Folasaga
The AbleNet PowerLink 4 is an assistive technology wireless switch control unit designed to enable individuals to control up to two electrical appliances using single switches. This device offers various modes of control, allowing for flexible and customized operation of connected appliances. It is compatible with a wide range of AbleNet wired and wireless switches, enhancing accessibility and promoting independence.
Fa'amatalaga Saogalemu
- Always plug the PowerLink 4 into a properly grounded AC wall outlet.
- Aua ne'i fa'aalia le iunite i le vai po'o le susu tele.
- Ensure that connected appliances do not exceed the PowerLink 4's maximum power rating. Refer to the specifications section for details.
- Keep the device out of reach of children unless under direct supervision.
- If the unit appears damaged or malfunctions, discontinue use immediately and contact AbleNet support.
Ua Umaview
The PowerLink 4 features a user-friendly interface with clearly labeled buttons and status indicators for easy operation and mode selection.
Ata: Luma view of the AbleNet PowerLink 4 control unit, showing the central Mode button, Status buttons, plus and minus buttons, and indicator lights for various control modes (Direct, Latch, Timed Sec., Count, Two-switch, Timed Min.). A digital display shows numerical values.
Pulea ma Fa'ailoga:
- Faiga Fa'amau: Used to cycle through the different control modes.
- Status Buttons: Indicate the current status of each appliance output.
- Fa'amau Fa'aopoopo (+) ma Fa'amau To'ese (-): Adjust time settings for timed modes.
- Faʻamatalaga Faʻaaliaina: Shows numerical values for timed modes or count mode.
- Molī Fa'ailoga Fa'ailoga: LEDs illuminate next to the selected mode (Direct, Latch, Timed Sec., Count, Two-switch, Timed Min.).
Seti
Follow these steps to set up your PowerLink 4 unit:
Ata: Tua view of the AbleNet PowerLink 4 control unit, showing the two power outlets, switch input jacks, and a label with basic setup and use instructions.
- Plug the PowerLink 4 into an AC wall outlet and turn the unit ON using the power switch located on the side.
- Plug the appliance(s) you wish to control into either power cable on the PowerLink 4. Ensure the appliance is turned ON.
- Attach your desired switch(es) using the switch input jacks or by establishing a wireless link with compatible AbleNet wireless switches.
- Oomi le Faiga button to select the desired mode of control.
- Press the connected switch(es) to activate the appliance(s).
Operating Instructions: Modes of Control
The PowerLink 4 offers six distinct modes of control to suit various needs:
- Fa'atonu: The appliance remains on only while the switch is activated. Releasing the switch turns the appliance off.
- Lago: The first activation of the switch turns the appliance ON. The second activation turns the appliance OFF.
- Timed Seconds: Allows the appliance to run for a user-defined duration from 1 to 60 seconds with a single switch activation. Use the Plus (+) and Minus (-) buttons to set the time.
- Timed Minutes: Allows the appliance to run for a user-defined duration from 1 to 60 minutes with a single switch activation. Use the Plus (+) and Minus (-) buttons to set the time.
- Faitau: Similar to Direct mode, but the digital display shows the number of switch activations. Each switch activation will be shown in the display window.
- Two-Switch: To turn the appliance ON, both connected switches must be activated simultaneously. This mode is ideal for applications requiring dual control.
Compatible Switches:
The PowerLink 4 is designed to work seamlessly with a variety of AbleNet switches. Exampe aofia ai:
For a complete list of compatible switches, please refer to the AbleNet webnofoaga po'o fa'afeso'ota'i le lagolago a tagata fa'atau.
Tausiga
To ensure the longevity and proper functioning of your PowerLink 4:
- Fa'amamā le masini i se ie vaivai ma mago. Aua le fa'aaogaina ni mea fa'amamā po'o ni vaila'au fa'amama.
- Aloese mai le pa'u i lalo o le iunite po'o le tu'uina atu i ni a'afiaga malolosi.
- Teu le iunite i se nofoaga malulu ma mago pe a le faʻaaogaina.
Fa'afitauli
If you encounter issues with your PowerLink 4, try the following:
- E le ola le iunite: Ensure the power cord is securely plugged into a live AC outlet and the unit's power switch is in the ON position.
- Appliance does not activate:
- Verify the appliance is plugged into the PowerLink 4 and is itself turned ON.
- Check that the switch is properly connected to the PowerLink 4.
- Ensure the correct control mode is selected on the PowerLink 4.
- Test the switch with another device if possible to confirm it is functioning.
- Incorrect timing in Timed modes: Re-adjust the time using the Plus (+) and Minus (-) buttons.
For further assistance, please contact AbleNet customer support.
Fa'amatalaga
| Fa'aaliga | Fa'amatalaga |
|---|---|
| Numera Fa'ata'ita'i | 10010701 |
| Fa'ailoga | mafaiNet |
| Ofisa o mea faigaluega | USB (for certain switch types) |
| Masini Fegalegaleai | AbleNet Wired Switch, AbleNet Wireless Switch |
| Mea mamafa | 1 Pauna |
| Fuafuaga Mea | 13.15 x 11.85 x 3.78 inisi |
| Aso Muamua Maua | Oketopa 31, 2011 |
| UPC | 736846868244 |
Fa'amaonia ma Lagolago
AbleNet products are designed for durability and reliability. For specific warranty details, please refer to the documentation included with your product or visit the official AbleNet website. AbleNet offers the ableCARE program to provide guidance and support for implementing their assistive technology solutions.
For technical support, product inquiries, or warranty claims, please contact AbleNet directly through their official web'upega tafa'ilagi po'o auala o auaunaga a tagata fa'atau.
