Tusitaiala mo le Lomitusi o le Xprinter XP-370B Thermal Barcode Sticker

1. Folasaga

This manual provides detailed instructions for the installation, operation, and maintenance of your Xprinter XP-370B Thermal Barcode Sticker Printer. Please read this manual thoroughly before using the printer to ensure proper functionality and to prevent damage.

2. Fa'amatalaga Saogalemu

• Fa'afeso'ota'i pea le lomitusi i se palaka eletise ua fa'a'ele'eleina.
• Do not expose the printer to water or high humidity.
• Aloese mai le tu'uina o le lomitusi i le susulu sa'o o le la po'o latalata i puna vevela.
• Use only Xprinter approved accessories and power adapters.
• Taofi le lomitusi mai tamaiti.
• Do not attempt to disassemble or repair the printer yourself. Contact qualified service personnel for assistance.

3. Mea i totonu o le afifi

Fa'amautinoa o lo'o iai mea uma i totonu o le afifi:

• Xprinter XP-370B Thermal Barcode Sticker Printer
• Fetuunaiga Malosi
• Uaea USB
• Ta'iala Amata vave (pe a iai)

4. Oloa Ua Ovaview

The Xprinter XP-370B is a compact and efficient thermal printer designed for barcode and sticker printing. It features high-speed printing capabilities and supports various connectivity options.

Ata 4.1: Luma-taumatau view of the Xprinter XP-370B Thermal Barcode Sticker Printer.

Ata 4.2: Itu view illustrating the power button and top cover key for accessing the media compartment.

5. Seti

5.1 Ta'ese'ese ma Tu'u

• Aveese ma le faaeteete le lomitusi mai lona afifiina.
• Place the printer on a stable, flat surface with adequate ventilation.
• Ensure there is enough space around the printer for cable connections and media loading.

5.2 Feso'ota'i le Lomitusi

1. Connect the power adapter to the printer's power port and then plug it into a power outlet.
2. Connect the printer to your computer using the provided USB cable. The printer also supports Serial, Ethernet, and Bluetooth connectivity options depending on the model.
3. Turn on the printer using the power button located on the side (refer to Figure 4.2).

5.3 Loading Print Media

1. Press the top cover key (refer to Figure 4.2) to open the printer's top cover.
2. Place the roll of thermal labels into the media compartment. The maximum label diameter supported is 100mm.
3. Adjust the paper guide to fit the width of your labels securely.
4. Pull a small length of labels past the print head.
5. Close the top cover until it clicks into place.

Figure 5.3: The printer demonstrating a label being fed out after printing.

5.4 Fa'apipi'i Aveta'avale

• For Windows systems, insert the driver CD (if provided) or download the latest drivers from the official Xprinter webnofoaga. Mulimuli i fa'atonuga i luga ole lau mo fa'apipi'i.
• For Android and iOS devices, download the appropriate printing application from your device's app store.

6. Fa'atonuga o Galuega

6.1 Lomitusi Fa'avae

1. Ensure the printer is powered on and connected to your device.
2. Open the document or application from which you wish to print.
3. Select the Xprinter XP-370B from your list of available printers.
4. Adjust print settings such as label size, orientation, and density as needed.
5. Initiate the print command. The printer will begin printing at speeds up to 152mm/s.

7. Tausiga

7.1 Fa'amama le Lomitusi

• Turn off and unplug the printer before cleaning.
• Fa'aaogā se ie mālūlū e leai se liu oampened with isopropyl alcohol to gently clean the print head.
• Clean the exterior of the printer with a soft, dry cloth.
• Aua ne'i fa'aogaina ni mea e fa'amama fa'amama po'o ni so'o.

8. Faʻafitauli

• Printer not responding: Check power connection, USB/Serial/Ethernet/Bluetooth connection, and ensure drivers are correctly installed.
• Le lelei o le lolomi: Clean the print head, ensure correct media type is used, and check print density settings.
• Siaki pepa: Open the top cover, carefully remove any jammed labels, and re-load the media correctly.
• Labels not feeding: Ensure labels are loaded correctly and the paper guide is adjusted properly. Check for any obstructions.

9. Fa'amatalaga

10. Fa'amaonia ma Lagolago

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Xprinter webnofoaga. Taofi lau lisiti fa'atau e fai ma fa'amaoniga o le fa'atauga mo tagi fa'amaonia.