1. Folasaga
This manual provides detailed instructions for the installation, operation, and maintenance of your Trust IPCAM-2000 Wi-Fi IP Surveillance Camera. Please read this manual thoroughly before using the product to ensure correct setup and optimal performance. Keep this manual for future reference.
2. Mea i totonu o le afifi
Fa'amautinoa o lo'o iai mea uma i totonu o le afifi:
- Trust IPCAM-2000 Wi-Fi IP Surveillance Camera
- Fetuunaiga Malosi
- Fa'amau Fa'amau ma Siu
- Tusi Lesona a le Tagata (lenei pepa)
3. Oloa Ua Ovaview
Familiarize yourself with the various components of your Trust IPCAM-2000 camera.
Ata 3.1: Luma View. This image shows the front of the Trust IPCAM-2000 camera, highlighting the camera lens and the integrated light sensor for automatic night vision activation.
Ata 3.2: Itu View with Micro SD Card Slot. This image displays the side of the camera, clearly showing the slot for a Micro SD card, which is used for local video storage.
Ata 3.3: Tua View. This image illustrates the back of the camera, featuring the 5V-1.0A power input port, the reset button, and the integrated speaker for two-way audio communication.
Vaega Autu:
- Mata tioata: Pu'eina le vitio footage. Features a wide-angle lens for optimal viewing.
- Infrared LEDs: Provide night vision capabilities for clear images in low-light conditions.
- Laiti Laiti Card SD: Supports Micro SD cards up to 64GB for local video recording.
- Power Input (5V-1.0A): Fa'afeso'ota'i i le fa'apipi'i eletise o lo'o aofia ai.
- Toe Seti ki: Used to restore the camera to factory default settings.
- Tu'ufa'atasia le Fofoga Fetalai: Enables two-way audio communication.
- Fa'amauina: Allows for placement on a flat surface or wall mounting.
4. Seti ma Fa'apipi'i
4.1. Filifilia o se Nofoaga
Select an indoor location within range of your Wi-Fi network. Ensure the camera has a clear line of sight to the area you wish to monitor. Avoid placing the camera near heat sources or in direct sunlight.
4.2. Fa'aola ile Meapueata
- Connect the power adapter to the camera's 5V-1.0A power input port.
- Fa'afeso'ota'i le feso'ota'iga eletise i se pa puipui.
- The camera will power on, and an indicator light will show its status (refer to the app for specific light indications during setup).
4.3. Fa'apipi'iina o le Mea Pu'eata (Filifiliga)
The camera can be placed on a flat surface or mounted to a wall using the included bracket and screws. Ensure the mounting surface is stable and can support the camera's weight.
- Fa'apipi'i le fa'amau fa'apipi'i i le nofoaga e mana'omia e fa'aaoga ai sikulima ua tu'uina atu.
- Secure the camera to the mounting bracket.
- Fetuuna'i le pito meapueata pe a mana'omia.
5. App Installation and Configuration
The Trust IPCAM-2000 camera is controlled via a dedicated mobile application.
- La'u mai le App: Saili mo the "Trust Smart Home" app (or specified app in product packaging) on the Apple App Store (for iOS devices) or Google Play Store (for Android devices).
- Fa'apipi'i ma Tatala: Install the app and open it on your smartphone or tablet.
- Fausia Fa'amatalaga: Follow the on-screen instructions to create a new user account or log in if you already have one.
- Fa'aopoopo meapueata: Within the app, select the option to add a new device. Follow the in-app wizard for easy installation. This typically involves connecting your phone to the camera's temporary Wi-Fi network, then configuring the camera to connect to your home Wi-Fi network.
- Fa'ato'a Fa'atonu: Once the camera is successfully connected to your Wi-Fi, you can name the camera and access its live feed and settings.
Fa'aaliga: The app provides multi-language support and guides you through each step of the setup process.
6. Galuega
6.1. Ola View
After successful setup, open the app and select your camera to view the live video feed from anywhere with an internet connection.
