Sharp Microwave Tall Chrome Wire Rack Instruction Manual

1. Oloa Ua Ovaview

This document provides essential instructions for the proper use and maintenance of your Sharp Tall Chrome Wire Rack. This accessory is designed to enhance the functionality of compatible Sharp microwave ovens, specifically for convection cooking.

Figure 1: Sharp Tall Chrome Wire Rack. This image displays the circular chrome wire rack with four support legs, designed for use in convection microwave ovens.

2. Fegalegaleai

This Tall Chrome Wire Rack is specifically designed for use with the following Sharp Microwave Oven models:

• Sharp R-1870
• Sharp R-1872

If your microwave model is not listed, please verify compatibility before use. Using an incompatible rack may lead to improper cooking results or damage to the appliance.

3. Fa'amatalaga Taua mo le Saogalemu

WARNING: Do NOT use this rack when operating your microwave oven in microwave mode.

• This rack is intended exclusively for use during convection oven mode fa'agaioiga.
• Using metal racks during microwave mode can cause arcing, damage to the microwave oven, and potential fire hazards.
• Always ensure the correct cooking mode is selected before placing the rack inside the oven.

4. Fa'atonuga Fa'aaogā

4.1. Setup for Convection Cooking

1. Ensure your Sharp microwave oven is clean and free of debris.
2. Place the Tall Chrome Wire Rack directly onto the turntable or oven floor, depending on your microwave model's design for convection use. This rack is designed for two-level cooking, allowing you to place items on the rack and below it.
3. Position food items on the rack as required for your convection recipe.
4. Close the microwave oven door securely.
5. Select the appropriate convection cooking function on your microwave oven.
6. Set the desired temperature and cooking time according to your recipe.
7. Begin the convection cooking cycle.

The rack elevates food, allowing for better air circulation during convection baking and roasting, promoting even cooking and browning.

5. Tausiga ma Tausiga

Proper cleaning and maintenance will extend the life of your chrome wire rack.

• Pe a uma Fa'aoga Ta'itasi: Wash the rack in mild, sudsy water.
• Mo stains Stubborn: Use a mild kitchen cleanser and a non-abrasive scouring sponge.
• Saogalemu le fufulu ipu: The rack is dishwasher-proof for convenient cleaning.
• Teuina: When not in use, remove the rack from the microwave oven and store it in a dry place.

6. Fa'amatalaga

• Ituaiga: Tall Chrome Wire Rack
• Mea: Chrome-plated metal
• Lanu: Chrome
• Fua Faatatau: 12 x 12 x 10 inches (Package Dimensions, actual rack dimensions may vary slightly)
• Pe tusa o le mamafa o mea: 2 aunese
• Fegalegaleai: Sharp Microwave Models R-1870, R-1872

7. Faʻafitauli

If you encounter issues with your wire rack, consider the following:

• Arcing/Sparks: Immediately stop the microwave oven. Ensure the rack is only used in convection mode. Remove any metallic debris or food residue that might be causing arcing.
• Kuka le tutusa: Ensure the rack is placed correctly and not obstructing the turntable's rotation (if applicable). Verify that the microwave oven's convection fan is operating correctly.
• Rack Does Not Fit: Double-check your microwave model number against the compatibility list in Section 2. Microwave models have varying rack diameters.

8. Fa'amaonia ma Lagolago

For warranty information or further support regarding your Sharp Tall Chrome Wire Rack, please refer to the documentation provided with your Sharp microwave oven or contact Sharp customer service directly.

If your specific microwave model is not listed in this manual and you require assistance in finding the correct part, please contact the seller or manufacturer with your microwave's full model number.