Epson V12HA06A05 Projector Wall Mount

Ua Umaview

The Epson V12HA06A05 is an ultra-short throw wall mount designed for compatible Epson projectors. This mount provides a stable and adjustable solution for positioning your projector to achieve optimal display sizes for 16:9 and 16:6 content.

It features a telescopic extension arm and a 3-point axis for precise adjustments, ensuring proper alignment and projection quality.

Fa'aaofia Vaega

Fa'amautinoa o lo'o iai vaega uma a'o le'i amata fa'apipi'i:

• Papa puipui
• Telescopic mount arm
• 3-point axis adjustment mechanism
• Fa'alili fa'apotopotoga
• Two-piece wall plate cover
• Fa'atonu tusi (le pepa lenei)

Seti ma Fa'apipi'i

Puipuiga o le Saogalemu: Ensure the mounting surface is structurally sound and capable of supporting the combined weight of the mount and projector. Use appropriate tools and follow all local building codes. It is recommended to have two people for installation.

Mea faigaluega Manaʻomia (le aofia ai): Drill, drill bits, level, screwdriver (Phillips and flathead), measuring tape, stud finder (if mounting to drywall).

Laasaga fa'apipi'i:

1. Filifili le nofoaga e fa'apipi'i ai: Determine the ideal position on the wall based on your desired screen size and projector throw distance. Ensure there are no electrical wires or plumbing behind the wall at the chosen location.
2. Fa'apipi'i le Papa o le Puipui:
   • Position the wall plate against the wall and use a level to ensure it is straight.
   • Mark the drilling points through the wall plate's screw holes.
   • Drill pilot holes according to the recommended drill bit size for your wall type (e.g., wood studs, concrete, drywall anchors).
   • Secure the wall plate to the wall using the provided assembly screws.
3. Attach the Telescopic Mount Arm: Connect the telescopic mount arm to the secured wall plate using the designated fasteners. Ensure all connections are tight and secure.
4. Fa'apipi'i le Projector: Carefully attach your compatible Epson projector to the mount arm's projector plate. Refer to your projector's manual for specific attachment points.
5. Apply Wall Plate Cover: Once the mount is securely installed and the projector attached, place the two-piece wall plate cover over the wall plate for a finished appearance.

Ata 1: The Epson V12HA06A05 wall mount with its telescopic arm extended, showing the projector mounting platform and the wall plate. This image illustrates the primary components and their assembled configuration.

Fa'agaioiga ma Fetuunaiga

After installation, fine-tune the projector's position for optimal image quality.

• Telescopic Extension: The mount features a telescopic arm that allows for adjustment of the projector's distance from the wall. Loosen the locking mechanism, extend or retract the arm to achieve the desired throw distance, and then secure the mechanism.
• 3-Point Axis Adjustment: Utilize the 3-point axis system to precisely adjust the projector's tilt, swivel, and rotation. This allows for fine-tuning of the image alignment on your screen. Refer to the specific adjustment points on the mount for their functions.
• Compatible Projectors: This mount is compatible with Epson BrightLink 1485Fi, 1480Fi; PowerLite 800F, 750F, 685W, 7200, 720c, 725W, 755F, 805F series projectors.
• Content Display: Supports 16:9 content from 65 to 100 inches and 16:6 content up to 120 inches (BrightLink 1485Fi).

Tausiga

Regular maintenance ensures the longevity and proper function of your projector wall mount.

• Fa'amamaina: Solo ese mea e fa'apipi'i ai i se ie vaivai ma mago. 'Alo'ese mai vaila'au fa'amama po'o vaila'au fa'amama e ono fa'aleagaina ai le vali.
• Siaki So'oga: Periodically inspect all screws and fasteners to ensure they remain tight. Re-tighten if necessary, but do not overtighten.
• Siakiga Gaoioiga: If the mount has adjustable parts, occasionally operate them to ensure smooth movement.

Fa'afitauli

If you encounter issues with your projector wall mount, consider the following:

• Mount is not level: Re-check the wall plate installation with a level. Adjust if possible, or re-install if significantly off.
• Projector image is distorted/misaligned: Use the 3-point axis adjustment mechanism to fine-tune the projector's position. Ensure the projector is securely attached to the mount.
• Mount feels unstable: Immediately check all mounting screws and connections. Ensure the wall structure is adequate for the weight. Do not use the mount if it feels unstable.
• Difficulty adjusting telescopic arm: Ensure the locking mechanism is fully disengaged before attempting to extend or retract the arm. Check for any obstructions.

Fa'amatalaga

Fa'amatalaga Fa'amaonia

This Epson V12HA06A05 Projector Wall Mount is covered by a Limited Warranty. For detailed terms and conditions, please refer to the warranty documentation included with your purchase or visit the official Epson support webnofoaga.

Lagolago Tagata Fa'atau

For further assistance, technical support, or to inquire about replacement parts, please contact Epson customer support. Visit the official Epson webnofoaga mo faʻamatalaga faʻafesoʻotaʻi ma punaoa lagolago.

Manatua: O faʻamatalaga o oloa ma foliga vaaia e mafai ona suia e aunoa ma se faʻaaliga.