Folasaga
Thank you for choosing the ENEGON NB-6L Replacement Battery and Charger Kit. This kit provides reliable power solutions for your compatible Canon cameras, ensuring you capture every moment without interruption. This manual will guide you through the proper use and care of your new battery and charger kit.
The ENEGON NB-6L batteries are designed to be fully compatible with Canon NB-6L and NB-6LH batteries, offering a high capacity of 1300mAh for extended use. The included charger provides convenient charging options from various power sources.
O mea o lo'o i totonu
Fa'amolemole fa'amautinoa o lo'o iai mea uma i lau afifi:
- 2 x ENEGON NB-6L Replacement Batteries
- 1 x USB Charger maa
- 1 x Uaea Micro-USB
Image: The ENEGON NB-6L Battery and Charger Kit, showing two batteries, the charger, and a micro-USB cable.
Fegalegaleaiga
The ENEGON NB-6L batteries and charger are compatible with a wide range of Canon cameras that use NB-6L or NB-6LH batteries, including but not limited to:
- Canon PowerShot D10, D20, D30
- Canon PowerShot ELPH 500 HS
- Canon PowerShot S90, S95, S120
- Canon PowerShot SD770 IS, SD980 IS, SD1200 IS, SD1300 IS, SD3500 IS, SD4000 IS
- Canon PowerShot SX170 IS, SX240 HS, SX260 HS, SX270 HS, SX280 HS
- Canon PowerShot SX500 IS, SX510 HS, SX520 HS, SX530 HS, SX540 HS, SX600 HS, SX610 HS, SX700 HS, SX710 HS
Image: A visual representation of various Canon PowerShot camera models compatible with the ENEGON NB-6L battery.
Seti ma Totogi
Follow these steps to set up and charge your ENEGON NB-6L batteries:
- Fa'aofi maa: Carefully insert the ENEGON NB-6L battery into the charger slot. Ensure the battery is oriented correctly, aligning the contacts on the battery with the pins in the charger.
- Fesoʻotaʻi le Mana: Connect the Micro-USB cable to the charger's Micro-USB input port. Then, connect the other end of the USB cable to a compatible USB power source. This can be a wall charger adapter (not included), a car charger (not included), a power bank (not included), or a computer's USB port.
- Mata'itu Totogi: The LED indicator on the charger will show the charging status. When the charger is powered on without a battery, the LED light is green. During charging, the LED light will turn RED. Once the battery is fully charged, the LED light will turn GREEN again.
Image: A four-step visual guide demonstrating how to insert the battery into the charger and connect it to a power source.
Image: Illustration showing the correct and incorrect way to insert the battery, and the corresponding LED indicator colors (red for charging, green for fully charged).
Image: A diagram illustrating various power sources that can be used to charge the battery, including car charger, wall charger, PC, and power bank.
Operating the Batteries
Once charged, the ENEGON NB-6L batteries are ready for use in your compatible Canon camera. Simply insert the charged battery into your camera's battery compartment according to your camera's instruction manual.
The high capacity of 1300mAh provides extended shooting time, allowing you to capture more photos and record longer videos. Always carry a spare charged battery to ensure you don't miss any important moments.
Image: A photographer capturing a sunset scene, with ENEGON batteries in the foreground, symbolizing extended power for photography.
Tausiga ma le Saogalemu
To ensure the longevity and safe operation of your ENEGON NB-6L batteries and charger, please observe the following guidelines:
- Teu maa i se nofoaga mālūlū ma matutu mamao ese mai le susulu o le la ma le vevela tele.
- Do not disassemble, crush, or puncture the batteries.
- Avoid exposing batteries to water or fire.
- Use only the provided ENEGON charger or a compatible charger designed for NB-6L batteries.
- If a battery shows signs of damage, swelling, or leakage, discontinue use immediately and dispose of it properly.
- The charger features built-in multi-circuit protection against overcharge, short-circuit, high temperature, and overvoltage. It is also constructed with fire-resistant materials for enhanced safety.
- Clean the battery contacts and charger pins periodically with a dry, soft cloth to ensure optimal connection.
Fa'afitauli
If you encounter issues with your ENEGON NB-6L Battery and Charger Kit, please refer to the following common problems and solutions:
| Fa'afitauli | Mafuaaga e ono tupu | Fofo |
|---|---|---|
| Le ma'a e le'o fa'atauina | Incorrect battery insertion; Faulty cable/power source; Dirty contacts. | Ensure battery is inserted correctly (LED should turn RED). Try a different USB cable or power adapter. Clean battery and charger contacts. |
| Charger LED remains green with battery inserted | Battery already fully charged; Incorrect battery insertion; Charger malfunction. | If battery is not fully charged, re-insert it correctly. If issue persists, contact customer support. |
| Battery drains quickly in camera | Battery not fully charged; High power consumption by camera; Battery aging. | Ensure battery is fully charged (LED turns GREEN). Reduce camera features that consume high power (e.g., flash, continuous video). Consider replacing older batteries. |
Fa'amatalaga
| Fa'aaliga | Fa'amatalaga |
|---|---|
| Fa'ailoga | ENEGON |
| Igoa Fa'ata'ita'iga | NB-6L |
| Ituaiga maa | Lithium-ion |
| Fa'atulagaina o le ma'a | Lithium-ion |
| Malosiaga ma'a | 1300mAh |
| Voltage | 3.7 Volts |
| Numera o maa | 2 (aofia ai) |
| mamafa o le maa | 15 kalama |
| Toe fa'aaogaina | Toe fa'aaogaina |
| Masini Fegalegaleai | Canon cameras (e.g., PowerShot series, ELPH 500 HS) |
Fa'amaonia ma Lagolago
ENEGON provides an 18-month manufacturer warranty for this product. In case of any issues or questions, please contact ENEGON customer service. We are committed to providing 24-hour customer support to ensure your satisfaction.
For further assistance, please visit the official ENEGON brand store: ENEGON Brand Store
