Altronix ACMCB220 Avanoa Pule Pule ma Sapalai Malosiaga Taiala Fa'apipi'i

Altronix ACMCB220 Fa'asologa iunite tufatufaina ma fesuiai le paoa e maua ai faiga pulea ma mea faaopoopo. Latou te fa'aliliuina se 220VAC (vaega galue 198VAC - 256VAC), 50/60Hz fa'aoga i totonu o le valu (8) fa'atonuina tuto'atasi 12VDC po'o le 24VDC PTC galuega fa'asao. E fa'agaoioia galuega e ala ile fa'agogo o le aoina po'o le masani ona matala (LEAI) fa'aulu fa'aoso fa'aulu mai se Access Control System, Card Reader, Keypad, Push Button, PIR, etc. Units o le a fa'aosoina le mana i le tele o mea fa'aoga masini e aofia ai: Mag Loka, Tu'i Fa'aeletise, Fa'amau Faitoto'a, ma isi mea. O le a fa'agaoioia mea uma e lua i le Fail-Safe ma/po'o le Fail-Secure mode. O le FACP Interface e mafai ai le Faʻalavelave Faʻafuaseʻi, Mataʻituina o le Alarm, pe mafai foi ona faʻaaogaina e faʻaoso ai isi masini fesoasoani. O le fa'aaliga motusia fa'ailo afi e mafai ona filifilia ta'ito'atasi mo so'o se mea po'o galuega uma e valu (8).

ACMCB220 Fa'asologa Fa'asologa Fa'asinomaga Siata

Altronix Numera Fa'ata'ita'i	12VDC Aofa'iga Fa'aola i le taimi nei	24VDC Aofa'iga Fa'aola i le taimi nei	PTC Tu'uga (e mafai ona toe setiina)	Fa'avasegaga o Galuega Ta'ito'atasi	220VAC 50/60Hz Fa'aaofia Tusi Fa'asolo	Fa'ailoga Fuse Fuse Fa'atonu a le Komiti Fa'atonu Fa'atonu	Fa'atonuga a le Komiti Fa'atonu Ma'a Fuse
AL400AMCCB220	4A	3A	8	2.5A	1.2A	5A/250V	15A/32V
AL600AMCCB220	6A	6A			1.5A		–
AL1012AMCCB220	10A	–			2.2A		15A/32V
AL1024AMCCB220	–	10A			3A		15A/32V

Fa'amatalaga

Ulufale:

Filifiliga fa'aoga sapalai eletise:
- Tasi (1) fa'aoga masani mo le ACM8CB ma le loka loka (fa'apipi'i falegaosimea).
- E lua (2) fa'aoga eletise tu'ufua - Tasi (1) e fa'aola ai le ACM8CB ma le tasi (1) mo le paoa fa'apipi'i loka (e mana'omia le paoa mai fafo).
  O le taimi nei e fuafua i le sapalai eletise e fesoʻotaʻi, e le sili atu i le maualuga ole 10A le aofaʻi.
E valu (8) Avanoa Fa'atonu Fa'atonu mea fa'aoso.
Filifiliga ulufale:
- E valu (8) mea e masani ona tatala (LEAI).
- E valu (8) mea e fa'aogaina mo le aoina mai.
- Soo se tuufaatasiga o mea o loo i luga.

Fa'atosina:

12VDC poʻo 24VDC gaioiga.
O galuega fa'atapula'aina o le malosi.
E valu (8) fa'atonutonu tuto'atasi le Fail-Safe ma/po'o le Fail-Secure power outputs.
E valu (8) malosiaga fesoasoani (e le'i sui)
PTCs Output ua fa'amauina @ 2.5A.
Fa'amama ma fa'atonutonu fa'aeletoroni galuega (sapalai eletise faufale).

Fa'ailoga Vaaia:

O LED mumu e ta'u mai ai galuega faatino o lo'o fa'aosoina (fa'aola fa'amalosi).
O lo'o fa'ailoa mai e le LED lanu meamata ua motusia le FACP.
AC fa'aoga ma DC fa'ailoga fa'ailoga LED.

