1. Folasaga
This manual provides essential information for the proper installation, operation, and maintenance of your Datalogic QuickScan Lite QW2100 Bar Code Reader. The QW2100 is an entry-level linear imager designed for reading long, truncated 1D bar codes, commonly found in retail, light industrial, document processing, and office environments. Its ergonomic design ensures user comfort during daily operations.
Please read this manual thoroughly before using the device to ensure safe and efficient operation.
2. Fa'amatalaga Saogalemu
Ia usitaʻi i puipuiga saogalemu nei e puipuia ai manuʻa ma faʻaleagaina ai le masini:
- Aua le fa'aalia le masini i le vevela tele, susū, po'o le susulu o le la.
- ʻAloʻese mai le pa'ū o le masini poʻo le tuʻuaia foʻi i ni paʻōga matuia.
- Aua le taumafai e tatala pe sui le masini. Ia faasino atu uma auaunaga i tagata agavaa.
- Keep the scanning window clean to ensure optimal performance.
- Use only Datalogic-approved accessories and power supplies.
3. Mea i totonu o le afifi
Fa'amautinoa o lo'o iai mea uma i totonu o le afifi:
- Datalogic QuickScan Lite QW2100 Bar Code Reader
- USB Cable (if USB interface model) or RS-232/Keyboard Wedge Cable
- Quick Start Guide (refer to this manual for full instructions)
- Optional: Stand (if purchased as a kit)
4. Oloa Ua Ovaview
The Datalogic QuickScan Lite QW2100 features a compact and ergonomic design for comfortable handheld use. Key components include:
- Va'aiga Fa'amalama: Emits the scan line and reads bar codes.
- Ki fa'aoso: Activates the scanning process.
- Fa'ailoga LED: Provides feedback on scanning status (e.g., successful read, error).
- Cable Connector Port: For connecting the interface cable.
5. Seti
Follow these steps to set up your QW2100 Bar Code Reader:
- Fa'afeso'ota'i le Uaea: Insert the appropriate interface cable (USB or RS-232/Keyboard Wedge) into the connector port at the base of the scanner. Ensure a secure connection.
- Fa'afeso'ota'i i le masini talimalo:
- Fa'aoga USB: Plug the USB connector into an available USB port on your computer or POS system. The operating system should automatically detect and install the necessary drivers.
- RS-232/Keyboard Wedge Interface: Connect the cable to the corresponding port on your host device. Configuration may be required using Datalogic Aladdin software or by scanning configuration bar codes (refer to the full programming manual for details).
- Malosiaga: The scanner typically powers on automatically once connected to the host device. The indicator LED may illuminate to confirm power.
- Optional Stand Setup: If using the optional stand, assemble it according to its instructions and place the scanner in the stand for hands-free operation.
For advanced configuration, such as changing symbologies or interface settings, refer to the Datalogic Aladdin Configuration Software or the comprehensive programming manual.
6. Fa'atonuga o Galuega
To scan a bar code with your QW2100 reader:
- Sini: Point the scanning window of the reader at the bar code you wish to scan.
- Fa'agaoioi: Press and hold the trigger button. A bright scan line will project from the scanning window.
- Va'ai: Position the scan line across the entire bar code. The QW2100 is designed for wide-angle scanning, making it effective for long or wide codes.
- Fa'amaoniga: Upon a successful read, the scanner will emit an audible beep (if enabled) and the indicator LED will flash. Release the trigger button.
For optimal performance, ensure the bar code is clean and not excessively creased or damaged. Adjust the distance between the scanner and the bar code for the best read.
7. Tausiga
Proper maintenance ensures the longevity and performance of your bar code reader:
- Cleaning the Scanning Window: Fa'aaogā se ie mālūlū e leai se liu oampened with a mild, non-abrasive cleaner (e.g., glass cleaner) to gently wipe the scanning window. Avoid harsh chemicals or abrasive materials that could scratch the surface.
- Fa'amama le Casing: Solo le pito i fafo iasing ma le malu, oamp ie.
- Su'ega uaea: Regularly check the interface cable for any signs of damage, fraying, or loose connections. Replace damaged cables immediately.
- Teuina: A le fa'aaogaina, teu le si'osi'omaga i se si'osi'omaga mama, matutu mamao ese mai le susulu o le la ma le vevela tele.
8. Faʻafitauli
| Fa'afitauli | Mafuaaga e ono tupu | Fofo |
|---|---|---|
| E le ola le masini siaki. | Cable not connected properly or host device not providing power. | Ensure the cable is securely connected to both the scanner and the host device. Try a different USB port or host device. |
| Scanner does not read bar codes. |
|
|
| Scanner reads intermittently. | Damaged cable or loose connection. | Check the cable for damage and ensure connections are secure. Replace cable if necessary. |
9. Fa'amatalaga
| Fa'aaliga | Fa'amatalaga |
|---|---|
| Numera Fa'ata'ita'i | QW2120-BK |
| Fa'ailoga | Datalogic |
| Tekinolosi Feso'ota'i | USB Cable (also available in RS-232/Keyboard Wedge) |
| Punavai Malosi | AC (via host device USB or external power supply for RS-232) |
| Fua Fa'ata | 400 siaki/sekona |
| Fua o Mea (L x W x H) | 6.69 x 2.56 x 2.76 inisi (17 x 6.5 x 7 cm) |
| Mea mamafa | 4.2 aunese |
| Lanu | Lanu uliuli |
| Fa'ailoga Lagolago | Most standard 1D bar codes (e.g., EAN/UPC, Code 39, Code 128, Interleaved 2 of 5, etc.) |
10. Fa'amaonia ma Lagolago
Datalogic products are designed and manufactured to the highest quality standards. For warranty information, please refer to the warranty card included with your product or visit the official Datalogic webnofoaga.
For technical support, product registration, or to download the latest drivers and software (such as Datalogic Aladdin Configuration Software), please visit the Datalogic support portal or contact your local Datalogic representative.
Webnofoaga: www.datalogic.com
