ASTRALPOOL Aster 99 Sand Filter ma le Valve Ø 600 Tusitaiala mo Fa'atonuga

1. Folasaga

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your ASTRALPOOL Aster 99 Sand Filter with Valve Ø 600. Please read these instructions thoroughly before attempting to install or operate the filter. Retain this manual for future reference.

1.1. Fa'amatalaga Saogalemu

• Ia tape ese le eletise mai le pamu a'o le'i faia se tausiga po'o se tautua.
• Ia mautinoa o feso'ota'iga uma o lo'o malupuipuia ma fa'afefe vai e puipuia ai le liki.
• Do not operate the filter if any part is damaged or missing.
• Keep children away from the filtration system during operation and maintenance.
• Fa'afeso'ota'i se tagata tomai faapitoa mo le fa'apipi'iina pe afai e te le o mautinoa i so'o se la'asaga.

2. Oloa Ua Ovaview ma Vaega

The ASTRALPOOL Aster 99 Sand Filter is designed for efficient swimming pool water filtration. It consists of a durable filter tank and a multi-port valve that controls the water flow through the system.

Ata 1: ASTRALPOOL Aster 99 Sand Filter and Multi-port Valve. The image displays the main filter tank, which is a large, white, spherical unit, alongside a separate black multi-port valve with a handle, used for directing water flow.

2.1. Vaega Autu:

• Tane Filter: The main body where the filter media (sand) is contained.
• Multi-port Valve: Controls the operational modes of the filter (e.g., filter, backwash, rinse).
• Fua Fa'amau: Indicates the internal pressure of the filter, crucial for determining when backwashing is needed.
• Fa'amama Fa'amama: Located at the bottom of the tank for draining water.

3. Fa'amatalaga

Understanding the dimensions and characteristics of your filter is important for proper installation and maintenance.

Ata 2: Dimensional diagram of the ASTRALPOOL Aster Sand Filter. This diagram illustrates the filter's height (H), diameter (D), and the positions of the inlet/outlet ports (M, N, K) with a corresponding table showing values for different filter sizes (Ø 500, 600, 750).

3.1. General Specifications for Ø 600 Model:

• Diamita (D): 600 mm
• Maualuluga (H): 900 mm
• Port M (Height from base): 455 mm
• Port N (Height from base): 330 mm
• Port K (Connection Size): 1 1/2"

3.2. Additional Product Information:

• ASIN: B079L868QJ
• Aso Muamua Maua: Aperila 29, 2025
• Avanoa mea fa'apitoa: E le maua fa'amatalaga.

4. Seti ma Fa'apipi'i

Proper installation is crucial for the filter's performance and longevity. Follow these steps carefully.

4.1. Filifiliga Nofoaga

• Place the filter on a firm, level surface, preferably concrete, to prevent settling.
• Ensure adequate ventilation and protection from direct sunlight and freezing temperatures.
• Allow sufficient space around the filter for maintenance and service.

4.2. Filling with Filter Media (Sand)

1. Ensure the internal standpipe and laterals are properly assembled and secured.
2. Place a plastic bag or cover over the standpipe opening to prevent sand from entering.
3. Carefully pour the recommended amount and grade of filter sand into the tank.
4. Remove the plastic bag/cover and ensure no sand has entered the standpipe.

4.3. Multi-port Valve Installation

1. Carefully place the multi-port valve onto the filter tank, aligning the standpipe with the valve's opening.
2. Secure the valve to the tank using the provided clamp or bolts, ensuring a tight seal.
3. Connect the plumbing from the pump to the "PUMP" port on the valve.
4. Connect the plumbing to the pool return lines to the "RETURN" port on the valve.
5. Connect a waste line to the "WASTE" port on the valve, directing water to an appropriate drainage area.
6. Install the pressure gauge into the designated port on the valve.

5. Fa'atonuga o Galuega

The multi-port valve controls the filter's functions. Always turn off the pump before changing the valve position to prevent damage.

5.1. Multi-port Valve Positions

• FILI: Normal filtering mode. Water flows through the sand, is cleaned, and returned to the pool.
• TAPU I tua: Cleans the filter sand. Water flows in reverse, flushing trapped debris out the waste line.
• Fufulu: Used after backwashing to settle the sand and flush any remaining dirty water to waste before returning to FILTER mode.
• WASTE/DRAIN: Bypasses the filter, sending water directly from the pool to the waste line. Useful for vacuuming heavy debris or lowering pool water level.
• FA'ATA'U: Bypasses the filter, circulating water directly back to the pool. Useful for chemical distribution without filtering.
• TATAU: Shuts off all flow to the filter. Use for servicing the pump or filter.

5.2. Initial Startup (First Backwash)

1. Ensure the pool is filled to the proper level and all plumbing connections are secure.
2. Seti le valve tele-port i le TULU.
3. Turn on the pump. Backwash for 2-3 minutes, or until the water in the sight glass (if present) runs clear.
4. Tape le pamu.
5. Seti le valve tele-port i le Fufulu.
6. Fa'aola le pamu. Fufulu mo le 30-60 sekone.
7. Tape le pamu.
8. Seti le valve tele-port i le FILI.
9. Turn on the pump. Note the initial pressure gauge reading; this is your clean filter pressure.

6. Tausiga

Regular maintenance ensures optimal performance and extends the life of your filter.

6.1. Backwashing

Backwash the filter when the pressure gauge reading is 8-10 PSI (0.5-0.7 bar) above the clean filter pressure, or when pool water clarity decreases. Follow the steps outlined in "5.2. Initial Startup (First Backwash)" for each backwash cycle.

6.2. Winterization (if applicable)

1. Tape le pamu ma tape le eletise.
2. Seti le valve tele-port i le TAUMULU (if available) or an intermediate position between two settings to relieve pressure on the gasket.
3. Remove the drain plug at the bottom of the filter tank to completely drain all water.
4. Disconnect all plumbing lines and store them in a dry, frost-free area.
5. Remove the pressure gauge and store it indoors.
6. Cover the filter to protect it from elements.

7. Faʻafitauli

This section addresses common issues you might encounter with your sand filter.

8. Fa'amaonia ma Lagolago

Specific warranty details for the ASTRALPOOL Aster 99 Sand Filter with Valve Ø 600 are not provided within this manual. For warranty claims, technical support, or to inquire about spare parts, please contact your authorized ASTRALPOOL dealer or the manufacturer directly. Please have your product model and purchase date available when contacting support.

O le ASIN for this product is B079L868QJ.