Tusitaiala mo le Tagata Fa'aoga o le AirTies Airi Point 4920 Dual-Band Wireless Access Point

Folasaga

The AirTies Airi Point 4920 is a smart mesh WiFi enhancement device designed to create a more reliable and higher capacity WiFi network. It utilizes intelligent mesh technology to expand coverage throughout your home or office, supporting various smart devices. This device offers dual-band 802.11ac connectivity and user-friendly secure network configuration.

This manual provides instructions for setting up, operating, and maintaining your Airi Point 4920 to ensure optimal performance.

O mea o lo'o i totonu

Fa'amolemole fa'amautinoa o lo'o iai mea uma i lau afifi:

• Airi Point 4920 Extender Unit
• Uaea Ethernet
• Fetuunaiga Malosi

Ua Umaview

Laupapa luma

Ata: Luma view of the AirTies Airi Point 4920. Visible are the Airi logo, and LED indicators for 5 GHz, 2.4 GHz, Power, and a WPS button at the bottom.

• 5 GHz LED: Indicates the status of the 5 GHz wireless network.
• 2.4 GHz LED: Indicates the status of the 2.4 GHz wireless network.
• LED Malosiaga: Fa'ailoa mai le tulaga malosi o le masini.
• WPS faamau: Used for quick and secure connection to a WPS-enabled router.

Laufanua Tua

Ata: Tua view of the AirTies Airi Point 4920. It features two Gigabit Ethernet ports (labeled 1 and 2), a 12V power input, an On/Off switch, and a Reset button.

• Gb Ethernet Ports (1, 2): Gigabit Ethernet ports for wired connections to devices or your main router.
• 12V Power Input: Fa'afeso'ota'i le feso'ota'iga eletise tu'u mai iinei.
• Ki/Peti Suiga: Fa'aola le masini i luga pe tape.
• Toe Seti ki: Used to restore the device to factory default settings. Press and hold for 10 seconds while the device is powered on.

Seti Faatonuga

Follow these steps to set up your AirTies Airi Point 4920:

1. Malosiaga: Connect the power adapter to the 12V power input on the rear panel and plug it into a power outlet. Turn on the device using the On/Off switch. Wait for the Power LED to become solid.
2. Tu'uga: Place the Airi Point 4920 in a central location within your home or office, ideally halfway between your main router and the area where you need improved WiFi coverage. Avoid placing it near large metal objects, concrete walls, or other sources of interference.
3. Connect to Existing Network (WPS Method):
   • Ensure your main router supports WPS.
   • Press the WPS button on your main router.
   • Within two minutes, press the WPS button on the front panel of the Airi Point 4920.
   • The 2.4 GHz and 5 GHz LEDs on the Airi Point 4920 will flash during the connection process and become solid when successfully connected.
4. Connect to Existing Network (Manual Method - if WPS fails or is unavailable):
   • Connect your computer or mobile device to the Airi Point 4920's default WiFi network (SSID and password usually found on a label on the device).
   • Tatala a web browser and navigate to the device's default IP address (e.g., 192.168.1.1 or airties.local - consult the device label or quick start guide for exact address).
   • Follow the on-screen instructions to scan for available WiFi networks and select your main router's network. Enter your main router's WiFi password when prompted.
   • Configure the Airi Point 4920 to extend your existing network.
5. Wired Connection (Optional): If you wish to use the Airi Point 4920 as a wired access point or connect wired devices, use the provided Ethernet cable to connect one of the Gb Ethernet ports on the rear panel to your main router or a wired device.
6. Fa'amaonia So'oga: Once connected, the 2.4 GHz and 5 GHz LEDs should be solid, indicating a successful connection to your main network. You can now connect your wireless devices to the extended WiFi network.

Note on AT&T Compatibility: While some users have successfully integrated this device with AT&T fiber modems using a wired connection, the manufacturer states it is "Not Compatible with AT&T." Specific AT&T services or configurations may prevent proper operation. Users should verify compatibility with their specific AT&T setup if issues arise.

Fa'atonuga o Galuega

Once set up, the Airi Point 4920 operates automatically to extend your WiFi network. Here are some operational aspects:

• Ta'amilosaga e leai se mea In a mesh configuration, your devices should automatically switch between your main router and the Airi Point 4920 for the best signal, providing seamless connectivity as you move around your coverage area.
• Feso'ota'i Fa'atasiga Lua: The device supports both 2.4 GHz and 5 GHz frequencies. The 2.4 GHz band offers wider coverage, while the 5 GHz band provides faster speeds over shorter distances. Your devices will connect to the optimal band automatically.
• Wired Device Connection: Use the Gigabit Ethernet ports on the rear to connect wired devices such as smart TVs, gaming consoles, or desktop computers for a stable, high-speed connection.
• Fa'ailoga LED: Monitor the LEDs on the front panel to quickly assess the device's status. Solid LEDs typically indicate a stable connection.

Tausiga

To ensure the longevity and optimal performance of your Airi Point 4920, consider the following maintenance tips:

• Fa'amamaina: Gently wipe the device with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Savili: Ensure the device is placed in a well-ventilated area and that its vents are not obstructed to prevent overheating.
• Faʻalauiloa Firmware: Periodically check the AirTies support website for any available firmware updates. Keeping your device's firmware up-to-date can improve performance, security, and add new features.
• Toe amata: If you experience network issues, try restarting the device by turning it off and then on again using the On/Off switch.

Fa'afitauli

If you encounter issues with your Airi Point 4920, refer to the following common problems and solutions:

Fa'amatalaga

Fa'amaonia ma Lagolago

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official AirTies support website. Contact information for customer service is typically available on the manufacturer's webnofoaga.

Please have your model number (4920) and product serial number ready when contacting support.