6: Attach the Fan
- Attach the fan to the heatsink using the included clips or screws.
- Ensure the airflow direction is correct (usually indicated by arrows on the fan).
Step 7: Connect the Fan & Display
- Plug the fan power cable into the CPU_FAN header on the motherboard.
- Connect the status display cable to the appropriate motherboard or power header as specified in the manual.
Laasaga 8: Siaki Mulimuli
- Double-check that all screws are tight and the cooler is secure.
- Ensure cables are connected and not obstructing the fan.
- Close the PC case and reconnect the power.
Step 9: Power On & Monitor
- Turn on your PC and check the status display for proper operation.
- Monitor CPU temperatures in BIOS or using software to ensure proper cooling performance.
Fautuaga
- Handle the cooler carefully; the display panel can be fragile.
- Do not overtighten screws; excessive pressure can damage the CPU or motherboard.
- Make sure airflow is not blocked by other components.
- After installing the product, turn on the PC, download and install the software, and the product-function control has been enabled on, webnofoaga.www.deepcool.com/downloadpage/
- Faiga fa'aoga mana'oga: Pupuni 10/Pupuni 11
FAQs
How do I install the AK400 Digital?
The cooler comes with an all-metal mounting bracket designed for easy installation on various platforms. Detailed installation instructions are provided in the user manual.
E mafai ona ou fa'avasegaina le moli RGB?
Yes, the AK400 Digital features addressable RGB lighting that can be customized using compatible software or motherboard RGB headers.
Pepa / Punaoa
 |
DeepCool AK400 CPU Cooler ma se Fa'aaliga Tulaga [pdf] Tusi Taiala AK400 CPU Cooler ma se Fa'aaliga Tulaga, AK400, CPU Cooler ma se Fa'aaliga Tulaga, Fa'aaliga Tulaga, Fa'aaliga |