Fa'aola ma'a:

Fausia-i le charger mo faʻamau faʻamau faʻamauina acid po o gel ituaiga.
AL400XB2V, AL600XB220, ma AL1012XB220 (Power Supply Board) tau maualuga o loʻo iai nei 0.7A. AL1024XB2V (Power Supply Board) tau maualuga o loʻo iai nei 3.6A.

Otometi fesuiaʻi i luga e tu i le maa pe a le faia AC.
AC fa'aoga ma DC fa'ailoga fa'ailoga LED.
Zero voltage pa'u pe a sui le iunite i le maa (tulaga ua faaletonu AC).
Ua faaletonu le maa ma le vaavaaiga o le i ai o maa (faiga "C" fesootaiga).

Vaega:

Ta'oto'oto le Ala Alamu (fa'amau po'o le le fa'amauina) e mafai ona filifilia ta'ito'atasi mo so'o se mea po'o galuega uma e valu (8).

Fa'ailoga afi motu'ese filifiliga fa'aoga:
- E masani ona tatala (LEAI) po'o le masani ona tapuni (NC) mea fa'afeso'ota'i mago.
- Faiga fa'aliliuga fa'apolokalame mai le fa'ailoga fa'ailoga FACP.

E fa'ailoa mai ole fa'ailoga fa'ailo ole fa'aulu ole FACP (pepa "C" fa'amauina @ 1A 28VDC).
Puipuiga pupuu ma le vevela ova le mamafa.

Fua Fa'amau (H x W x D pe tusa):

15.5” x 12” x 4.5”
(393.7mm x 304.8mm x 114.3mm).

Fa'amau e fa'aogaina ma'a e lua (2) 12AH.

Fa'atonuga fa'apipi'i

E tatau ona ogatasi auala uaea ma le National Eletise Code/NFPA 70/NFPA 72/ANSI, ma fa'atasi ai ma tulafono fa'alotoifale uma ma pulega o lo'o iai le fa'amasinoga. O oloa e fa'amoemoe mo na'o totonu.

Fa'amau le iunite i le nofoaga e mana'omia. Faailoga ma mua'i vili pu i le puipui e laina ai ma pu ki pito i luga e lua i totonu o le pa. Fa'apipi'i ni fa'amau pito i luga ma fa'a sikulima i luga o le puipui ma fa'aoso fa'aulu ulu. Tuu pu ki pito i luga o le pa i luga o sikulima pito i luga e lua, faʻamautu ma faʻamautu. Faailoga le tulaga o pu e lua pito i lalo. Aveese le pa. vili pu pito i lalo ma fa'apipi'i fa'amau e tolu. Tuu pu ki pito i luga o le pa i luga o sikulima pito i luga e lua. Fa'apipi'i fa'amau pito i lalo e lua ma fa'amautinoa ua fa'amau uma fa'avili (Liga Fa'amau, itulau 12). Faamautu pa i le eleele eleele.
E fautuaina e toe muamuaview o laulau nei e faafaigofie ai le faapipiiina:
Galuega Faatino Voltagu ma Siata Fa'amatalaga Fa'atonu (itulau 3)
Fa'ata'ita'iga masani (itulau 6)
Su'esu'ega LED (itulau 6)
Fa'ailoga Fa'ailoga (itulau 5)
Fa'ata'i Fa'atasi (itulau 8-9)

Seti galuega faatino voltage:
AL400AMCCB220 ma le AL600AMCCB220: seti le mana'oga DC vol.tage ala i le setiina o le ki SW1 i le tulaga talafeagai i luga o le laupapa sapalai eletise. AL1012AMCCB220 o loʻo faʻatulagaina falegaosimea i le 12VDC ma AL1024AMCCB220 o loʻo faʻatulagaina i le 24VDC (Output Voltagu ma Siata Fa'amatalaga Tu'u i lalo)
Galuega Faatino Voltagu ma Siata Fa'amatalaga Tutu-ati:
AL400AMCCB220

