Arashi Vision Insta360 Feso'ota'i Pule mamao
Fa'amatalaga
- Fa'ata'ita'iga: CINSBABB
- Ulufale: 5V / 600mA
- Bluetooth Fa'agaoioi Auala: 2402~2480MHz
- Malosi o Galuega (EIRP): 3dBm (mo CE)
- Maa: 600mAh, 2.31Wh
- O le vevela o galuega: 0°C i le 40°C
- Fua vevela: 0°C i le 45°C
Faiga Papapa'epa'e:
To enter Whiteboard Mode, press the corresponding button on the remote control. Use the Zoom In and Zoom Out buttons to adjust the camera zoom level. Tap the Menu button to access additional settings.
Touch Navigation:
Use the touch navigation to interact with the menus and options on the screen. Tap on items to select them or navigate through different settings.
Ki tua:
Press the Back button to exit the current menu or mode and return to the previous one.
Gūgū
To mute or unmute the microphone, press the Mute button on the remote control.
Totogiina
Connect the USB-C cable to the USB-C port on the remote control for charging. Make sure to fully charge the remote control before initial use.
Pairing with Insta360 Connect:
To pair and connect with Insta360 Connect, press and hold the Insta360 Connect button on the remote control. Follow the on-screen instructions for pairing.
Fa'aaliga o Mea
|
1 |
Faiga Papapa'epa'e |
• In meeting with Privacy Mode off: If the whiteboard settings* have been set before the meeting, press the button to display the whiteboard area directly. If this has not been set before a meeting, press the button to activate whiteboard recognition and display the whiteboard area.
• Privacy Mode on: the button will do nothing. |
| 2 | OK | Confirm options or prompt when setting. |
| 3 | Sa'o i totonu | The camera zooms in. Tap or hold to zoom in. |
| 4 | So'o i fafo | The camera zooms out. Tap or hold to zoom out. |
| 5 | Menu | Wake Up sidebar shortcut menu, tap again to close the sidebar. |
|
6 |
Tago faatautaiga |
• Navigate menu items when setting. Touch or press to navigate. |
| 7 | Tua | Exit the current menu or mode and return to the former one. |
| 8 | Gūgū | Gūgū pe fa'a'ese le masini faaleotele leo. |
Whiteboard Settings: Click the Menu Button
of the remote control, enter the sidebar, choose Settings > Camera > Whiteboard Settings, and set according to the interface.
|
9 |
Faʻasologa auala |
• In a meeting with Privacy Mode off: Press to switch to Gallery Mode. Press it again to exit this mode and switch to Manual Mode.
• Privacy Mode on: the button will do nothing. |
|
10 |
Su'ega a le Fofoga Fetalai |
• In a meeting with Privacy Mode off: Press to enter Speaker Tracking mode. Press it again to exit mode and switch to Manual Mode.
• Privacy Mode on: Press to open the camera, and the camera switches to Speaker Tracking mode. |
| 11 |
Fa'avae Vaega |
• In a meeting with Privacy Mode off: Press to switch to Group Framing mode. Press it again to exit this mode and switch to Manual Mode.
• Privacy Mode on: Press to open the camera, and the camera switches to Group Framing mode. |
| 12 | I luga le Volume | Tap or long-press to adjust the volume up. |
| 13 | Volume i lalo | Tap or long-press to adjust the volume down. |
| 14 | Uafu USB-C | Fa'afeso'ota'i le sapalai eletise e fa'aola ai le fa'atonu mamao. |
Feso'ota'i le Insta360 Feso'ota'i
First connection: After powering on Insta360 Connect, a pairing screen will appear. Long-press the Menu Button ma le Pa'u Papalagi 
on the remote control to pair and connect with Insta360 Connect.
- Pair a new remote control:
- A: Click the Bluetooth button on Insta360 Connect to open the pairing menu. Long-press the Menu Button ma le Pa'u Papalagi on the new remote control at the same time to pair and connect; this will unpair with the old remote control at the same time.
- B: Click the Menu Button of the remote control, enter the shortcut sidebar, choose Settings > Peripherals > Pair a new remote control, and pair according to the prompts on the interface.
- A: Click the Bluetooth button on Insta360 Connect to open the pairing menu. Long-press the Menu Button
- Standby and reconnection: The remote control enters standby after 3 hours of idling. Pick up the remote control and press any button to activate it again.
