Pyle Two-Way Component Speaker System PL650CBL

1. Folasaga

This manual provides detailed instructions for the installation, operation, and maintenance of your Pyle Two-Way Component Speaker System, model PL650CBL. This system includes 6.5-inch midwoofers and separate tweeters, designed to enhance your vehicle's audio experience with 360 watts of maximum power. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your speakers.

2. O a mea oi totonu o le Pusa

Image: All components included in the Pyle PL650CBL Two-Way Component Speaker System package.

Your Pyle PL650CBL Two-Way Component Speaker System package should contain the following items:

• (2) Midwoofers: 6.5-inch speakers for mid-range and bass frequencies.
• (2) Tweeters: Separate speakers for high frequencies.
• (2) Crossover Network: Devices to separate audio signals for midwoofers and tweeters.
• mea'ai: Protective covers for the midwoofers.
• Uaea: Necessary wiring for connecting components.
• Fa'apipi'i Meafaigaluega: Assorted screws, clips, and brackets for installation.

3. Vaega

Image: Key features of the Pyle PL650CBL speaker system.

• 360 Watts Malosi maualuga: Designed for high power handling to deliver robust sound.
• Non-Fatiguing Butyl Rubber Surround: Provides durability and contributes to deeper mid-bass response.
• 1-inch High-Temperature ASV Voice Coil: Engineered to produce rich sound with low distortion, even at high volumes.
• Standard 6.5-inch Size: Designed to fit common OEM speaker locations in vehicles.
• Blue Poly Injection Cone: Aesthetically distinct and contributes to sound reproduction.
• 3/4-inch Neodymium PEI Dome Tweeter: Delivers clear high frequencies, contributing to a frequency response of 70Hz to 20KHz.
• 12dB Two-Way Impedance Matching Crossover Network: Ensures optimal signal distribution between the midwoofer and tweeter for balanced sound.
• Flush and Surface Mount Capability: Offers flexible installation options for the tweeters.

4. Fa'apipi'i

Proper installation is crucial for optimal performance and safety. If you are unsure about any steps, it is recommended to seek professional assistance. Always disconnect your vehicle's battery before beginning any electrical work.

4.1 Ata uaea

Image: Wiring connections for the Pyle PL650CBL speaker system.

The crossover network is essential for directing the correct frequency ranges to each speaker component. Connect the amplifier output to the input terminals of the crossover. Then, connect the midwoofer to the designated midwoofer output on the crossover, and the tweeter to the tweeter output. Ensure correct polarity (positive to positive, negative to negative) for all connections to prevent phase issues and ensure proper sound reproduction.

4.2 Tweeter Mounting Options

Image: Flush and surface mounting options for the tweeters.

The tweeters can be installed using either a flush mount or a surface mount method, depending on your vehicle's interior and aesthetic preference. Mounting hardware for both options is included. For flush mounting, a hole will need to be cut into the mounting surface. For surface mounting, the tweeter housing is secured directly to the surface.

5. Fa'amatalaga

6. Fa'atonuga o Galuega

Once installed, connect your speaker system to a compatible car audio amplifier or head unit. Ensure the volume is set to a low level before powering on your audio system. Gradually increase the volume to your desired listening level. The component design allows for a more detailed and accurate sound stage compared to coaxial speakers, with the tweeters providing clear high-frequency reproduction.

7. Tausiga

• Fa'amamaina: Faaaoga se ie vaivai ma mago e solo mālie ai le kiliva ma le kone o sipika. Aloese mai le faaaogaina o vailaau malolosi po o ni mea faamama e olo ai.
• Asiasiga: Siaki fa'avaitaimi uma feso'ota'iga uaea ina ia mautinoa o lo'o saogalemu ma sa'oloto mai le pala.
• Fa'alesiosiomaga: While designed for vehicle use, avoid exposing speakers to extreme moisture or direct sunlight for prolonged periods, as this can degrade materials over time.

8. Faʻafitauli

• Leai se leo:
  • Check all wiring connections from the amplifier to the crossover and to each speaker for secure contact and correct polarity.
  • Faamaonia o le amplifier or head unit is powered on and functioning correctly.
  • Ensure the audio source is playing and not muted.
• Leo fa'asese:
  • Reduce the volume level on your head unit or ample eletise. O le soona tuleia o sipika e mafai ona mafua ai le pi'o o le tulaga.
  • Check for loose wiring connections or damaged speaker cones/surrounds.
  • Ensure the crossover network is correctly installed and functioning.
  • Adjust equalizer settings on your head unit or amplifier to prevent excessive bass or treble that could cause distortion.
• Tasi le Fofoga Fetalai e le o galue:
  • Inspect the wiring for that specific speaker and its connection to the crossover.
  • Swap the non-working speaker with a known working one (if possible and safe) to determine if the issue is with the speaker or the wiring/source.

9. Fa'amaonia

The Pyle PL650CBL Two-Way Component Speaker System comes with a 1 Tausaga Fa'amaonia from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, neglect, unauthorized repair, or modification. Please retain your proof of purchase for warranty claims.

10. Lagolago

For technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please visit the official Pyle website or contact their customer service department. Refer to the product packaging or the Pyle webnofoaga mo fa'amatalaga fa'afeso'ota'i lata mai.

Visit the Pyle Store on Amazon