Stanley FATMAX FMHT0-62689 Ratchet Screwdriver with LED and 12 Bits User Manual

1. Folasaga

Thank you for choosing the Stanley FATMAX FMHT0-62689 Ratchet Screwdriver. This versatile tool is designed for efficient fastening and loosening of screws, featuring a robust ratchet mechanism, an integrated LED light for improved visibility, and a convenient storage system for 12 interchangeable bits. This manual provides essential information for safe operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your tool.

2. Fa'amatalaga Saogalemu

Always observe basic safety precautions when using hand tools to reduce the risk of injury. Read and understand all instructions before use.

• Wear appropriate personal protective equipment, such as safety glasses, when operating the tool.
• Tausia le fale faigaluega ia mama ma malamalama lelei. O nofoaga fa'ama'i pe pogisa e fa'alavelave ai.
• Aua le soona aapa. Ia tausia lelei tulagavae ma paleni i taimi uma.
• Ensure the bit is securely seated in the holder before applying torque.
• Do not use the tool for purposes other than its intended use.
• Taofi ese tamaiti ma tagata o loʻo tutu aʻo faʻaogaina le meafaigaluega.
• Teu le mea faigaluega i se nofoaga matutu, saogalemu e le mafai e tamaiti.

3. Mea i totonu o le afifi

Fa'amautinoa o lo'o iai mea uma pe a uma ona tatala:

• 1 x Stanley FATMAX Ratchet Screwdriver with LED
• 12 x Interchangeable Bits

4. Vaega o Oloa

• 40-Tooth Ratchet Mechanism: Provides high torque capacity and a fine 9-degree recovery angle for efficient fastening in tight spaces.
• 3 Ratchet Positions: Easily switch between screwing (forward), locking, and unscrewing (reverse) with a simple button press.
• Integrated LED System: A 3.5 lumen LED light illuminates the work area, powered by 3 easy-to-change AG3 batteries.
• Double Magnetic Bit Retention: Ensures secure attachment of the bit to the holder and the holder to the handle, preventing accidental dislodgement.
• Bi-Material Handle: Ergonomic grip for comfort and enhanced control during use.
• On-board Bit Storage: Conveniently stores the 12 included bits within the handle.

5. Seti

5.1. Inserting and Changing Bits

1. To access the bits, pull the end cap of the handle to reveal the bit storage cartridge.
2. Select the desired bit from the cartridge.
3. Insert the selected bit firmly into the magnetic bit holder at the end of the screwdriver shaft. The magnetic retention will secure the bit.
4. To store bits, place them back into the cartridge and push the cartridge firmly into the handle until it clicks into place.

Image: Accessing and storing bits within the screwdriver handle.

5.2. Activating the LED Light

The LED light is activated by pressing the red button located near the bit holder. Press once to turn on, press again to turn off.

Image: Close-up of the LED activation button and ratchet selector.

5.3. Changing LED Batteries

The LED light is powered by 3 AG3 batteries. To replace them:

1. Locate the protective part around the LED light assembly.
2. Carefully unscrew or unclip this part to access the battery compartment.
3. Remove the old AG3 batteries and insert new ones, ensuring correct polarity.
4. Reassemble the protective part securely.

6. Fa'atonuga o Galuega

6.1. Fa'aaogaina o le Fa'ainitaneti

The ratchet mechanism allows for continuous turning without repositioning the hand, increasing efficiency. The selector ring near the bit holder controls the ratchet direction.

Image: Ratchet mechanism selector.

• Forward (Screwing): Rotate the selector to the 'R' (Right) position for clockwise rotation. The screwdriver will engage when turning clockwise and freewheel when turning counter-clockwise.
• Reverse (Unscrewing): Rotate the selector to the 'L' (Left) position for counter-clockwise rotation. The screwdriver will engage when turning counter-clockwise and freewheel when turning clockwise.
• Loka: Rotate the selector to the 'O' (Off) or center position to lock the shaft. This converts the tool into a traditional fixed screwdriver for maximum torque or precise control.

6.2. Faaaogaina o le Moli LED

Press the red button on the screwdriver head to activate the LED light. This feature is useful for illuminating dark work areas, such as inside cabinets or under furniture, improving visibility and precision.

Image: Screwdriver LED light in use.

7. Tausiga

• Fa'amamaina: Wipe the screwdriver and bits with a clean, dry cloth after each use. Do not use harsh chemicals or abrasive cleaners.
• Teuina: Store the screwdriver and all bits in a dry environment to prevent rust and corrosion. Ensure bits are securely stored within the handle.
• Bit Condition: Regularly inspect bits for wear or damage. Replace worn bits to maintain optimal performance and prevent damage to fasteners.
• Suiga maa: Replace the AG3 batteries for the LED light as needed (refer to Section 5.3). Remove batteries if the tool will not be used for an extended period to prevent leakage.

8. Faʻafitauli

• Le moli LED e le o galue: Check if the batteries are correctly inserted and not depleted. Replace batteries if necessary (AG3 type).
• Bits Not Holding Securely: Ensure the bit is fully inserted into the magnetic holder. Clean any debris from the bit holder or bit shank that might interfere with the magnetic connection.
• Ratchet Mechanism Sticking: Ensure the selector ring is fully engaged in one of the three positions (forward, reverse, or locked). Clean any dust or debris from the mechanism. Do not force the mechanism.
• Difficulty Inserting/Removing Bits from Storage: Ensure the bit cartridge is aligned correctly. If bits are stiff, gently wiggle them while pulling or pushing.

9. Fa'amatalaga

10. Fa'amaonia ma Lagolago

This Stanley FATMAX product comes with a 2-tausaga le fa'amaoniaga a le gaosiga. For warranty claims, technical support, or spare parts availability, please contact your retailer or visit the official Stanley FATMAX webnofoaga. Taofi lau fa'amaoniga o le fa'atau mo le fa'amaoniaina o le fa'amaonia.