Tusi Taiala

1. Folasaga

Fa'afetai mo le fa'atauasing the Project Source 2-Pack 13-inch Bronze Flush Mount Light fixtures. These fixtures are designed to provide ambient lighting with a traditional aesthetic, featuring a durable bronze finish and an elegant alabaster glass shade. They are suitable for various indoor spaces, including bathrooms, bedrooms, kitchens, dining rooms, and living rooms, enhancing the decor while providing reliable illumination.

Ata 1: Two Project Source 13-inch Bronze Flush Mount Light fixtures. Each fixture features a round bronze base and a dome-shaped alabaster glass shade, secured by a small finial at the bottom center of the shade.

2. Fa'amatalaga Taua mo le Saogalemu

LAPATA'IGA: Lamatiaga o le Te'i Eletise. Motusi le eletise i le pusa fiusi po'o le circuit breaker a'o le'i fa'apipi'iina pe fa'aleleia.

• Faitau fa'atonuga uma ma le fa'aeteete a'o le'i amata fa'apipi'i.
• E tatau ona ogatasi uma feso'ota'iga eletise ma tulafono fa'alotoifale, tulafono fa'atonutonu, po'o le Tulafono Fa'ale-Atunu'u o Eletise (NEC). Fa'afeso'ota'i se tagata eletise agavaa pe afai e te le masani i feso'ota'iga lelei o uaea eletise.
• Use only UL-listed wire connectors for the electrical connections.
• Aua le sili atu le maualuga wattage specified for this fixture (14 Watts per bulb).
• Wear safety glasses and appropriate protective gear during installation.
• Ia mautinoa o loʻo faʻavae lelei le mea faʻapipiʻi.

3. Mea i totonu o le afifi

Fa'amautinoa o lo'o iai vaega uma a'o le'i amata fa'apipi'i:

• 2 x 13-inch Bronze Flush Mount Light Fixtures (with alabaster glass shades)
• Mounting Hardware (screws, wire nuts, mounting bracket)
• Note: Light bulbs are NOT included.

4. Fa'amatalaga

5. Seti ma Fa'apipi'i

Meafaigaluega Manaomia: Phillips head screwdriver, flathead screwdriver, wire strippers, electrical tape, safety glasses.

Laasaga a'o le'i fa'apipi'i:

1. tape le paoa: Locate the circuit breaker or fuse box that supplies power to the light fixture location. Turn off the power completely before proceeding.
2. Saunia le eria: Clear the work area and ensure you have stable footing if using a ladder.
3. Tatala: Carefully remove the fixture and all components from the packaging.

Laasaga fa'apipi'i:

1. Fa'apipi'i Fa'amau Fa'amau: Secure the mounting bracket (included) to the electrical junction box in the ceiling using the provided screws. Ensure it is firmly attached.
2. Feso'ota'i Uaea eletise:
   • Fa'afeso'ota'i le lanu uliuli (hot) wire from the ceiling to the lanu uliuli wire of the fixture using a wire nut.
   • Fa'afeso'ota'i le lanu pa'epa'e (neutral) wire from the ceiling to the lanu pa'epa'e wire of the fixture using a wire nut.
   • Fa'afeso'ota'i le eleele wire (bare copper or green) from the ceiling to the eleele wire of the fixture (or the ground screw on the mounting bracket) using a wire nut or by wrapping it securely around the screw.
   Ia mautinoa o feso'ota'iga uma e mautu ma lelei. Afifi le lipine eletise i nati uaea mo se fa'aopoopoga o le puipuiga.
3. Secure Fixture to Mounting Bracket: Carefully push the wired fixture up towards the ceiling, aligning the holes in the fixture base with the screws on the mounting bracket. Secure the fixture in place with the decorative nuts or screws provided.
4. Fa'apipi'i matauila: Insert the recommended A15 shape, E-26 medium base light bulbs (not included) into the sockets. Do not exceed 14 Watts per bulb.
5. Fa'apipi'i le Paolo Tioata: Carefully place the alabaster glass shade onto the fixture. Secure it in place using the finial or retaining ring provided, tightening it gently until snug. Do not overtighten.
6. Faʻafoʻi Mana: A mae'a le fa'apipi'iina ma fa'amautu uma feso'ota'iga, toe fa'afo'i le eletise i le ta'avale ta'avale.

6. Fa'atonuga o Galuega

Once the Project Source Flush Mount Light fixtures are correctly installed and power is restored, they can be operated using the standard wall switch connected to the circuit. Simply toggle the wall switch to turn the lights on or off.

7. Tausiga ma Tausiga

Regular cleaning will help maintain the appearance and performance of your light fixtures.

• Cleaning the Fixture: Dust the bronze finish regularly with a soft, dry cloth. For more thorough cleaning, wipe the bronze finish with a damp cloth and a mild, non-abrasive soap solution, then dry immediately with a clean, soft cloth to prevent water spots.
• Cleaning the Glass Shade: The alabaster glass shade can be removed for cleaning. Wash it with mild soap and water, then rinse thoroughly and dry completely before reattaching to the fixture.
• Suiga maupulu: Always ensure the power is turned off at the circuit breaker and the bulbs have cooled down before attempting to replace them. Use only bulbs that meet the specified wattage ma le ituaiga faavae.
• Do not use abrasive cleaners, solvents, or polishes on any part of the fixture, as they may damage the finish or glass.

8. Faʻafitauli

Afai e te feagai ma faʻafitauli i lau moli, tagaʻi i faʻafitauli masani nei ma fofo:

• E le kilia le moli:
  • Check that the power supply is on at the circuit breaker.
  • Ensure the light bulbs are correctly installed and are not burnt out. Try replacing with a known working bulb.
  • Verify that all wire connections (black to black, white to white, ground) are secure and properly connected.
• Emo le malamalama:
  • Ensure the light bulbs are fully tightened in their sockets.
  • Check for any loose wire connections within the fixture or junction box.
  • Confirm that the bulbs used are compatible with the fixture and are not exceeding the maximum wattage.
• Glass shade is loose or wobbles:
  • Gently tighten the finial or retaining ring that secures the glass shade. Do not overtighten.

If the problem persists after attempting these solutions, please consult a qualified electrician or contact customer support.

9. Fa'amaonia ma le Fesoasoani mo Tagata Fa'atau

For detailed warranty information regarding your Project Source 2-Pack 13-in W Bronze Flush Mount Light, please refer to the documentation included with your original purchase. Warranty terms typically cover defects in materials and workmanship for a specified period.

If you require technical assistance, have questions about installation, or need to report a defect, please contact Project Source customer service directly through their official website or the contact information provided in your product packaging. Please have your model number (40804) and purchase details ready when contacting support.