Electro-Harmonix Small Clone EH 4600 Analog Chorus Pedal User Manual

Folasaga

The Electro-Harmonix Small Clone Analog Chorus Pedal is designed to produce lush, shimmering chorus tones. This pedal is renowned for its rich, warm analog sound, making it a valuable tool for guitarists seeking classic modulation effects. It offers a range of chorus effects from subtle shimmer to dramatic, swirling modulation, suitable for various musical styles.

Key features include true bypass for signal integrity, a 9V battery for power, and a pure analog circuit for authentic tone.

O a mea i totonu o le Pusa

• Electro-Harmonix Small Clone EH 4600 Analog Chorus Pedal
• 9V maa

Seti

Malosi o le Pedal

The Small Clone EH 4600 can be powered by a 9V battery (included) or an optional 9V DC power adapter (not included). To install the battery, remove the bottom plate of the pedal.

So'oga

The pedal features standard 1/4 inch (6.35mm) audio jacks for input and output.

1. Fa'afeso'ota'i lau kitara po'o se isi lava mea faifaaili i le INPUT le jack i le itu taumatau o le pedal.
2. Fa'afeso'ota'i le GALUEGA le jack i le itu tauagavale o le pedal i lau amplifier or the input of another effects pedal.

Fa'atonuga o Galuega

The Small Clone EH 4600 features simple controls for easy tone shaping.

Pulea

• TULAGA Knob: This knob controls the speed of the chorus effect. Turning it clockwise increases the speed, while turning it counter-clockwise decreases it.
• DEPTH Switch: This switch controls the intensity or width of the chorus effect. The up position provides a deeper, more pronounced chorus, while the down position offers a more subtle effect.
• Tulaga TAITAIINA: Indicates when the effect is active.
• FOOTSWITCH: Engages or bypasses the effect. The pedal features true bypass, ensuring your instrument's tone remains unaffected when the pedal is disengaged.

Vitio Oloa Aloaia

Tausiga

To ensure optimal performance and longevity of your Small Clone EH 4600 pedal, follow these simple maintenance guidelines:

• Fa'amamaina: Faaaoga se ie vaivai ma mago e faamama ai le pito i fafo o le pedal. Aloese mai le faaaogaina o vailaau faamama po o vailaau e solvents ai.
• Suiga maa: If using battery power, replace the 9V battery when the STATUS LED dims or the effect performance degrades. To replace, carefully remove the four screws on the bottom plate, replace the battery, and reattach the plate.
• Teuina: Teu le pedal i se nofoaga malūlū ma mago, 'alo 'ese mai le susulu sa'o o le la ma le vevela tele pe a le o fa'aaogaina.

Fa'afitauli

If you encounter issues with your Small Clone EH 4600, try the following steps:

• Leai se leo: Check all cable connections. Ensure the power supply (battery or adapter) is functioning correctly. Verify that your instrument and amplifier are working.
• Weak or Distorted Effect: Replace the 9V battery if it's low. Ensure all cables are fully inserted and not damaged.
• Pio lē mana'omia: Try using a different power supply or a fresh battery. Ensure the pedal is not placed too close to other electronic devices that might cause interference.

Fa'amatalaga

Fa'amaonia & Lagolago

For warranty information, technical support, or further inquiries, please visit the official Electro-Harmonix store or contact their customer service directly.

E mafai ona e mauaina nisi fa'amatalaga ma lagolago ile Electro-Harmonix Store.