Voltage	Sui Tulaga	Tutu-i le ma'a	4 itula. Tutu-tu'i / 5 min. Alalaga	24 itula. Tutu-tu'i / 5 min. Alalaga
12VDC	SW1 – ON	40TA	3.5A / 3.5A	1A / 3.5A
24VDC	SW1 – OTI	40TA	2.75A / 2.75A	1A / 3A

AL600AMCCB220

Voltage	Sui Tulaga	Tutu-i le ma'a	4 itula. Tutu-tu'i / 5 min. Alalaga	24 itula. Tutu-tu'i / 5 min. Alalaga
12VDC	SW1 – ON	40TA	5.5A / 5.5A	0.5A / 5.5A
24VDC	SW1 – OTI	40TA	5.75A / 5.75A	0.75A / 5.75A

AL1012AMCCB220

Voltage	Sui Tulaga	Tutu-i le ma'a	4 itula. Tutu-tu'i / 5 min. Alalaga	24 itula. Tutu-tu'i / 5 min. Alalaga
12VDC	N/A	40TA	9.5A / 9.5A	0.5A / 9.5A

AL1024AMCCB220 (silasila ile AL1024AMCCB220 Pepa Galuega Fa'atatau o le Tele o le Ma'a, itulau 10).

Voltage	Tutu-i le ma'a	15 minu. Tutu-tu'i / 5 min. Alalaga	4 itula. Tutu-tu'i / 5 min. Alalaga	24 itula. Tutu-tu'i / 5 min. Alalaga	60 itula. Tutu-tu'i / 5 min. Alalaga
24VDC	12TA	7.7A / 9.7A	1.2A / 9.7A	–	–
24VDC	65TA	–	7.7A / 9.7A	1.2A / 9.7A	200mA / 9.7A

Feso'ota'i le AC (Ata 2, itulau 7):
Fa'afeso'ota'i le mana AC e le'i suiina (220VAC, 50/60Hz) i fa'amau fa'ailoga [L, N].
Fa'aaoga le 14 AWG po'o le tele mo so'otaga eletise uma. Fa'amautu uaea lanu meamata ta'ita'i i le fa'a'ele'ele.
Taofi uaea fa'atapula'aina le malosi mai uaea le fa'atapula'aina (220VAC, 50/60Hz Input, Uea Ma'a). E tatau ona tu'uina atu le avanoa aupito itiiti e 0.25".
FA'AALIGA: Aua ne'i pa'i i vaega u'amea fa'aalia. Tapuni le eletise o le lala a'o le'i fa'apipi'i po'o le tautuaina o masini. E leai ni vaega e mafai ona fa'aaogaina i totonu.
Fa'asino le fa'apipi'iina ma le tautuaina o tagata faigaluega fa'apitoa.
Fua voltagu a'o le'i fa'afeso'ota'i masini. E fesoasoani lea e aloese ai mai le faaleagaina.

