Rittal 1280.000 Wall-mounted AX Enclosure

1. Oloa Ua Ovaview

The Rittal 1280.000 Wall-mounted AX Enclosure is a robust carbon steel enclosure designed for industrial and IT infrastructure applications. It features an innovative 25 mm system grid, allowing for flexible and easy installation of internal components and accessories without the need for drilling, thereby maintaining its protection class. This enclosure is suitable for various environments, offering NEMA 1, 3R, 4, and 12 protection.

Vaega Autu:

• Mea: Carbon steel construction.
• itu: 47.2 inches (Height) x 31.5 inches (Width) x 11.8 inches (Depth).
• Puipuiga: NEMA 1, 3R, 4, 12 rated for environmental protection.
• System Grid: Integrated 25 mm system grid for versatile interior finishing.
• Faitotoa: Features an all-round foamed-in PU seal for enhanced protection.
• Ipu tiʻetiʻe: Zinc-plated, measuring 29.3 inches x 46.3 inches.

2. Fa'amatalaga Saogalemu

Please read and understand all safety instructions before installing or operating the Rittal AX Enclosure. Failure to follow these instructions may result in injury, damage to the product, or voiding of the warranty.

• Saogalemu Faaeletise: Ensure all power is disconnected before working inside the enclosure. Only qualified personnel should perform electrical installations.
• mamafa: The enclosure weighs approximately 140 pounds. Use appropriate lifting equipment and techniques to prevent injury during handling and installation.
• Mata'i pito: Exercise caution when handling the enclosure and its components, as some edges may be sharp. Wear appropriate personal protective equipment (PPE), including gloves.
• Fa'amauina: Ensure the mounting surface is structurally sound and capable of supporting the total weight of the enclosure and its contents.

3. Mea i totonu o le afifi

Upon receiving your Rittal AX Enclosure, carefully inspect the packaging for any signs of damage. Open the package and verify that all components are present:

• Enclosure housing with door(s)
• Flange (gland) plate(s) in the enclosure base
• Fa'apipi'i ipu
• Tu'i faitoto'a fasi pepa
• Loka: 3mm pa'u-lua
• Fa'atonuga tusi ma fa'amaumauga

If any items are missing or damaged, contact Rittal customer support immediately.

4. Seti ma Fa'apipi'i

The Rittal AX Enclosure is designed for straightforward installation. Follow these steps for proper mounting and initial setup:

4.1. Faʻaputuga o Pa

1. Sauni le Laupapa Fa'amau: Ensure the wall is clean, dry, and capable of supporting the enclosure's weight. Mark the desired mounting points.
2. Fa'apipi'i Fa'amau Fa'amau: Secure the appropriate mounting brackets (not included, sold separately) to the rear of the enclosure using the designated attachment points.
3. Si'i ma Saogalemu: Carefully lift the enclosure into position. Align the mounting brackets with the marked points on the wall and secure the enclosure using appropriate fasteners. Ensure the enclosure is level and firmly attached.
4. Fa'amaonia le mautu: After mounting, gently test the enclosure's stability to confirm it is securely fastened to the wall.

4.2. Internal Component Installation

The AX enclosure features an integrated 25 mm system grid for flexible interior finishing. This allows for easy installation and retrofitting of system components and accessories without drilling, preserving the enclosure's protection class.

1. Access the Interior: Open the enclosure door using the 3 mm double-bit lock.
2. Fa'apipi'i mea fa'apipi'i: The zinc-plated mounting plate is pre-installed. If removed for external work, re-install it securely.
3. Utilize System Grid: Attach internal rails, mounting plates, and other accessories directly to the embossed enclosure cams in the roof, base, and side sections. Use self-tapping screws for secure fastening while maintaining UL compliance.
4. Pulega o uaea: Plan cable routing to ensure proper organization and prevent interference with components or the door seal.

5. Galuega

Operating the Rittal AX Enclosure primarily involves accessing its interior for maintenance or modifications. The door is secured with a 3 mm double-bit lock.

1. Tatala le Faitotoa: Insert a 3 mm double-bit key into the lock and turn to unlock. Pull the door open.
2. Tapuni le Faitotoa: Push the door firmly shut until it engages with the frame. Turn the key to lock the door. Ensure the door is fully closed and locked to maintain the specified protection class.

Ata: Luma view of the Rittal AX Enclosure, showing the door and the 3 mm double-bit lock mechanism.

6. Tausiga

Regular maintenance ensures the longevity and continued protection offered by your Rittal AX Enclosure.

• Fa'amamaina: Clean the exterior surfaces with a soft cloth and mild detergent. Avoid abrasive cleaners or solvents that could damage the textured paint finish.
• Su'ega Fa'amau: Periodically inspect the all-round foamed-in PU seal on the door for any signs of wear, cracks, or damage. A compromised seal can reduce the enclosure's protection rating. Replace damaged seals promptly.
• Loka Mechanism: Lubricate the lock mechanism annually with a suitable lubricant to ensure smooth operation.
• Siaki Fa'amau: Periodically check all mounting fasteners and internal component fasteners for tightness. Re-tighten as necessary.

7. Faʻafitauli

This section addresses common issues you might encounter with your Rittal AX Enclosure.

• Mataupu: Door does not close or seal properly.
  Fofo: Check the door seal for obstructions or damage. Ensure the hinges are properly aligned and the lock mechanism is functioning correctly.
• Mataupu: Enclosure feels unstable after mounting.
  Fofo: Verify that all mounting fasteners are securely tightened and that the wall or mounting surface is adequate for the load. Consult a structural engineer if concerns persist.
• Mataupu: Difficulty installing internal components.
  Fofo: Ensure you are using compatible Rittal system accessories designed for the 25 mm grid. Refer to the specific accessory's instructions for proper installation.

8. Fa'amatalaga

Detailed technical specifications for the Rittal 1280.000 Wall-mounted AX Enclosure:

Ata: O se vaaiga mamao view of the Rittal 1280.000 Wall-mounted AX Enclosure, showcasing its overall design and light gray finish.

9. Fa'amaonia ma Lagolago

Rittal products are manufactured to high-quality standards. For warranty information, technical support, or to purchase replacement parts and accessories, please visit the official Rittal website or contact your local Rittal distributor.

Tufuga: Rittal LLC

Muamua Avanoa: Oketopa 16, 2021

For further assistance, refer to the contact information provided on the Rittal Store on Amazon.