Orbit Easy Dial 6-Station Indoor Sprinkler Controller

1. Folasaga

The Orbit 6-zone indoor sprinkler controller is designed to provide convenient and flexible control over your lawn or garden watering schedule. Its user-friendly interface simplifies setup and customization, offering features such as rain delay, water budgeting, and dual watering programs to meet specific irrigation needs.

This manual provides detailed instructions for the installation, operation, and maintenance of your Orbit Easy Dial Sprinkler Controller.

Vaega Autu:

• Filifiliga Fa'asusu Fetuutuuna'i: Set water duration for each station between 1-240 minutes.
• Efficient Watering Schedule: Up to 8 start times per day to reduce water runoff.
• Rain Delay Feature: Pause watering for 24, 48, or 72 hours.
• Water Budgeting: Adjust run times based on seasonal changes.
• Dual Watering Programs: Independent programs for customized intervals, days of the week, or even/odd watering days.

Ata 1.1: Luma view of the Orbit Easy Dial 6-Station Indoor Sprinkler Controller, showing the LCD display, control buttons, and rotary dial.

2. Fa'amatalaga Saogalemu

Please read all safety information before installing or operating the controller. Failure to follow these instructions could result in injury or property damage.

• This controller is designed for fa'aoga i totonu na'o totonu. Do not install outdoors or in areas exposed to water.
• Ensure the power supply is disconnected before performing any wiring or maintenance.
• All electrical connections should be made in accordance with local electrical codes.
• Aua le taumafai e toe faaleleia le masini oe lava. Ia faasino atu auaunaga uma i tagata agavaa.

3. Seti ma Fa'apipi'i

3.1 Fa'amauina le Pule

Choose a suitable indoor location near a standard 120V AC electrical outlet. Avoid areas with extreme temperatures or direct sunlight.

1. Faailoga le nofoaga e faʻapipiʻi ai i luga o le puipui.
2. Install two mounting screws (not included) into the wall, leaving approximately 1/8 inch (3 mm) of the screw head exposed. The screws should be spaced vertically to align with the keyhole slots on the back of the controller.
3. Hang the controller on the screws.

Ata 3.1: Esoample of the controller mounted on a wall in an indoor setting.

3.2 Wiring the Controller

Before wiring, ensure the power adapter is unplugged from the electrical outlet.

1. Common Wire (COM): Connect the common wire from your sprinkler valves to the terminal labeled 'COM' on the controller. This is typically a white wire.
2. Zone Wires (1-6): Connect each individual zone wire from your sprinkler valves to the corresponding numbered terminals (1 through 6) on the controller.
3. Rain Sensor (Optional): If using a rain sensor (sold separately), connect its wires to the 'SENSOR' terminals. Ensure the rain sensor switch inside the controller is set to 'ON' if a sensor is connected. If no sensor is used, keep the switch 'OFF' and ensure the jumper wire is in place between the sensor terminals.
4. So'oga Malosi: Plug the included 24V AC transformer into the '24VAC' terminals on the controller. Then, plug the transformer into a standard 120V AC electrical outlet.

Ata 3.2: Auiliiliga view of the wiring terminals, showing connections for 24VAC, SENSOR, COM, and zones 1-6.

4. Fa'atonuga o Galuega

The Orbit Easy Dial controller features a rotary dial for selecting functions and a set of buttons for adjusting settings.

Figure 4.1: Control panel overview, highlighting the LCD display, directional buttons, and function dial.

4.1 Setting Current Time and Date

1. Liliu le telefoni i ASO/UATI.
2. Fa'aaoga le + ma - buttons to set the current year, then press Ulufale.
3. Repeat for month, day, hour, and minute.

4.2 Programming Watering Schedules (Programs A & B)

The controller supports two independent programs (A and B) for different watering needs.

4.2.1 Setting Start Times

1. Liliu le telefoni i TAIMI AMATA.
2. The display will show '1'. Use + ma - to set the first start time, then press Ulufale.
3. Continue setting up to 8 start times for the current program. To skip a start time, press Ulufale without setting a time.
4. To switch between Program A and B, press the PROGRAM A-B faamau.

4.2.2 Setting Run Times (How Long)

1. Liliu le telefoni i LE A LE UMI.
2. The display will show 'STATION 1'. Use + ma - to set the watering duration (1-240 minutes) for Station 1, then press Ulufale.
3. Repeat for each station (1-6).
4. To switch between Program A and B, press the PROGRAM A-B faamau.

4.2.3 Setting Watering Days (How Often)

1. Liliu le telefoni i E FAAFIA.
2. E mafai ona e filifili mai filifiliga e tolu:
• Days of the Week: Fa'aaoga le AU TAUMATAU button to move to the desired day, then press Ulufale to select/deselect.
• Vaitaimi: Fa'aoga + ma - to set the interval (e.g., every 2 days).
• Even/Odd Days: Select 'EVEN' or 'ODD' for watering on even or odd calendar days.
3. To switch between Program A and B, press the PROGRAM A-B faamau.

4.3 Rain Delay Feature

The rain delay feature allows you to temporarily suspend your watering schedule for a set period.

1. Liliu le telefoni i AUTO.
2. Oomi le TOTOLE timu faamau.
3. Fa'aaoga le + ma - buttons to select a delay of 24, 48, or 72 hours.
4. The controller will automatically resume the schedule after the delay period. To cancel, press MANINO.

4.4 Water Budgeting

The water budgeting feature allows you to adjust all programmed run times by a percentage, useful for seasonal adjustments without reprogramming each station.

1. Liliu le telefoni i TUPE.
2. Fa'aaoga le + ma - buttons to adjust the percentage (e.g., 50% to reduce watering by half, 150% to increase by 50%).
3. The change applies to all active programs and stations.

4.5 Fa'agaioiga Tusia

To manually water a specific station or all stations:

1. Liliu le telefoni i AUTO.
2. Oomi le MANUAL faamau.
3. Fa'aaoga le AU TAUMATAU or AU AGA VALE buttons to select the desired station or 'ALL' for all stations.
4. Tusitala Ulufale.
5. Fa'aoga + ma - to set the manual run time.
6. Tusitala Ulufale e amata fa'asusu tusilima.
7. Ina ia taofi le fa'asusuina o le tusi, fetaomi MANINO.

4.6 Turning Off the Controller

To stop all automatic watering, turn the dial to TOTO. The controller will retain its programming.

5. Tausiga

• Keep the controller clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Ensure the controller is not exposed to moisture or direct water spray.
• Periodically check wiring connections to ensure they are secure.
• During winter months in cold climates, it is recommended to disconnect the controller and store it indoors to prevent damage from freezing temperatures.

6. Faʻafitauli

7. Fa'amatalaga

8. Fa'amaonia ma Lagolago

For specific warranty information and detailed support, please refer to the official Orbit website or contact Orbit customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Orbit is a leading provider of watering solutions, committed to delivering quality products and customer satisfaction.

You can visit the official Orbit store for more information and product support: Orbit Store on Amazon