Filifiliga fa'atino (Ata 1, itulau 6):
O le iunite o le a tu'uina atu pe valu (8) fa'aliliuga eletise, valu (8) fa'amamago "C" galuega, po'o so'o se tu'ufa'atasiga uma e lua o le paoa ma fau le "C", fa'aopoopo i le valu (8) le fa'aogaina o malosiaga fesoasoani.
1. Suia le Malosi galuega:
  Fa'afeso'ota'i le fa'aoga leaga (-) o le masini o lo'o fa'aola i le laina fa'ailoga [COM].
  Mo le Fail-Safe operation fa'afeso'ota'i le fa'aoga lelei (+) o le masini o lo'o fa'aola i le fa'ailoga ua fa'ailoga [NC].
  Mo Fail-Secure faagaioiga fa'afeso'ota'i le fa'aoga lelei (+) o le masini o lo'o fa'aola i le laina fa'ailoga [LEAI].
2. Auxiliary Power outputs (le suiina):
  Fa'afeso'ota'i fa'aoga lelei (+) o le masini o lo'o fa'aola i le laina fa'ailoga [C] ma le leaga (-) o le masini o lo'o fa'aola i le fa'ailoga ua fa'ailoga [COM]. E mafai ona faʻaogaina le faʻaogaina e tuʻuina atu ai le mana mo tagata faitau kata, keypads, ma isi.
Filifiliga fa'aoso mea (Ata 1, itulau 6):
1. E masani ona tatala [LEAI] fa'aoso fa'aulu:
  O mea fa'aoga 1-8 o lo'o fa'agaoioia e ala e masani ona matala po'o matala fo'i mea e tu'u ai le pusa.
  Fa'afeso'ota'i masini (faitau kata, keypads, talosaga e alu ese fa'amau ma isi) i fa'amau fa'ailoga [IN] ma le [GND].
2. Tatala mea e fa'aulu ai le Fa'agogo:
  Fa'afeso'ota'i le avanoa e fa'atonutonu ai le pusa fa'agogo fa'agogo lelei (+) i le fa'ailoga ua fa'ailoga [IN] ma le leaga (-) i le fa'ailoga ua fa'ailoga [GND].

Filifiliga Fefa'ataua'iga Fa'ailoga Afi (Fig. 4 i le 8, itulau 8):
Ole [NC] e masani ona tapuni, e masani ona tatala [LEAI] fa'aoga po'o le fa'aliliuina o le polarity mai le fa'ailoga fa'ailoga FACP o le a fa'aosoina ai galuega ua filifilia. Ina ia mafai le FACP Disconnect mo se mea e gaosia, liliu le ki [SW1-SW8] fa'atatau. Ina ia tape le FACP motusia mo se mea e gaosia, liliu le ki fetaui [SW1-SW8] ON.
1. E masani ona tatala [LEAI] fa'aoga:
  Mo le fa'amau fa'amau (Ata 5, itulau 8). Mo fa'amau fa'amau va'ai le Ata 6, itulau. 9.
2. E masani ona tapunia [NC] fa'aoga:
  Mo le fa'amau fa'amau (Ata 7, itulau 9). Mo fa'amau fa'amau va'ai le Ata 8, itulau. 9.
3. FACP Fa'ailoga Circuit fa'aoso fa'aulu:
  Fa'afeso'ota'i le lelei (+) ma le leaga (-) mai le fa'ailoga fa'ailoga FACP i fa'amau fa'ailoga [+ INP –]. Fa'afeso'ota'i le FACP EOL i fa'amau fa'ailoga [+ RET –] (polarity o lo'o fa'asino i se tulaga fa'ailo). O lo'o tu i tafatafa o le TRG LED e tatau ona tipi (Ata 1a, itulau 6).

