Digitus DN-95117 24-Port Gigabit PoE+ Injector User Manual

1. Folasaga

The Digitus DN-95117 is a high-performance 24-port 10G PoE+ Mid-Span hub, also known as a PoE injector. This device is designed to simplify network infrastructure by providing both data connectivity and electrical power to compatible devices over standard Ethernet cables. It features 24 input ports for data and 24 output ports that deliver both data and Power over Ethernet (PoE).

Each PoE output port supports devices compliant with IEEE802.3af (15.4 W) and IEEE802.3at (30 W) standards, making it suitable for powering various network devices such as PoE-enabled access points, IP phones, and IP cameras. The injector offers a robust maximum total power budget of 370 W across all ports, with a maximum of 30 W available per individual port.

2. Mea i totonu o le afifi

Fa'amolemole ia fa'amaonia o mea uma o lo'o lisiina i lalo o lo'o aofia i lau afifi. Afai e misi pe fa'aleagaina ni mea, fa'amolemole fa'afeso'ota'i lau fa'atau'oloa.

• 1 x 24-port 10G PoE+ Injector (Digitus DN-95117)
• 1 x Ta'iala Amata vave
• 1 x Uaea Malosi
• Mounting Accessories (e.g., rack-mount brackets, screws, rubber feet)

Image 2.1: The Digitus DN-95117 PoE+ Injector shown with its power cable and mounting accessories.

3. Oloa Ua Ovaview

The Digitus DN-95117 is designed for efficient and reliable power and data delivery in network environments. Its robust construction and comprehensive features ensure stable operation for various applications.

3.1 Vaega Autu

• 24-Port 10G Ethernet PoE+ Injector: Provides 24 data input ports and 24 data+PoE output ports.
• High Power Budget: Offers a total power budget of 370 Watts, with up to 30 Watts per port.
• Tausiga masani: Fully compatible with IEEE802.3af and IEEE802.3at PoE standards.
• Otometi Su'esu'ega: Features auto-MDI/MDI-X for cable detection and auto-detection of full-duplex/half-duplex modes.
• Puipuiga Si'i: Includes automatic surge protection for enhanced device safety.
• Fa'agaioiga Malosiaga: Designed for optimized power consumption.
• Fa'apipi'i ma ta'alo: Faiga fa'apipi'i faigofie.

Ata 3.1: Ua umaview of the Digitus DN-95117 highlighting its key features such as 10 Gbps support, 100m transmission range, and 370 Watt PoE power budget.

3.2 Port Layout and Dimensions

The device features 24 data input ports and 24 data+PoE output ports on its front panel. The rear panel includes the power input socket and a power switch.

Ata 3.2: Auiliiliga view of the Digitus DN-95117, illustrating the front panel with 24 data input and 24 data+PoE output ports, the rear panel with the power input socket, and overall dimensions (440mm L x 345mm W x 45mm H).

Ata 3.3: Tua view of the Digitus DN-95117 showing the power input socket and power switch.

4. Fa'atonu Fa'atonu

Follow these steps to set up your Digitus DN-95117 PoE+ Injector:

1. Tatala le masini: Carefully remove the PoE+ injector and all accessories from the packaging.
2. Filifili se nofoaga: Select a stable, well-ventilated location for the injector. Ensure it is away from direct sunlight, heat sources, and moisture. The device can be rack-mounted using the included accessories or placed on a flat surface.
3. Connect Data Input: Connect your non-PoE network switch or router to the 24 data input ports on the front panel using standard Ethernet cables.
4. Feso'ota'i le PoE Output: Connect your PoE-enabled devices (e.g., IP cameras, wireless access points, VoIP phones) to the 24 data+PoE output ports on the front panel using Ethernet cables. These cables will carry both data and power to your devices.
5. Fesoʻotaʻi le Mana: Connect the provided power cable to the power input socket on the rear panel of the injector, then plug the other end into a standard AC power outlet (100VAC ~ 240VAC).
6. Malosiaga: Flip the power switch on the rear panel to the 'ON' position. The device will power on, and indicator lights on the front panel will illuminate to show status.
7. Fa'amaonia So'oga: Check the status indicators for each connected port to ensure proper data and PoE connectivity to your devices.

Image 4.1: The Digitus DN-95117 can be integrated into various network setups, connecting a non-PoE switch to multiple PoE-powered devices.

5. Fa'atonuga o Galuega

Once the Digitus DN-95117 is set up, its operation is largely automatic. The device functions as a transparent data and power injector.

• Automatic PoE Detection: The injector automatically detects if a connected device is PoE-compatible and provides the appropriate power (IEEE802.3af or IEEE802.3at).
• Tuuina atu o Faamatalaga: Data is passed through the injector at Gigabit speeds (10/100/1000Mbps/2.5/10G) without modification.
• Tulaga Faʻaalia: Observe the LED indicators on the front panel for each port. These indicators typically show link status, activity, and PoE power status. Refer to the Quick Start Guide for specific LED behavior.
• Power Budget Management: The injector manages the total 370W power budget. If the total power demand from connected devices exceeds this budget, the injector may prioritize power delivery or shut down power to lower-priority ports. Ensure your total power consumption does not exceed 370W.

Image 5.1: The Digitus DN-95117 facilitates high-speed 10 Gbps data and power delivery to various network devices.

6. Tausiga

The Digitus DN-95117 is designed for minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

• Fa'amamaina: Keep the device clean and free from dust. Use a soft, dry cloth for cleaning. Do not use liquid or aerosol cleaners.
• Savili: Ensure that the ventilation openings are not blocked. Proper airflow is crucial for heat dissipation.
• Pulega o uaea: Organize network cables to prevent strain on ports and ensure good airflow around the device.
• Faʻalauiloa Firmware: Periodically check the Digitus website for any available firmware updates. Follow the instructions provided with the update carefully.

7. Faʻafitauli

If you encounter issues with your Digitus DN-95117, refer to the following common troubleshooting steps:

• Leai se Malosi:
  • Ensure the power cable is securely connected to both the injector and the power outlet.
  • Verify the power switch on the rear panel is in the 'ON' position.
  • Siaki le palaka eletise i se isi masini e faʻamaonia ai pe o galue lelei.
• No Data Connection:
  • Check all Ethernet cable connections between the source device, the injector's input ports, and the destination device.
  • Ensure the Ethernet cables are not damaged and are correctly terminated.
  • Verify the network devices connected to the injector are functioning correctly.
• No PoE Power to Device:
  • Confirm the connected device is PoE-compatible (IEEE802.3af or IEEE802.3at).
  • Check the PoE status LED for the specific port on the injector.
  • Ensure the total power consumption of all connected PoE devices does not exceed the 370W budget. Disconnect some devices if necessary to test.
  • Taumafai se isi uaea Ethernet.
• Telegese le Saosaoa Feso'otaiga:
  • Ensure all connected devices and cables support Gigabit Ethernet speeds.
  • Check for network congestion or issues with other network components.

If problems persist after following these steps, please contact Digitus technical support.

8. Fa'amatalaga

9. Fa'amaonia ma Lagolago

DIGITUS products are known for their high quality and reliability. This product comes with a 1 tausaga fa'amaonia for spare parts availability.

For technical support, product information, or warranty claims, please visit the official DIGITUS website or contact your local distributor. You can find more solutions and information at the following link:

DIGITUS Solutions Overview

Image 9.1: DIGITUS brand information and link to solutions.