1. Oloa Ua Ovaview
The LFF CO2 Detector Model LAQ962 is an advanced indoor air quality monitor designed to provide real-time measurements of carbon dioxide (CO2) concentration, ambient temperature, and relative humidity. Utilizing Non-Dispersive Infrared (NDIR) technology, this device ensures accurate data for effective environmental monitoring. It features a large, clear color display, customizable dual alarms, and a built-in rechargeable battery for portable use.
Vaega Autu:
- Multifunctional Monitoring: Measures CO2 concentration, temperature, and humidity.
- NDIR Technology: Ensures high accuracy for CO2 readings.
- Customizable Dual Alarms: Set specific CO2 thresholds for audible alerts.
- CO2 Concentration Indicator: Visual display of Normal, Warning, and Dangerous CO2 levels.
- Large Color Display: 4-inch LCD screen for easy readability.
- Ma'a e toe fa'aaogaina: Built-in 2000mAh battery for extended use.
- Malamalama i tua fetuutuunai: Three levels of brightness for optimal viewing.

2. Mea i totonu o le afifi
Fa'amolemole fa'amautinoa o lo'o iai mea uma ma o lo'o lelei pe a tatala le afifi:
- LFF CO2 Detector (Model LAQ962)
- Ituaiga-C Paʻu uaea
- Tusi Lesona a le Tagata (lenei pepa)
3. Seti ma Fa'aoga Muamua
3.1 Totogiina le Masini
Before first use, fully charge the LFF CO2 Detector. Connect the provided Type-C charging cable to the device's charging port and plug the other end into a standard USB power adapter (not included) or a computer USB port. The battery indicator on the display will show charging status.

3.2 Fa'aola i luga/Pepe
Press and hold the power button (location typically on the side or back) for a few seconds to turn the device on or off. The display will illuminate upon successful power-on.
4. Galuega
4.1 Fa'aali i lugaview
The large color display provides a comprehensive view of current air quality parameters:
- CO2 Concentration (PPM): Central large number, indicating parts per million.
- Tempera: Displayed in Fahrenheit or Celsius.
- Susū: Fa'aalia o se pasenetage.
- Taimi: Taimi nei.
- Tulaga Fa'alogo: Icons indicating active alarms.
- Fa'ailoga ma'a: Fa'aali atu le ola maa o totoe.

4.2 Understanding CO2 Levels
The device categorizes CO2 concentration into three stages, indicated by color changes on the display and corresponding icons:
- masani Stage: CO2 ≤ 800 ppm (Green indicator). Indicates good air quality.
- Warning Stage: CO2 801 - 1600 ppm (Yellow indicator). Suggests ventilation may be required.
- Dangerous Stage: CO2 > 1600 ppm (Red indicator). Indicates poor air quality; immediate ventilation is recommended.

4.3 Fa'atulagaina o Fa'ailoga
The LFF CO2 Detector features customizable dual alarms. When the measured CO2 level reaches your set high or low alarm threshold, an audible beep will sound, and the alarm icon will flash. Refer to the device's on-screen menu or specific buttons (usually labeled 'SET' or 'MODE') to adjust the CO2 alarm values.

4.4 Fetuunaiga o le moli tua
The device offers three levels of backlight brightness (100%, 50%, 0%) to suit different lighting conditions and conserve battery life. Use the designated button (often indicated by a light bulb icon) to cycle through the brightness settings.

4.5 Taimi ma Aso Fa'atulaga
To set the current time and date, navigate through the device's menu using the control buttons. Follow the on-screen prompts to adjust hours, minutes, and date. Consult the quick start guide or on-screen instructions for specific button sequences.
5. Tausiga
5.1 Fa'amamāina
To clean the device, gently wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water. Ensure the sensor vents are clear of dust and debris.
5.2 Tausiga maa
To maximize battery lifespan, avoid fully discharging the device frequently. For prolonged storage, charge the battery to approximately 50% and store in a cool, dry place. If using the device continuously, it is recommended to keep it plugged in to a power source.
6. Faʻafitauli
- Inaccurate CO2 Readings: If you suspect inaccurate readings, take the device outdoors for 10-15 minutes to allow it to recalibrate to ambient CO2 levels (typically around 400-450 ppm). Ensure the sensor vents are not obstructed.
- Puupuu le ola o le maa: Ensure the device is fully charged before use. Adjust the backlight brightness to a lower setting to conserve power. For continuous monitoring, keep the device connected to a power source via the Type-C cable.
- Ua le ola le masini: Check if the battery is charged. Connect the device to a power source and attempt to power it on again. If the issue persists, contact customer support.
- Ua le leo le Alu: Verify that the alarm thresholds are set correctly and that the alarm function is enabled in the device settings.
7. Fa'amatalaga
| Fa'aaliga | Fa'amatalaga |
|---|---|
| Fa'ailoga | LFF |
| Numera Fa'ata'ita'i | LAQ962 |
| Punavai Malosi | Battery Powered (5 Volts DC) |
| Ituaiga maa | 1 maa Lithium Ion (aofia ai) |
| Mea mamafa | 7.04 aunese |
| Fua o Mea | 2.99 x 1.42 x 3.78 inisi |
| Ituaiga atuatuvale | Fa'alogo |
| Ituaiga Sensori | Infrared e le fa'asalalauina (NDIR) |
| Fa'atatau o le vevela maualuga | 122 Tikeri Fahrenheit |
| Masini Fegalegaleai | Ituaiga-C uaea |
| Ituaiga Fa'amau | Fa'amau |

8. Fa'amaonia ma Lagolago
LFF is committed to providing quality products and customer satisfaction. If you encounter any issues or have questions regarding your LFF CO2 Detector, please do not hesitate to contact our customer service. We are dedicated to assisting you and ensuring your complete satisfaction.
For support, please refer to the contact information provided with your purchase or visit the official LFF webnofoaga.





