1. Folasaga
The Milestone MPT-II is a compact and portable 58mm thermal printer designed for various business applications, including retail, restaurants, and mobile logistics. It offers high-speed, clear printing and features Bluetooth connectivity for seamless integration with Android and iOS devices. Its lightweight design and long-lasting battery make it ideal for on-the-go printing needs.
2. Vaega Autu
- Lomitusi Bluetooth: Supports Android and iOS devices for wireless printing.
- feavea'i: Light and compact design allows for printing anywhere, anytime.
- Low Operating Cost: Direct thermal printing eliminates the need for ink ribbons or cartridges, requiring only thermal paper.
- Umi le ola maa: Built-in 7.4V/2500mAh rechargeable lithium battery provides up to 4 hours of continuous printing.
- Versatile Interface: Equipped with both USB and Bluetooth connectivity.
- ESC/POS Compatible: Supports standard ESC/POS print commands for broad software compatibility.
3. Seti Muamua
3.1 Ta'ese'esega ma Anotusi
Carefully unpack the printer and verify all components are present:
- 1 x Milestone MPT-II Thermal Printer
- 1 x USB Uaea
- 1 x USB Adaptor
- 1 x Pepa Lola
- 1 x User Manual (lenei pepa)
3.2 Totogiina le Lomitusi
- Connect the USB cable to the printer's charging port.
- Plug the USB adaptor into a standard power outlet.
- The charging indicator light will illuminate. Charge the printer fully before first use (approximately 2.5-3 hours for continuous printing).
3.3 Utaina o Pepa Vevela
- Open the paper compartment cover by gently pushing the latch.
- Insert the thermal paper roll with the printing side facing outwards (as shown in Figure 2). Ensure the roll is seated correctly.
- Toso ese se fasi pepa laʻitiiti i tua atu o le mata e tipi ai.
- Tapuni mau le ufi o le vaega pepa se'ia kiliki i lona nofoaga sa'o.
4. Fa'atonuga o Galuega
4.1 Fa'aola i luga/Pepe
- To power on: Press and hold the power button until the indicator light illuminates.
- E tape le eletise: Oomi ma uu le faamau o le eletise seia pe le moli faailoilo.
4.2 Feso'ota'iga Bluetooth
The MPT-II printer supports Bluetooth connectivity for mobile devices.
- Ensure the printer is powered on and within range of your mobile device.
- On your mobile device (Android/iOS), go to Bluetooth settings and turn Bluetooth on.
- Saili mo available devices. The printer will appear as "MPT-II".
- Select "MPT-II" to pair. If prompted for a password, enter 1234 or 0000.
- Once paired, the printer is ready for use with compatible applications.
4.3 Using with Applications
For mobile printing, you will need a compatible application. Milestone recommends downloading RAWBT Printer App or MYXPrint App from the Google Play Store. For iOS, search for compatible thermal printer apps in the App Store.
- Open your chosen printing application.
- Navigate to the printer settings within the app.
- Select the "MPT-II" printer from the list of available Bluetooth devices.
- You can now send print commands from the application.
4.4 Feso'ota'iga USB (mo le PC)
The printer can also be connected to a PC via USB. You may need to install a printer driver, which is typically available from the manufacturer's website or included on a CD with the product (if applicable).
5. Tausiga
5.1 Fa'amama le Lomitusi
To ensure optimal performance and print quality, regularly clean the printer:
- Ulu lolomi: Faaaoga māmā se vavae vavaeampFa'asusu i le isopropyl alcohol e solo mālie ai le ulu lolomi vevela. Tu'u e mago atoa a'o le'i fa'aaogaina.
- Ala Pepa: Use a soft, dry cloth or a small brush to remove any paper dust or debris from the paper path.
- fafo: Solo le pito i fafo o le lomitusi i se solo vaivai.amp ie. Aloese mai le fa'aaogaina o vaila'au malolosi po'o ni mea e fa'amama ai.
5.2 Tausiga maa
- Totogi atoa le maʻa aʻo leʻi muamua faʻaaogaina.
- Aloese mai le sasaa atoa o le maa i taimi uma.
- If storing the printer for an extended period, charge it to about 50% and recharge every few months to prevent battery degradation.
6. Faʻafitauli
| Fa'afitauli | Mafuaaga e ono tupu | Fofo |
|---|---|---|
| E le ki le masini lomitusi. | Ua vaivai pe ua uma le maa. | Charge the printer using the provided USB cable and adaptor. |
| Le mafai ona feso'ota'i ile Bluetooth. | Bluetooth is off on device; incorrect pairing password; printer not discoverable. | Ensure Bluetooth is enabled on your device. Re-attempt pairing with password 1234 or 0000. Restart both printer and device. |
| No print output or blank paper. | Paper loaded incorrectly; out of paper; print head dirty. | Check paper orientation (printing side out). Replace paper roll if empty. Clean the thermal print head (refer to Maintenance section). |
| Poor print quality (faded, lines). | Print head dirty; low battery; poor quality thermal paper. | Clean the print head. Charge the printer fully. Use high-quality thermal paper. |
| Printer beeps continuously. | Paper alarm (out of paper or paper jam); low battery reminder. | Check and replace paper roll or clear jam. Charge the printer. |
7. Fa'amatalaga Fa'apitoa
| Fa'aaliga | Fa'amatalaga |
|---|---|
| Metotia Lomitusi | Lomiga laina vevela |
| Lomiga Lautele | Paper width 58mm, effective width 58mm |
| Lolomi Lolomi | 576 togi/laina |
| I'ugafono | 8 dots/mm, 203 DPI |
| Lomiga Saosaoa | 70mm/s (Max Print speed Monochrome: 50 ppm) |
| Printer Core Life | 50KM (25% print density or less than 100 million pulses) |
| Printable Content | English, numbers, symbols, characters, pictures, 1D/2D barcode, multi-languages |
| Fa'amatalaga Feso'ota'iga Fa'amatalaga | USB / Bluetooth |
| Paoa sapalai | Machine charging 9V-1.5A |
| Ma'a | Built-in rechargeable 2600mAh lithium-ion battery (7.4V/2500mAh) |
| Continuous Printing Time | 2.5-3 itula |
| Seti o Faatonuga | ESC / POS fetaui |
| Otipepepa | Manually tear |
| Faiga Fa'atonu Fa'atasi | Android, iOS, Windows |
| Fua o Mea | 15D x 12W x 6H Sinimita |
| Mea mamafa | 310 kalama |
| Fa'aaofia Vaega | 1 x Thermal Printer, 1 x USB Cable, 1 x USB Adaptor, 1 x Paper Roll, 1 x User Manual |
8. Fa'amaonia ma Lagolago
This product comes with a 10-day warranty as per the purchase terms. For any technical assistance, troubleshooting beyond this manual, or warranty claims, please contact your retailer or the manufacturer's customer support. Refer to your purchase documentation for specific contact details.
Tufuga: Milestone
Fa'aulufale mai: SB RETAILS, SECTOR 28, PRADHIKARAN, PUNE-44, +918888881631