1. Folasaga
The PeakTech 6150 is a high-quality, 3-channel linear laboratory power supply designed for precise and stable DC voltage and current output. It features a modern design with 3-digit blue LED displays for quick and accurate readings of voltage and current values. This manual provides essential information for the safe and efficient operation, setup, and maintenance of your PeakTech 6150 power supply.
Ata 1: Luma view of the PeakTech 6150 Linear Power Supply, showing the display, control knobs, and output terminals.
2. Faatonuga Saogalemu
Please read and understand all safety instructions before operating the device. Failure to comply with these instructions may result in electric shock, fire, or damage to the device.
- Fa'afeso'ota'i i taimi uma le masini i se so'o eletise ua fa'avae.
- Aua le faagaoioia le masini i le susu pe oamp tulaga.
- Ia mautinoa le sa'o o le ea e puipuia ai le vevela tele. Aua le poloka avanoa e savili ai.
- Aua le tatalaina le masini casing. Fa'asino uma auaunaga i tagata faigaluega agavaa.
- Fa'amaonia le fa'aoga voltage matches the device's requirements before connecting to power.
- Always disconnect power before making or changing connections to the output terminals.
- The device is equipped with overload and short-circuit protection. However, avoid intentional short circuits or exceeding current limits for prolonged periods.
- This device complies with safety standard EN 61010-1.
3. Vaega o Oloa
The PeakTech 6150 power supply offers the following key features:
- Linear design for stable and low-noise output.
- Adjustable main output: 0-30V DC and 0-5A DC.
- Fixed voltage outputs: 5V/500mA and 12V/500mA with excellent stability and low ripple.
- 3-digit blue LED displays for simultaneous voltagu ma faitauga o iai nei.
- Otometi tumau voltage (CV) and constant current (CC) mode selection.
- Continuously adjustable current limit in constant current mode.
- 4mm safety sockets for secure connections.
- Output disable function for safe connection/disconnection of loads.
- Comprehensive overload and short-circuit protection.
4. Mea i totonu o le afifi
A uma ona tatala le afifi, fa'amolemole ia mautinoa o lo'o iai mea uma ma e le'i fa'aleagaina:
- PeakTech 6150 Linear Power Supply Unit
- Uaea Malosi
- Tusi Taiala
Afai e misi pe ua faaleagaina ni mea, fa'amolemole fa'afeso'ota'i loa lau kamupani sapalai.
5. Seti
- Tu'uga: Place the power supply on a stable, level surface with adequate ventilation space around it. Ensure the rear fan is not obstructed.
- So'oga Malosi: Connect the provided power cable to the AC input socket on the rear panel of the device. Plug the other end into a suitable grounded AC power outlet.
- Siaki Muamua: Before connecting any load, ensure the main output voltage and current knobs are set to their minimum positions (fully counter-clockwise).
Ata 2: Tua view of the PeakTech 6150 Linear Power Supply, showing the power input and ventilation fan.
6. Fa'atonuga o Galuega
6.1. Malosi i luga/Pepe
- Press the "POWER" switch on the front panel to turn the unit ON. The LED displays will illuminate.
- To turn OFF, press the "POWER" switch again.
6.2. Adjustable Main Output (0-30V / 0-5A)
- So'oga uta: Ensure the "OUTPUT" switch is OFF (LED off). Connect your load to the main output terminals (red for positive, black for negative) using 4mm safety banana plugs.
- Seti Voltage: Use the "VOLTAGE" knob to adjust the desired output voltagu Le voltage will be displayed on the right LED display.
- Setting Current Limit: Use the "CURRENT" knob to set the maximum current limit. This is crucial for protecting your circuit. The current limit is displayed on the left LED display when the unit is in Constant Current (CC) mode or when adjusting the knob.
- Activating Output: Once voltage and current limits are set, press the "OUTPUT" switch to turn the output ON (LED illuminates).
- Tumau Voltage (CV) Mode: When the load current is below the set current limit, the power supply operates in Constant Voltage (CV) mode, maintaining the set voltage. The "CV" indicator LED will be lit.
- Constant Current (CC) Mode: If the load current attempts to exceed the set current limit, the power supply automatically switches to Constant Current (CC) mode, maintaining the set current by reducing the output voltage. The "CC" indicator LED will be lit.
6.3. Fixed Voltage Outputs (5V/500mA, 12V/500mA)
The PeakTech 6150 also provides two fixed voltage outputs: 5V at 500mA and 12V at 500mA. These outputs are always active when the unit is powered on and are independent of the main adjustable output.
- Connect your load to the respective 5V/500mA (red/blue terminals) or 12V/500mA (red/blue terminals) safety sockets.
- Ensure the load does not exceed the 500mA current rating for these outputs.
Figure 3: PeakTech 6150 Linear Power Supply in a typical laboratory setup, demonstrating its compact size and clear display.
7. Tausiga
The PeakTech 6150 power supply requires minimal maintenance.
- Fa'amamaina: Disconnect the power supply from the mains before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or solvents.
- Savili: Periodically check that the ventilation openings and fan are free from dust and debris. Use compressed air to clear if necessary.
- Teuina: A le fa'aaogaina mo se taimi umi, teu le masini i se nofoaga malulu, matutu, mamao ese mai le susulu o le la ma le vevela tele.
- Au'aunaga: There are no user-serviceable parts inside. Do not attempt to open or repair the unit yourself. Contact qualified service personnel for any repairs.
8. Faʻafitauli
If you encounter issues with your PeakTech 6150, refer to the following common problems and solutions:
| Fa'afitauli | Mafuaaga e ono tupu | Fofo |
|---|---|---|
| No power/displays off | Power cable not connected; Power switch off; No AC power from outlet. | Ensure power cable is securely connected; Turn power switch ON; Check wall outlet with another device. |
| No output from main terminals | "OUTPUT" switch is OFF; Voltage/Current knobs set to zero; Overload/Short-circuit protection activated. | Press "OUTPUT" switch ON; Adjust voltage/current knobs to desired values; Check load for short circuits or excessive current draw. |
| Unit switches to CC mode unexpectedly | Load current exceeds set current limit. | Increase the current limit using the "CURRENT" knob, or reduce the load's current draw. |
| Fixed outputs (5V/12V) not working | Unit not powered on; Load exceeds 500mA. | Ensure unit is powered on; Reduce load on fixed outputs. |
If the problem persists after trying these solutions, please contact PeakTech customer support.
9. Fa'amatalaga
| Parameter | Taua |
|---|---|
| Fa'ata'ita'iga | P 6150 |
| Galuega Autu Voltage | 0 - 30V DC (Adjustable) |
| Main Output Current | 0 - 5A DC (Adjustable) |
| Fixed Output 1 | 5V / 500mA |
| Fixed Output 2 | 12V / 500mA |
| Fa'aaliga | 3-digit Blue LED (Voltage, Current) |
| Malosiaga o Galuega | 150 Watts |
| Tulaga Saogalemu | EN 61010-1 |
| Fua (L x W x H) | 28.5 x 17 x 15.5 cm |
| mamafa | 5.76 kilokalama |
| Ituaiga Feso'ota'i | 4 mm safety sockets |
10. Fa'amaonia ma Lagolago
PeakTech products are manufactured under strict quality control. In the unlikely event of a defect, please contact your dealer or PeakTech directly.
For technical support or warranty inquiries, please refer to the contact information provided with your purchase documentation or visit the official PeakTech webnofoaga: www.peaktech.de.
Please have your model number (P 6150) and purchase date ready when contacting support.
