Radwin RW-5AG5-0L50 RADWIN 5000 NEO-Duo HPMP HBS Base Station Radio User Manual

1. Folasaga

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Radwin RW-5AG5-0L50 RADWIN 5000 NEO-Duo HPMP HBS Base Station Radio. The RW-5AG5-0L50 is a high-performance sector Base Station radio unit (HBS) designed for wireless access connectivity, offering robust performance and advanced features for various networking environments.

2. Vaega Autu

The Radwin RW-5AG5-0L50 Base Station Radio incorporates several advanced features:

• Dual Carriers: Equipped with dual carriers base station radio and smart beamforming antennas for enhanced performance.
• High Throughput: Achieves up to 1.5 Gbps (2 x 750 Mbps) net aggregated throughput.
• Fa'ateleina le va'aiga: Supports long-range connectivity, up to 40 km (25 miles).
• Subscriber Unit Support: Capable of supporting up to 128 Subscriber Units (SUs).
• Maualalo Latency: Provides exceptional short and constant latency for critical applications.
• Fa'atekonolosi Mata'utia: Utilizes advanced MIMO, OFDM, and Diversity technologies for reliable communication.
• Fa'atonuga malosi: Designed for reliable operation in harsh conditions, extreme temperatures, and non-line-of-sight (NLOS) scenarios.
• GPS tu'ufa'atasi: Includes a separate smart beamforming antenna with embedded GPS.
• Lagolago masani: Operates within the 5.1 to 5.8 GHz frequency band.

3. Mea i totonu o le afifi

Upon unpacking, verify that all items are present and undamaged. The standard package typically includes:

• Radwin RW-5AG5-0L50 Base Station Radio Unit
• Mounting Bracket and Hardware (for pole or wall mounting)
• Power Supply Unit (PSU) or Power over Ethernet (PoE) Injector
• Faʻasaina o le Cable
• Taiala vave amata

Note: Specific contents may vary. Refer to your product packaging for exact details.

4. Fa'amatalaga Saogalemu

Observe the following safety precautions during installation, operation, and maintenance:

• O le fa'apipi'iina e tatau ona fa'atinoina e na'o tagata fa'apitoa.
• Ensure proper grounding of the unit to prevent electrical hazards.
• Do not operate the device near flammable gases or liquids.
• Use only the power supply provided or specified by the manufacturer.
• Avoid direct exposure to the antenna during transmission.
• Protect cables from damage and ensure secure connections.

5. Seti ma Fa'apipi'i

This section outlines the steps for physically installing and initially configuring your Radwin RW-5AG5-0L50 Base Station Radio.

5.1 Fa'amauina o le Iunite

The RW-5AG5-0L50 is designed for outdoor installation, typically on a pole or wall. Ensure the mounting location provides a clear line of sight to the intended coverage area and is free from obstructions.

1. Attach the mounting bracket to the desired pole or wall using the provided hardware. Ensure it is securely fastened.
2. Mount the RW-5AG5-0L50 unit onto the bracket. Adjust the angle for optimal coverage.
3. Secure all mounting screws to prevent movement due to wind or vibration.

Ata 1: Luma view of the Radwin RW-5AG5-0L50 Base Station Radio. This image shows the compact, rectangular enclosure of the unit, featuring a smooth, light-colored surface. The bottom edge reveals two connectors, indicating its outdoor and connectivity-focused design.

5.2 Power and Network Connections

Connect the power and network cables to the unit.

1. Connect the Ethernet cable from your network infrastructure to the appropriate port on the RW-5AG5-0L50. This cable will also provide Power over Ethernet (PoE) if using a compatible PoE injector or switch.
2. Ensure the grounding cable is properly connected from the unit to a reliable ground point.
3. Power on the unit. Observe the LED indicators for boot-up status.

5.3 Fa'asologa Muamua

Avanoa i le masini web-faʻavae pulega faʻavae mo le faʻatulagaina muamua.

1. Connect a computer to the same network as the RW-5AG5-0L50.
2. Tatala a web browser and enter the default IP address of the device (refer to the Quick Start Guide for the default IP and login credentials).
3. Log in using the default username and password. Change these credentials immediately for security.
4. Configure network settings, radio parameters (frequency, channel width, transmit power), and security settings as required for your network.

6. Fa'agaoioia le Masini

Once configured, the RW-5AG5-0L50 operates autonomously. Monitoring and management are typically performed via its web feso'ota'iga.

• Mata'ituina tulaga: O le web interface provides real-time status updates, including link quality, throughput, and connected subscriber units.
• Fa'atonuga Fa'atinoga: Adjust radio parameters as needed to optimize performance based on environmental conditions and network load.
• Faʻalauiloa Firmware: Regularly check for and apply firmware updates to ensure optimal performance and security.

7. Tausiga

Regular maintenance ensures the longevity and optimal performance of your Base Station Radio.

• Su'ega Faaletino: Periodically inspect the unit and cables for any signs of damage, corrosion, or loose connections.
• Fa'amamaina: Fa'amamā mālie le pito i fafo o le iunite i se mea vaivai.amp cloth. Do not use harsh chemicals or abrasive materials. Ensure connectors are free from dirt and moisture.
• Puleaina o Firmware: Keep the device firmware updated to the latest version. Refer to the manufacturer's website for available updates and instructions.
• Fa'atonu Fa'aola: Regularly back up your device configuration settings.

8. Faʻafitauli

O lenei vaega e maua ai fofo i faafitauli masani e te ono feagai.

9. Fa'amatalaga Fa'apitoa

Detailed specifications for the Radwin RW-5AG5-0L50 Base Station Radio:

10. Fa'amaonia ma Lagolago

For warranty information and technical support, please refer to the documentation included with your product or visit the official Radwin webnofoaga. Taofi lau lisiti fa'atau mo tagi fa'amaonia.

Punaoa i luga ole laiga: www.radwin.com