1. Folasaga
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Legrand LEG97605 300W Non-Flush Rotary Dimmer Switch. Please read this manual thoroughly before installation and use, and retain it for future reference.
The Legrand LEG97605 is a 300W dimmer switch designed for surface mounting, featuring a rotary button for light intensity control and an integrated push-button for ON/OFF functionality. It is suitable for 1-way circuit applications.
Ata 1: Luma view of the Legrand LEG97605 Dimmer Switch.
2. Fa'amatalaga Taua mo le Saogalemu
WARNING: RISK OF ELECTRIC SHOCK. Always turn off power at the circuit breaker or fuse box before installing or servicing this device. Improper installation can result in serious injury or death.
- E tatau ona faia le faʻapipiʻiina e se eletise agavaa pe e tusa ai ma tulafono eletise a le lotoifale.
- Aua le sili atu le maualuga wattage fua faatatau o le 300W.
- Ia fa'amautinoa ua malupuipuia uma feso'ota'iga uaea ma fa'amama lelei.
- O lenei masini ua mamanuina mo na'o totonu.
- Do not use with incompatible load types (e.g., certain LED drivers, fluorescent fixtures) unless specified by the manufacturer.
3. Mea i totonu o le afifi
Fa'amautinoa o lo'o iai vaega uma a'o le'i amata fa'apipi'i:
- Legrand LEG97605 300W Non-Flush Rotary Dimmer Switch (1 unit)
- Mounting Screws (Quantity may vary)
- Tusi Taiala (Lenei pepa)
Figure 2: Legrand LEG97605 Dimmer Switch as packaged.
4. Fa'atonu Fa'atonu
Follow these steps carefully to install your dimmer switch:
- Tape Malosi: Locate the circuit breaker or fuse controlling the light fixture you intend to dim. Switch it to the OFF position. Verify power is off using a voltage su'e ae le'i fa'aauau.
- Saunia le nofoaga e fa'apipi'i ai: The LEG97605 is a non-flush, surface-mount dimmer. Choose a suitable wall location for mounting.
- Uaea:
- Identify the live (line) wire and the load wire (to the light fixture).
- Connect the incoming live wire to the terminal marked 'L' or 'Input' on the dimmer switch.
- Connect the wire going to the light fixture (load wire) to the terminal marked 'Load' or 'Output' on the dimmer switch.
- Ensure all connections are tight using the screw terminals.
- Fa'amauina: Secure the dimmer switch to the wall surface using the provided mounting screws. Ensure it is firmly attached and level.
- Faʻafoʻi Mana: Once installation is complete and all connections are secure, turn the power back on at the circuit breaker.
Ata 3: Luga view of the dimmer switch, illustrating potential wiring points.
5. Operating Your Dimmer Switch
The Legrand LEG97605 dimmer switch features a rotary knob for dimming and an integrated push-button for ON/OFF control.
- To Turn ON/OFF: Press the rotary knob firmly. You will hear a click, and the light will turn on or off.
- To Dim/Brighten: Rotate the knob clockwise to increase light intensity and counter-clockwise to decrease light intensity.
Ata 4: Fa'afagota view highlighting the rotary control knob.
6. Tausiga
Your Legrand dimmer switch requires minimal maintenance.
- Fa'amamaina: To clean the surface of the dimmer, wipe with a soft, damp ie. Aua ne'i fa'aogaina ni mea fa'amama, solvents, po'o ni vaila'au malosi, aua e mafai ona fa'aleagaina le fa'auma.
- Asiasiga: Ia siaki le ki i lea taimi ma lea taimi mo ni faʻailoga o le faʻaleagaina poʻo ni fesoʻotaʻiga ua malepelepe. Afai e maua ni faʻafitauli, tape le eletise ma faʻafesoʻotaʻi se tagata tomai faapitoa i le eletise.
7. Faʻafitauli
If you experience issues with your dimmer switch, refer to the following common problems and solutions:
| Fa'afitauli | Mafuaaga e ono tupu | Fofo |
|---|---|---|
| E le ola le moli. | Leai se mana i le ki; uaea sese. | Check circuit breaker/fuse. Verify wiring connections are correct and secure. |
| Light does not dim or dims poorly. | Incompatible bulb type; minimum load not met. | Ensure all connected bulbs are dimmable. Check if the total wattage of bulbs meets the dimmer's minimum load requirement (if any). |
| Emo moli po o le pisapisao. | Loose wiring connection; incompatible bulb type; electrical interference. | Turn off power and check all wire connections. Replace bulbs with high-quality dimmable types. Consult an electrician if problem persists. |
| Dimmer feels hot to the touch. | Overload or improper wiring. | Turn off power immediately. Verify total connected wattage does not exceed 300W. Consult a qualified electrician. |
If the problem persists after attempting these solutions, contact Legrand customer support or a qualified electrician.
8. Fa'amatalaga Fa'apitoa
| Fa'aaliga | Fa'amatalaga |
|---|---|
| Fa'ailoga | Legrand |
| Numera Fa'ata'ita'i | LEG97605 |
| Faiga Fa'agaioiga | L ON SAO |
| Fa'ailoga o lo'o iai nei | 10 Amps |
| Uatage | 300 Watts |
| Ituaiga Faafesootai | E masani ona tatala |
| Ituaiga Feso'ota'i | Siu |
| Terminal | Siu |
| Ituaiga Circuit | 1-auala |
| Ituaiga Actuator | Rotary |
| Ituaiga Pule | Oomi Faamau |
| Fa'afeso'ota'i Mea | Kopa |
| Fa'ailoga Fa'ava-o-malo Puipuiga | IP54 |
| Ituaiga Fa'amau | Mauga i luga |
| Lanu | Lanu pa'epa'e |
| Mea mamafa | 2.46 aunese |
| Aso Muamua Maua | Setema 25, 2015 |
9. Fa'amaonia ma le Fesoasoani mo Tagata Fa'atau
For warranty information, technical assistance, or to report a problem, please contact Legrand customer support. Refer to the official Legrand webnofoaga po'o le afifiina o oloa mo fa'amatalaga lata mai fa'afeso'ota'i.
Legrand Official Webnofoaga: www.legrand.us