FACP Fa'amago fomu “C” galuega (Ata 1a, itulau 6):
Fa'afeso'ota'i le masini e mana'omia e fa'aosoina e le masini fa'afeso'ota'i mago a le iunite i fa'ailoga ua fa'ailoga [NO] ma le [C] FACP mo galuega e masani ona tatala po'o fa'ailoga ua fa'ailogaina [NC] ma le [C] FACP mo mea e masani ona tapuni.
Sootaga maa (Ata 2, itulau 7):
Mo fa'aoga Access Control o maa e filifili. Afai e le fa'aogaina maa, o le leiloa o le AC o le a i'u ai i le leiloa o le voltagu. O maa e tatau ona avea ma ta'i acid po'o le ituaiga gel.
Fa'afeso'ota'i le tasi (1) 12VDC maa i fa'amau fa'ailoga [+ BAT –] mo le fa'agaioiga 12VDC.
Fa'aaoga maa e lua (2) 12VDC uaea fa'asologa mo le fa'agaioiga 24VDC.
Ma'a ma le AC Supervision galuega (Ata. 2, itulau 7):
E mana'omia le fa'afeso'ota'i o masini e lipoti atu fa'alavelave fa'apitoa i galuega fa'ailoga [AC Fail, BAT FAIL] fa'atonuga fa'atonu fa'ailoga [NC, C, NO] i masini fa'ailoa talafeagai. Fa'aaoga le 22 AWG i le 18 AWG mo AC Fai & Low/Leai lipoti maa. 'Oti'oti "AC tuai" osooso e faatuai lipoti mo le 6 itula.
Fa'aaliga: A tampe tatau ona fa'apipi'i le ki ma fa'afeso'ota'i i le masini fa'asilasilaga talafeagai e lipoti atu ai se fa'alavelave fa'aletonu pe a matala le faitoto'a.
Tele mea e maua ai le eletise (Ata 1, itulau 6):
Pe a fa'aogaina le lua (2) fa'atosina sapalai eletise J1 ma le J2 (o lo'o i le itu agavale o le eletise/pulea fa'amau) e tatau ona tipi (Ata 1c, itulau 6 & Ata 3 itulau 8). Fa'afeso'ota'i le mana mo le ACM8CB i fa'amau ua fa'ailoga [– Pule +] ma fa'afeso'ota'i le mana mo masini tapuni i fa'amau ua fa'ailoga [– Power +].
Pe a fa'aogaina le DC power supply polarity e tatau ona mata'ituina.
A fa'aogaina le eletise AC e le mana'omia ona mata'ituina le polarity (Fig. 1d, pg. 6)

Tausiga

E tatau ona su'eina le iunite ia le itiiti ifo ma le tasi i le tausaga mo le fa'agaioiga talafeagai e pei ona taua i lalo:

Galuega Faatino Voltagu Su'ega: I lalo o tulaga masani o uta, o le DC voltage tatau ona siaki mo voltage tulaga (Goofua Voltagu ma Siata Fa'amatalaga Tu'itu'i, itulau. 3).

Su'ega ma'a: I lalo o tulaga masani o uta siaki ua uma le maa, siaki le voltagu i fa'amauga maa ma fa'amau fa'amau laupapa ua fa'ailoga [+ BAT –] ia mautinoa e leai se motusia o uaea feso'ota'iga maa.

Fa'aaliga: AL400XB2V, AL600XB220, AL1012XB220 (Power Supply Board) le maualuga o le tau o le taimi nei o le 0.7A.
AL1024XB2V (Power Supply Board) le maualuga o le tau o le taimi nei o le 3.6A.
Ole fa'amoemoe ole ola ole maa e 5 tausaga, peita'i e fautuaina e sui maa ile 4 tausaga pe itiiti pe a mana'omia.

Lisi Fa'amatalaga Fa'amau:

