Tusitaiala mo le Tektronix T912 10 MHz Storage Oscilloscope

Folasaga

This document serves as the official instruction manual for the Tektronix T912 10 MHz Storage Oscilloscope. It provides comprehensive information regarding the setup, operation, maintenance, and troubleshooting of the instrument. Users are advised to read this manual thoroughly to ensure safe and efficient use of the Tektronix T912 oscilloscope.

Fa'amatalaga Saogalemu

Always observe the following safety precautions when operating the Tektronix T912 oscilloscope:

• Punavai Malosi: Connect the instrument only to a power source with the specified voltage and frequency. Ensure proper grounding.
• Savili: Aua le poloka avanoa e savili ai. E mana'omia lelei le fa'afefe o le ea e puipuia ai le vevela tele.
• Tulaga Siosiomaga: Operate the oscilloscope in a dry environment, away from moisture, dust, and extreme temperatures.
• Probes and Cables: Use only probes and cables designed for the instrument and rated for the voltages being measured.
• Au'aunaga: Refer all servicing to qualified service personnel. Do not attempt to open or repair the instrument yourself.
• Maualuga Voltage: Ia nofouta i le maualuga voltage hazards. Always disconnect power before making or changing connections, especially when dealing with high voltagu matagaluega.

Ua Umaview: The Instruction Manual

O lenei vaega o loʻo tuʻuina atu se faʻaopoopogaview of the physical instruction manual itself, which guides users through the operation of the Tektronix T912 10 MHz Storage Oscilloscope.

Figure 1: Front Cover of the Instruction Manual. This image displays the blue front cover of the Tektronix T912 10 MHz Storage Oscilloscope Instruction Manual. The Tektronix logo is prominently featured at the top, with "T912 10 MHz STORAGE OSCILLOSCOPE WITH OPTIONS" and "INSTRUCTION MANUAL" printed below. The manual is spiral-bound on the left side.

Figure 2: Inside Cover Page of the Instruction Manual. This image shows the inside cover page of the manual. It features the Tektronix logo with "COMMITTED TO EXCELLENCE" below it. Text prompts the user to "PLEASE CHECK FOR CHANGE INFORMATION AT THE REAR OF THIS MANUAL." Details about the T912 model, storage oscilloscope, and instruction manual are visible, along with Tektronix Inc. contact information, product group, serial number, and printing dates (First Printing JUL 1975, Revised JUL 1982).

Figure 3: Back Cover of the Instruction Manual. This image displays the plain blue back cover of the spiral-bound instruction manual. It matches the front cover's color and texture, showing the spiral binding along the left edge.

Seti

Proper setup is crucial for accurate measurements and safe operation. Follow these general steps:

1. Tatalaina: Carefully remove the oscilloscope and all accessories from its packaging. Inspect for any signs of shipping damage.
2. Tu'uga: Place the oscilloscope on a stable, level surface with adequate ventilation space around it.
3. So'oga Malosi: Connect the power cord to the instrument and then to a grounded AC power outlet matching the specified voltage.
4. So'oga su'esu'e: Connect the desired probes to the input channels. Ensure probes are properly compensated before use.
5. Malosiaga Muamua Ki: Turn on the oscilloscope and allow it to warm up for a few minutes as per the specific instructions in the full manual.

Fa'atonuga o Galuega

The Tektronix T912 is a 10 MHz storage oscilloscope designed for capturing and displaying waveforms. Basic operation involves:

• Malosi/Pepe: Use the main power switch to turn the unit on or off.
• Pulega Fa'atulagaina: Adjust the VOLTS/DIV knob for each channel to set the vertical sensitivity. Use the POSITION knob to move the waveform vertically.
• Pulega Faalava: Adjust the SEC/DIV knob to set the time base. Use the POSITION knob to move the waveform horizontally.
• Fa'aoso: Set the TRIGGER LEVEL and SOURCE to stabilize the waveform display. The T912, being a storage oscilloscope, allows for capturing single-shot events.
• Galuega Teuina: Utilize the storage controls to capture and hold transient or non-repetitive waveforms on the screen for detailed analysis. Refer to the full manual for specific storage mode operations.
• Focus and Intensity: Adjust these controls for a clear and bright display.

Tausiga

Regular maintenance ensures the longevity and performance of your oscilloscope:

• Fa'amamaina: Ta'e le paoa a'o le'i fa'amama. Fa'aaogā se mea vaivai, oamp cloth with a mild detergent to clean the exterior. Avoid abrasive cleaners or solvents.
• Teuina: When not in use, store the oscilloscope in a clean, dry environment, protected from dust and extreme temperatures.
• Fa'avasegaina: Periodically, the oscilloscope may require calibration to maintain accuracy. Refer to the detailed calibration procedures in the complete service manual or contact qualified service personnel.
• Tausiga Su'esu'e: Inspect probes regularly for damage. Keep probe tips clean.

Fa'afitauli

If you encounter issues with your Tektronix T912, consider the following common troubleshooting steps:

• Leai se fa'aaliga:
  • Check power connection and fuse.
  • Ensure intensity and focus controls are not set to minimum.
  • Verify that the oscilloscope is powered on.
• Unstable Waveform:
  • Adjust the trigger level and source settings.
  • Check probe connections and compensation.
  • Ensure the input signal is within the oscilloscope's measurement range.
• Leai se Fa'ailoga Fa'aalia:
  • Verify the input signal is present at the probe tip.
  • Check channel selection and vertical position.
  • Ensure the probe is correctly connected to the circuit under test.
• Faiga o le Galu Fa'api'opi'o:
  • Check probe compensation.
  • Ia mautinoa le faailoilo amplitude does not exceed the vertical range.
  • Verify the signal frequency is within the oscilloscope's bandwidth.

For more detailed troubleshooting, consult the complete instruction manual or contact Tektronix support.

Fa'amatalaga

The following specifications apply to the Tektronix T912 10 MHz Storage Oscilloscope:

Note: Some specifications like "Compatible Devices" and "Graphics Card Interface" are derived from the product listing and may refer to specific configurations or accessories. For detailed technical specifications, refer to the original Tektronix T912 service manual.

Fa'amaonia ma Lagolago

For warranty information, please refer to the documentation provided at the time of purchase or contact the seller (ROA) or the manufacturer (Tektronix) directly. Support resources, including technical assistance and service options, can typically be found on the official Tektronix webnofoaga po'o le fa'afeso'ota'i le latou matagaluega o auaunaga.

Tektronix, Inc.
Pusa meli 500
Beaverton, Oregon 97077

First Printing JUL 1975
Revised JUL 1982