Tusitaiala mo le Fa'aoga o le SCULPFUN S30 Laser Engraver

Folasaga

This manual provides essential information for the safe and effective operation of your SCULPFUN S30 Laser Engraver. Please read it thoroughly before setup and use to ensure optimal performance and safety.

Figure 1: SCULPFUN S30 Laser Engraver with various engraved samples including a wallet, business cards, and a wooden insect model.

Fa'amatalaga Saogalemu

Operating a laser engraver involves potential hazards. Adhere strictly to the following safety guidelines:

• Puipuia Mata: Always wear appropriate laser safety goggles (Laser Class IV) when the laser is active. Never look directly at the laser beam.
• Savili: Operate the engraver in a well-ventilated area to dissipate fumes and smoke produced during engraving and cutting.
• Tulaga Afi: Laser engraving can ignite flammable materials. Keep a fire extinguisher nearby and never leave the machine unattended during operation. The S30 includes an emergency power switch for quick shutdown.
• Mea Fa'atatauga: Only engrave or cut materials safe for laser processing. Avoid PVC, vinyl, and other materials that produce toxic fumes.
• Puipuiga luga ole Galuega: Use the provided A4 size steel mat or a similar fire-resistant surface to protect your workbench from laser damage.
• Tamaiti ma Fagafao: Taofi tamaiti ma fagafao mai le nofoaga e fai ai taotoga.
• Saogalemu Faaeletise: Ensure the power supply is correctly connected and grounded. Do not operate with wet hands or in damp tulaga.

Oloa Fa'ailoga

The SCULPFUN S30 Laser Engraver incorporates advanced features for precision and efficiency:

• Automatic Air Assist: Equipped with an automatically controlled air pump. This feature intelligently manages air-assist via the M8 button in LightBurn software, directing high-pressure airflow through the metal nozzle. This significantly increases cutting speed (over 5 times faster) and improves cutting performance by clearing debris and reducing charring.
• Ultra-fine Laser Modeling Technology: Features a precise 0.005mm industrial linear guide and a laser focus of 0.06x0.06mm. This results in higher energy density, stronger cutting penetration, and enhanced engraving accuracy, eliminating wave lines in engravings.
• Fuafuaga saogalemu ma mautu: Constructed from high-strength aluminum alloy, capable of supporting up to 50kg. Includes an emergency power switch for immediate shutdown and an A4 size steel mat to protect surfaces.
• Expandable Engraving Area: The original working area is approximately 400x400mm. It can be expanded to 935x400mm with a Y-axis extension kit, or further to 935x905mm with an XY-axis extension kit (sold separately), accommodating larger projects.
• Feso'ota'iga lautele: The latest 32-bit motherboard supports automatic Air-Assist control. Features Bluetooth and SD card offline printing. Compatible with LightBurn (with M8 air support), LaserGRBL, Benbox, GrblController, and LiteFire. Supports Windows and MAC systems. File formats include NC, BMP, JPG, PNG, DXF, and other image formats.
• Fa'alava leisa: Class IV laser with 5000mW output power.

Figure 2: Illustration of the S30's high-density, sharp laser beam and 5W powerful laser beam shaping technology.

Figure 3: Close-up of the S30's built-in high-pressure air assist nozzle, demonstrating airflow.

Figure 4: Diagram showing the automatic controlled air assist feature and its integration with LightBurn software (M8 Air Assist Switch).

Figure 5: Comparison illustrating the benefits of automatic air assist over traditional manual air pumps for clean edges and efficient cutting.

Figure 6: Visual representation of the high precision 0.005mm industrial grade linear rail, highlighting the improved engraving accuracy without wavy lines.

Seti Taiala

Follow these steps to set up your SCULPFUN S30 Laser Engraver:

1. Tatalaina: Carefully remove all components from the packaging. Verify all parts are present against the packing list.
2. Fonotaga: Assemble the frame according to the included assembly instructions. Ensure all screws are tightened securely.
3. Fa'apipi'iina o le Module Laser: Mount the laser module onto the gantry. Connect the laser module cable to the main control board.
4. So'oga pamu ea: Connect the air pump to the designated port on the laser module and the main control board.
5. Power and USB Connection: Connect the power adapter to the engraver and a power outlet. Connect the engraver to your computer via the provided USB cable.
6. Fa'apipi'i polokalame: Install the recommended software (e.g., LightBurn, LaserGRBL) on your computer. Drivers may be required.
7. Fa'avasegaina muamua: Follow the software's instructions for initial calibration, including setting the working area and focusing the laser.

Ata 7: Ua Ovaview of the SCULPFUN S30 components, including the laser module, air pump, and frame parts.

Fa'atonuga o Galuega

This section outlines the basic steps for operating your laser engraver:

1. Saunia Mea: Place the material to be engraved or cut on the work surface, ensuring it is flat and secure. Use the steel mat underneath.
2. Seti polokalame: Open your chosen laser control software (e.g., LightBurn). Import or create your design.
3. Fa'atonuga: Adjust laser power, speed, and passes based on the material and desired effect. Refer to material test guides for optimal settings.
4. Focus the Laser: Manually or automatically adjust the laser focus for optimal performance. The S30 features a fixed-focus laser, simplifying this step.
5. Enable Air Assist: For cutting operations, ensure the automatic air assist is enabled in the software (M8 command in LightBurn). For engraving, it may be turned off for finer details.
6. Amata Galuega: Initiate the engraving or cutting process from the software. Monitor the process closely.
7. Fa'ai'uga: Once the process is complete, wait for the laser to stop and fumes to clear before removing the material.

Tausiga

Regular maintenance ensures the longevity and performance of your engraver:

• Fa'amama le Lens: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain optimal laser focus and power. The S30 features a replaceable lens for easy maintenance.
• Clean the Work Area: Remove debris and dust from the honeycomb workbed and surrounding areas after each use.
• Lubricate Rails: Apply a small amount of lubricant to the linear guide rails periodically to ensure smooth movement of the laser module.
• Siaki So'oga: Regularly inspect all cable connections for looseness or damage.

Fa'afitauli

Fa'afitauli masani ma a latou fofo:

Fa'amatalaga

• Fa'ata'ita'iga: xxl-S30 5W
• Malosiaga Fa'aoso leisa: 5W
• Nofoaga Tusia: 400mm x 400mm (Expandable to 935mm x 400mm or 935mm x 905mm with extension kits)
• Taulai leisa: 0.06mm x 0.06mm
• Linear Guide Accuracy: 0.005mm
• Motherboard: Latest 32-bit with Air-Assist automatic control
• Feso'ota'i: USB, Bluetooth, SD Card (offline printing)
• Polokalame Fesoasoani: LightBurn, LaserGRBL, Benbox, GrblController, LiteFire
• Faiga Fa'agaioiga Lagolago: Pupuni, MAC
• Lagolagoina File Fa'atulagaga: NC, BMP, JPG, PNG, DXF, etc.
• Fua o Mea: 18.11 x 18.11 x 6.69 inisi
• Mea mamafa: 14.17 pauna
• Tufuga: SULPFUN
• Atunuu na afua mai ai: Saina
• Aso Muamua Maua: Iulai 9, 2024

Fa'amaonia ma Lagolago

For warranty information and technical support, please refer to the official SCULPFUN webnofoaga pe fa'afeso'ota'i lau fa'atau. Taofi lau lisiti fa'atau e fai ma fa'amaoniga o le fa'atauga mo tagi fa'amaonia.

SCULPFUN Official Store: Visit the SCULPFUN Store on Amazon