6.2. Faaaliga i le po
The camera automatically switches to night vision mode in low-light conditions, utilizing its infrared LEDs to provide clear black and white video.
6.3. Leo e Lua Ala
Use the integrated speaker and microphone through the app to communicate with individuals near the camera.
- I le ola view, locate the microphone icon.
- Press and hold the icon to speak. Release to listen.
7. Fa'amaumauga ma le Teuina
7.1. Fa'apipi'iina o le Kata Micro SD
To enable local video recording, install a Micro SD card (up to 64GB, Class 10 recommended) into the designated slot on the side of the camera.
- Ensure the camera is powered off before inserting or removing the Micro SD card.
- Fa'aofi malie le Micro SD card i totonu o le avanoa seia o'o i totonu.
- Power on the camera. The app will prompt you to format the SD card if necessary.
7.2. Recording Options
The app allows you to configure recording settings, including continuous recording or event-triggered recording (e.g., motion detection). Recorded clips are stored on the Micro SD card and can be accessed via the app.
8. Iloa o Gaioiga ma Faasilasilaga
The camera features motion detection to alert you to activity in its field of view.
- Fa'agaoioia le Iloa o Gaioiga: Navigate to the camera settings within the app and enable motion detection.
- Fetuuna'i lagona: You can adjust the sensitivity level to minimize false alarms.
- Seti Fa'asilasilaga: Configure the app to send push notifications to your smartphone or tablet when motion is detected.
9. Tausiga
9.1. Fa'amamaina
To maintain optimal image quality, periodically clean the camera lens with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
9.2. Fa'afouga Firmware
Check the app regularly for available firmware updates. Keeping your camera's firmware up-to-date ensures the latest features, security enhancements, and bug fixes.
10. Faʻafitauli
| Fa'afitauli | Mafuaaga e ono tupu | Fofo |
|---|---|---|
| E le o feso'ota'i le meapueata i le Wi-Fi | Incorrect Wi-Fi password, camera too far from router, router issues. |
|
| No video feed in app | Camera offline, internet connection issues, app malfunction. |
|
| Le su'esu'eina o gaioi e le o galue | Motion detection disabled, sensitivity too low, app notifications off. |
|
| Micro SD card not recording | SD card full, corrupted, or not formatted correctly. |
|
11. Fa'amatalaga
| Igoa Fa'ata'ita'iga | IPCAM-2000 |
| Numera Fa'ata'ita'iga a le Faufale | 71119 |
| Tekinolosi Feso'ota'i | Uaealesi (Wi-Fi) |
| Punavai Malosi | Mea Fa'apipi'i AC (5V) |
| Sao Voltage | 5 Volts |
| Uatage | 5 Watts |
| Mea | palasitika |
| Lanu | Lanu pa'epa'e |
| Fua (L x W x H) | 9 x 7.8 x 12 cm |
| mamafa | 248 g |
| Fa'aoga Siosiomaga | I totonu |
| Fa'apitoa Fa'apitoa | Night Vision (Infrared), Two-Way Audio, Motion Detection, Micro SD Card Recording (up to 64GB) |
| Ituaiga Pule | Amazon Alexa (via app integration) |
| Ituaiga Fa'amau | Wall / Surface |
Note on Power Source: The camera is powered by the included 5V AC adapter and does not contain an internal battery for standalone operation.
12. Fa'amatalaga Saogalemu
- Fa'aaoga na'o le mea fa'apipi'i eletise ua tu'uina atu.
- Aua le fa'aalia le meapueata ile vai po'o le susu.
- Avoid placing the camera in direct sunlight or near heat sources.
- Aua le taumafai e tatala pe toe faaleleia le meapueata oe lava. Faafesootaʻi le vaega lagolago mo se fesoasoani.
- Taofi le meapueata ma ana mea fa'aoga mai le a'afia o tamaiti.
13. Fa'amaonia ma Lagolago
For warranty information, technical support, or further assistance, please refer to the official Trust website or contact their customer service department. Details can typically be found on the product packaging or on the manufacturer's webnofoaga.
Punaoa i luga ole laiga: www.trust.com
