Sharp Digital Alarm Clock User Manual

1. Folasaga

Welcome to the user manual for your Sharp Digital Alarm Clock. This guide provides detailed instructions for setting up, operating, and maintaining your alarm clock to ensure reliable performance. Please read this manual thoroughly before use and retain it for future reference.

Ata 1.1: Luma view of the Sharp Digital Alarm Clock, displaying '12:08' in red LED digits, with 'PM' and 'ALARM' indicators. Below the display are buttons labeled 'TIME', 'ALARM', 'HOUR', 'MIN', and a large 'SNOOZE' button, along with an 'ON/OFF ALARM' switch.

2. Fa'amatalaga Saogalemu

Ia matau puipuiga nei e puipuia ai le faaleagaina o le masini pe manu'a ai se tagata:

• Ensure the power adapter is compatible with your local power supply (120V AC, 60Hz).
• Do not expose the clock to water, moisture, or extreme temperatures.
• Avoid placing the clock near heat sources or in direct sunlight.
• Use only the specified battery type (2x AAA) for backup. Do not mix old and new batteries or different battery types.
• Lafoa'i ma'a fa'aaoga e tusa ai ma tulafono fa'alotoifale.
• Do not attempt to disassemble or repair the clock yourself. Refer all servicing to qualified personnel.

3. Mea i totonu o le afifi

Fa'amautinoa o lo'o iai mea uma i totonu o le afifi:

• Uati Fa'ailo Mata'i
• AC Power Adapter (attached)
• Tusi Lesona a le Tagata (lenei pepa)

Note: 2x AAA batteries for backup are not included and must be purchased separately.

4. Oloa Ua Ovaview

Familiarize yourself with the controls and display features of your Sharp Digital Alarm Clock.

Ata 4.1: Tulaga i lalo view of the Sharp Digital Alarm Clock with labels indicating the function of each button. From left to right: 'TIME' button (Time Set), 'ALARM' button (Alarm Set), 'HOUR' button (Hour Set), 'MIN' button (Minute Set), 'SNOOZE' button, and 'ON/OFF ALARM' switch.

4.1. Pulea

• Fa'amau TAIMI: Used to enter time setting mode.
• Ki ALARM: Used to enter alarm setting mode.
• HOUR Button: Adjusts the hour during time or alarm setting.
• MIN faamau: Adjusts the minute during time or alarm setting.
• Ki SNOOZE: Activates the snooze function when the alarm sounds.
• Ki o le Alarm ON/OFF: Toggles the alarm function on or off.

4.2. Fa'aali Fa'ailoga

• Red LED Display: Shows the current time and alarm settings.
• PM Indicator: A small red dot illuminates to indicate PM hours.
• ALARM Indicator: A small red dot illuminates when the alarm is set to ON.

5. Seti

5.1. Mana Feso'ota'i

1. Uncoil the attached AC power cord.
2. Plug the power cord into a standard 120V AC, 60Hz wall outlet. The display will illuminate, and the clock will be ready for time setting.

5.2. Installing Battery Backup

The clock requires 2x AAA batteries (not included) for backup functionality. These batteries maintain time settings during a power outage, but the display will not be illuminated.

1. Locate the battery compartment on the bottom of the clock.
2. Tatala le ufiufi o le vaega o maa.
3. Insert 2 new AAA batteries, observing the correct polarity (+ and -) as indicated inside the compartment.
4. Tapuni lelei le ufiufi o le vaega o maa.

6. Fa'atonuga o Galuega

6.1. Setiina o le Taimi Nei

1. Oomi ma uu le TAIMI button. The hour digits will begin to flash.
2. A o uuina le TAIMI faamau, fetaomi le ITULA button repeatedly to advance the hour. Observe the PM indicator for correct AM/PM setting.
3. A o uu pea le TAIMI faamau, fetaomi le MIN button repeatedly to advance the minutes.
4. Fa'asa'oloto le TAIMI faamau e sefe ai le taimi o loʻo iai nei.

6.2. Setting the Alarm Time

1. Oomi ma uu le ALAGALO button. The alarm hour digits will begin to flash.
2. A o uuina le ALAGALO faamau, fetaomi le ITULA button repeatedly to set the desired alarm hour. Observe the PM indicator for correct AM/PM setting.
3. A o uu pea le ALAGALO faamau, fetaomi le MIN button repeatedly to set the desired alarm minutes.
4. Fa'asa'oloto le ALAGALO faamau e teu ai le taimi fa'ailo.

6.3. Fa'agaoioia/Tapeaina o le Alarm

• To activate the alarm, slide the ALARM ON / MATUA switch to the 'ON' position. The ALARM indicator dot will illuminate on the display.
• To deactivate the alarm, slide the ALARM ON / MATUA switch to the 'OFF' position. The ALARM indicator dot will turn off.

6.4. Using the Snooze Function

• A tatagi le faailo, oomi le tele SNOOSE button. The alarm will temporarily stop and sound again after approximately 9 minutes.
• E mafai ona e oomi le SNOOSE button repeatedly for additional snooze cycles until the alarm is manually switched off.

6.5. Taofi le Alarm

• To stop the alarm completely after it sounds, slide the ALARM ON / MATUA switch to the 'OFF' position. The alarm will reset for the next day at the set time.

7. Faʻafitauli

If you encounter issues with your Sharp Digital Alarm Clock, refer to the following common problems and solutions:

8. Fa'amatalaga

Image 8.1: Diagram showing the dimensions of the Sharp Digital Alarm Clock: 2.25 inches in height, 4.35 inches in width, and 3.2 inches in depth.

9. Fa'amaonia ma Lagolago

Sharp products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Sharp website. For technical support or service inquiries, please contact Sharp customer service through their official channels.

Mo nisi fa'amatalaga, e mafai ona e asiasi i le Faleoloa Sharp i luga o le Amazon.