Totogiina
- Charging specification：5V/600mA
Charging methods：
- The remote control can be charged with a phone or tablet adapter or a power bank.
- Use a USB-C cable to connect the remote control to your computer for charging.
- Connect the remote control to Insta360 Connect with a USB-C cable to charge the remote control.
Fa'aaliga: The 1.8m and an optional 10m USB C-C cable equipped with Insta360 Connect, as well as USB C-C copper cables for phones or tablets, support remote control charging.
Fa'amatalaga:
- Fa'atumu atoa le fa'atonu mamao a'o le'i fa'aaogaina mo le taimi muamua.
- Do not let the remote control come into contact with any liquid; do not get it wet. If the inside of the product comes into contact with water, chemical decomposition may occur, potentially resulting in a battery fire or explosion.
- Aua le pa'u pe ta le oloa. Aua le tu'u ni mea mamafa i luga o le oloa.
- The product should be charged in temperatures from 0℃ to 45℃ ,nd be stored from -20℃ to 40℃ . o not use or store rthe emote control in extremely hot environments. High or low temperatures may affect battery life.
- If the product is not used for a long time (e.g., 3 months or longer), the battery may be depleted. Please charge the product to turn it on.
Fa'amatalaga
| Fa'ata'ita'iga: CINSBABB | |
| Ulufale | 5V / 600mA |
| Bluetooth | Fa'agaoioi Auala: 2402~2480MHz |
| Output Power(EIRP) : 3dBm (for CE) | |
| Ma'a | |
| Enerigy: 2.31Wh
Charging time: 5V/0.6A can be charged to 90% in 60 minutes, and 5V/0.6A can be charged to 100% in 100 minutes. ℃ ℃ (32° F – 104° F) |
|
| O le vevela o galuega
Fua vevela |
0 ~ 40
0℃ ~ 45℃ (32° F – 113° F) |
Fa'ailoga
Please read this Disclaimer carefully. Using this product means that you acknowledge and accept the terms of this disclaimer. By using this product, you hereby acknowledge and agree that you are solely responsible for your conduct when using this product and any consequences thereof. You agree to use this product only for proper and lawful purposes.
You understand and agree that Arashi Vision Inc. (hereinafter referred to as ‘Insta360’) accepts no liability for any misuse, consequences, damages, injuries, penalties, or any other legal responsibility directly or indirectly incurred by your using this product. Before every use, make sure that your product is functioning properly. If there’s any damage or irregularity, stop using it immediately.
I totonu o le lautele o tulafono a le setete ma tulafono faatonutonu, Insta360 faʻaagaga le aia tatau i faʻamatalaga mulimuli ma toe iloiloga mo le tautinoga.
Auaunaga Pe a uma ona Fa'atau
The warranty period of the attached product is 2 years from the original retail purchase. Warranty service may vary according to the applicable laws of your state or jurisdiction. For detailed warranty policies, please visit https://insta360.com/support.
EC REP
Gartenfelder Straße 29-37, Gebäude 31/31.12 1.OG, 13599 Berlin,Germany+4930221520255 service@insta360.com
Arashi Vision Inc.
- ADD: 1 lth Floor, Building 2, Jinlitong Financial Center, Baolan District,
- Shenzhen, Guangdong, Saina
- WEB: wwwinsta360.com
- TEL: 400-833-4360
- +1 800 6920 360
- EMAIL: service@insta360.com
FAQs
Q: O le a se mea e tatau ona ou faia pe a susu le masini mamao?
A: Do not let the remote control come into contact with any liquid or get it wet. If it does get wet, immediately dry it thoroughly before use to prevent any damage.
Q: E fa'afefea ona ou fetuunai le leo?
A: Use the Volume Up and Volume Down buttons on the remote control to adjust the volume levels. Long press to make larger adjustments.
Q: O le a le vaitaimi faʻamaonia mo le oloa?
A: The warranty period for the product is 2 years from the original retail purchase date. For detailed warranty policies, please visit our support page at https://insta360.com/support.
Pepa / Punaoa
 |
Arashi Vision Insta360 Feso'ota'i Pule mamao [pdf] Tusi Taiala CINSBABB, 2AWWH-CINSBABB, Insta360 Fesoʻotaʻi Pule mamao, Insta360 Fesoʻotaʻi, Pulea Mamao |