Tusitaiala mo le Fa'aaogāina o le Papamaa Motherboard GIGABYTE GA-970A-DS3P AM3+

Folasaga

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your GIGABYTE GA-970A-DS3P AM3+ motherboard. This motherboard features GIGABYTE UEFI Dual BIOS technology, Ultra Durable 4 Classic technology, and supports AMD AM3+ FX/AM3 Phenom II, Athlon II series processors. It includes 2 PCI-E 2.0 x16 interfaces with AMD CrossFire support, 6 native SATA3 ports with up to 6Gbps link speed and RAID 0,1,5,10 support, and 4 USB 3.0 ports with transfer rates of up to 5Gbps. Please read this manual thoroughly before proceeding with installation or operation.

Seti ma Fa'apipi'i

A'o le'i amataina le fa'apipi'iina, ia mautinoa ua tape le eletise o lau masini ma ua motusia le uaea mai le sapalai i le puipui. Ofu se fusipa'u e tete'e atu i le eletise e puipuia ai le fa'aleagaina o vaega o le masini mai le eletise e ala i le electrostatic discharge (ESD).

1. Fa'apipi'i CPU

This motherboard supports AMD AM3+ FX, AM3 Phenom II, and Athlon II series processors. Carefully open the CPU socket lever, align the CPU with the socket (matching the golden triangle on the CPU to the triangle on the socket), gently place the CPU into the socket, and then close the lever to secure it.

Ata 1: Tulaga i lalo view of the GIGABYTE GA-970A-DS3P motherboard, highlighting the AM3+ CPU socket in the center.

2. Fa'atonuga (RAM) Fa'apipi'i

The motherboard features four 1.5V DDR3 DIMM sockets, supporting up to 32 GB of system memory. Compatible speeds include DDR3 2000(O.C), 1866, 1333, and 1066 MHz. Open the clips on both ends of the DIMM slot, align the memory module with the slot key, and press firmly until the clips snap into place.

3. Fa'apipi'i Mea Fa'apipi'i

Connect your SATA storage devices (HDDs, SSDs) to the 6 native SATA 6Gb/s connectors. These ports support RAID 0, RAID 1, RAID 5, and JBOD configurations. Ensure proper cable connection for both data and power.

4. Fa'apipi'i Card Fa'alautele

The motherboard provides 2 PCI Express x16 slots (one running at x16, one at x4), 3 PCI Express x1 slots, and 2 PCI slots. Insert your graphics cards or other expansion cards firmly into the appropriate slots until they are securely seated.

5. So'oga Malosi

Connect the 24-pin ATX main power connector and the 8-pin ATX 12V power connector from your power supply to the corresponding sockets on the motherboard.

6. Feso'ota'iga Laulau i tua

Connect your peripherals to the rear I/O panel. This includes USB devices, Ethernet cable, and audio devices.

Figure 2: Rear I/O panel with ports for USB, Ethernet, and audio connections.

7. Internal Headers

Connect front panel USB ports (up to 12 USB 2.0/1.1 ports and 4 USB 3.0/2.0 ports), audio jacks, and system indicators/buttons to the respective headers on the motherboard.

Fa'atonuga o Galuega

After successful installation, power on your system. The GIGABYTE UEFI Dual BIOS provides a user-friendly interface for system configuration. You can access the BIOS setup by pressing the Del ki i le taimi e amata ai le faiga.

• Seti a le BIOS: Configure boot order, system time, and hardware settings.
• UEFI Interface: Navigate using a mouse for easier control.
• GIGABYTE On/Off Charge: Utilize this technology for enhanced USB charging capabilities.

Tausiga

O le tausiga masani e faʻamautinoa ai le faʻatinoga sili ona lelei ma le umi o le ola o lau motherboard.

• Tumau Mama: Periodically clean dust from the motherboard and cooling components using compressed air. Ensure the system is powered off and unplugged before cleaning.
• Fa'afouga ta'avale: Siaki e le aunoa le GIGABYTE official webnofoaga for the latest drivers and BIOS updates to ensure compatibility and performance.
• BIOS Backup: GIGABYTE UEFI Dual BIOS technology provides a backup BIOS. Ensure it is functioning correctly for system stability.

Fa'afitauli

Afai e te feagai ma faʻafitauli, faʻafesoʻotaʻi laʻasaga masani o loʻo mulimuli mai:

• Leai se Malosi: Verify all power cables (24-pin ATX, 8-pin ATX 12V) are securely connected to the motherboard and power supply. Check the power supply unit (PSU) functionality.
• Leai se fa'aaliga: Ensure the graphics card is correctly seated in its PCI-E slot and connected to the monitor. If using integrated graphics (not applicable for this model without an APU), ensure the monitor is connected to the motherboard's video output.
• Fa'atonuga/Fa'alavelave: Check RAM modules for proper seating. Ensure CPU cooler is correctly installed and making good contact. Update drivers and BIOS.
• E le'i iloa le pito i tua: Verify USB or SATA device connections. Check device manager for driver issues.
• Toe setiina le BIOS: If system fails to boot after BIOS changes, clear CMOS by removing the CMOS battery for a few minutes or using the Clear CMOS jumper (refer to the full manual for exact location).

Fa'amatalaga

Fa'amatalaga Fa'amaonia

This product may be eligible for extended protection plans. For example, a 3-Year Protection Plan is available. Please refer to your purchase documentation or the retailer's website for specific warranty terms and conditions applicable to your region and purchase.

Lagolago

For further assistance, technical support, or to download the latest drivers and utilities, please visit the official GIGABYTE webnofoaga:

• GIGABYTE Aloaia Webnofoaga
• GIGABYTE Amazon Store