Tusitaiala mo le Fa'aaogāina o le Nofoa Ofisa Ergonomic Hbada P2

Fa'amatalaga Taua mo le Saogalemu

WARNING: This product contains a gas lift mechanism. Always follow the instructions for proper use and assembly to prevent injury. Be cautious of sharp edges during assembly. Do not exceed the maximum weight capacity of 264 lbs. Keep away from heat sources and open flames. Always use the chair on a stable surface.

• Ia fa'amautinoa o fa'amau uma fa'amau ma fa'amau a'o le'i fa'aogaina.
• Aua le tu i luga o le nofoa.
• Avoid placing heavy objects on the chair that could cause instability.
• Regularly inspect the chair for loose parts or damage.

O mea o lo'o i totonu

Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer service.

• Hbada P2 Ergonomic Office Chair components
• Assembly hardware kit
• Welcome guide (this manual)

Image: Fully assembled Hbada P2 Office Chair in a home office setting.

Faatonuga Fonotaga

Follow these steps carefully to assemble your Hbada P2 Office Chair. It is recommended to assemble the chair on a soft, clean surface to prevent damage.

1. Tatala Vaega: Carefully remove all parts from the packaging and lay them out.
2. Fa'apipi'i Casters i le Fa'avae: Fa'aofi uili i totonu o pu i le pito i lalo o vae ta'itasi o le fa'avae o le nofoa. Oomi ma le malosi se'ia kiliki i le mea sa'o.
3. Tu'u Si'i Kesi: Tuu le tane si'i kesi i totonu o le pu ogatotonu o le faavae o le nofoa.
4. Fa'apotopoto le Auala e Fa'atulaga ai le Nofoa: Attach the seat mechanism to the underside of the seat cushion using the provided screws. Ensure the front of the mechanism faces the front of the seat.
5. Fa'apipi'i Armrests: Fa'amau fa'amau lima i le aluga o le nofoa e fa'aaoga ai sikuliu ua atofaina.
6. Fa'afeso'ota'i le tua o le nofoa i le nofoa: Attach the backrest to the seat assembly.
7. Mount Seat Assembly to Gas Lift: Tuu ma le faaeteete le nofoa ua uma ona tuufaatasia ma le tua o le nofoa i luga o le tane si'i kesi.
8. Fa'apipi'i Headrest: Slide the headrest into the slots at the top of the backrest.
9. Siaki Mulimuli: Verify all connections are secure and the chair functions correctly.

Image: Diagram illustrating the key dimensions of the Hbada P2 Office Chair.

Fa'atonuga o Galuega

Your Hbada P2 Office Chair offers several adjustable features to customize your seating experience.

1. Fetuunaiga Maualuluga Nofo

To adjust the seat height, locate the lever on the right side beneath the seat. Pull the lever up while seated to lower the seat, or pull it up while standing to raise the seat. Release the lever at the desired height.

2. Galuega Fa'ata'oto

The chair can recline and lock into three positions: 90° (upright), 110° (relaxed), and 135° (nap). To recline, pull the lever on the left side beneath the seat. Lean back to your desired angle and push the lever down to lock it. To return to an upright position, pull the lever up and lean forward.

Image: Illustration showing the 90°, 110°, and 135° reclining angles of the chair.

3. 3D Adjustable Lumbar Support

The lumbar support can be adjusted in height, depth, and width to conform to your lower back. Locate the adjustment controls on the backrest. Adjust the support until it provides optimal comfort and alignment for your spine.

• Su'ega Maualuluga: Push the lumbar support up or down.
• Su'ega loloto: Rotate the knob (if present) or push the support forward/backward.
• Side-to-Side Motion: The lumbar support offers 10° side-to-side motion for dynamic support.

Ata: Auiliili view of the 3D adjustable lumbar support, showing height, depth, and side-to-side adjustments.

4. Ulu e mafai ona fetu'una'i i le 2D

The headrest can be adjusted in height and swivel angle. Grasp the headrest and move it up or down to your preferred height. It also swivels 40° to provide neck support.

Image: Close-up of the 2D adjustable headrest, highlighting its height and swivel capabilities.

5. Fetuunaiga o le Nofoaga e Fa'atumauina ai Lima

The armrests are height-adjustable with a 7.5 cm (approximately 3 inches) range. Locate the button or lever on the side of each armrest. Press it and move the armrest up or down to your desired height. Release the button/lever to lock it in place.

Ata: View of the armrest, indicating the mechanism for height adjustment.

Tausiga

Proper maintenance ensures the longevity and optimal performance of your Hbada P2 Office Chair.

• Fa'amamaina:
  • For mesh and fabric surfaces, use a soft cloth dampened with mild soap and water. Avoid harsh chemicals.
  • For plastic and metal parts, wipe with a clean, damp ie.
  • Do not saturate the chair with water.
• Asiasiga: Ia siaki i lea taimi ma lea taimi sikulima ma poloti uma e faamautinoa ai ua mau lelei. Toe fa'amau pe a mana'omia.
• Fa'amea: Keep casters clean from hair and debris to ensure smooth movement.
• Si'i Kesi: Do not attempt to disassemble or repair the gas lift cylinder yourself. Contact customer service if it malfunctions.

Image: Diagram illustrating the layered construction of the elastic foam seat cushion.

Fa'afitauli

If you encounter any issues with your Hbada P2 Office Chair, refer to the following common problems and solutions:

Fa'amatalaga

Fa'amaonia ma Tagata Fa'atau Lagolago

Your Hbada P2 Ergonomic Office Chair comes with a comprehensive warranty and dedicated customer support.

• Fa'amaonia: This product is covered by a 3-year warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use.
• Toe fo'i: A 30-day free return policy is available.
• Price Match: A 15-day price match guarantee is offered.
• Auaunaga i tagata: For any questions, assistance with assembly, troubleshooting, or warranty claims, please contact Hbada customer service. Refer to the welcome guide or the official Hbada web'upega tafaʻilagi mo faʻamatalaga auiliili.