Komiti Fa'atonu

Terminal Legend	Galuega/Fa'amatalaga
L, N	Fa'afeso'ota'i le 220VAC, 50/60Hz i fa'amau nei: L i le vevela, N i le le tutusa.
+ DC -	AL400ACMCB220 - 12VDC @ 4A poʻo le 24VDC @ 3A i le ACM8CB laupapa. AL600ACMCB220 – 12VDC/24VDC @ 6A i le laupapa ACM8CB. AL1012ACMCB220 - 12VDC @ 10A i le laupapa ACM8CB. AL1024ACMCB220 - 24VDC @ 10A i le laupapa ACM8CB.
AC FAIL NC, C, NO	Fa'aoga e fa'ailoa ai le leiloa o le malosi ole AC, fa'ata'ita'iga fa'afeso'ota'i ile masini fa'alogo po'o le fa'ailo. E masani ona fa'aola le ta'avale pe a iai le mana AC. Fa'amatalaga fa'afeso'ota'i 1A @ 28VDC. Ole AC po'o le brown out e lipotia ile 1 minute ole mea na tupu. Faatuai lipoti e oo atu ile 6 itula. tipi "AC tuai" jumper ma toe seti le mana i le iunite.
PEA FAIL NC, C, NO	Fa'aaoga e fa'ailoa ai le tulaga maualalo o le maa, fa'ata'ita'iga fa'afeso'ota'i i le fa'ailo. E masani ona fa'aola le ta'avale pe a iai le mana DC. Fa'amatalaga fa'afeso'ota'i 1A @ 28VDC. E lipoti atu se maa ua aveese i totonu ole 5 minute. Ua lipotia le toe so'oga maa i totonu ole 1 minute. Ma'a maualalo tapulaa: 12VDC fa'aulufale fa'atutu fa'ata'atia @ e tusa ma le 10.5VDC (N/A mo AL1024AMCCB220), 24VDC fa'ailoga fa'aputuina @ e tusa ma le 21VDC (N/A mo AL1012AMCCB220).
+ BAT –	So'oga tūtū maa. AL400XB2V, AL600XB220 ma AL1012XB220 (Power Supply Board) le maualuga o le tau o le taimi nei o le 0.7A. AL1024XB2V (Power Supply Board) le maualuga o le tau o le taimi nei o le 3.6A.

ACM8CB Avanoa Pule Pule

Terminal Legend	Galuega/Fa'amatalaga
– Malosi +	12VDC po'o le 24VDC fa'aoga mai le laupapa sapalai eletise.
– Pulea +	E mafai ona fa'afeso'ota'i nei fa'amau i se tu'ueseese sapalai eletise e tu'u ese ai le mana fa'aogaina mo le ACM8CB (e tatau ona 'ave'esea le osooso J1 ma le J2).
TUSI FA'ASAO 1 – FA'AU 8 IN, GND	Mai mea e masani ona tatala ma/po'o le fa'agogo le aoina o mea e fa'aoso ai mea e fa'aoso ai (managa e alu i fafo fa'amau, alu i fafo pir's, ma isi).
GALUEGA 1 – GALUEGA 8 NC, C, LEAI, COM	12 i le 24 volts AC/DC fa'aoso fa'atonu galuega faatino: Fa'alole-Saogalemu [NC lelei (+) & COM Leaga (-)], Fa'aletonu-Saogalemu [LEAI lelei (+) & COM Leaga (-)], Ausilali galuega [C lelei (+) & COM Leaga (v)] (Pe a faʻaaogaina le eletise AC polarity e le manaʻomia ona mataʻituina), Faʻafesoʻotaʻi faʻaalia i se tulaga e le faʻaosoina.
FACP FA'ATASI T, + FA'AIGA –	Fa'aala afi fa'aoso fa'aulu mai FACP. E mafai ona tatala fa'aoso mea fa'aoso, e masani ona tapuni mai se va'aiga fa'atino a le FACP ( Ata 4 e oo i le 8, itulau 8-9).
FACP INTERFACE NC, C, NO	Pepa fa'afeso'ota'iga "C" fa'amauina @ 1A 28VDC mo fa'amatalaga fa'ailo.

Fa'ata'ita'iga masani

Diagnostics Taitaiina

Komiti Fa'atonu

LED		Tulaga Malosiaga
Mumu (DC)	lanu meamata (AC)	Tulaga Malosiaga
ON	ON	Tulaga masani o faʻagaioiga.
ON	TOTO	Ga'imau AC. Ma'a tu'u tu'u atu le mana.
TOTO	ON	Leai se DC output. Tulaga pu'upu'u po'o le mamafa o le vevela.
TOTO	TOTO	Leai se DC output.

Mumu (Pe'a)	Tulaga ma'a
ON	Tulaga masani o faʻagaioiga.
TOTO	Ua faaletonu maa/maualalo maa.

ACM8CB Avanoa Pule Pule

LED	ON	TOTO
LED 1 – LED 8 (Mula)	Fa'aola (s) fa'auluuluga.	(s) fa'aliliuga fa'avevela le malosi.
Trg (Munumea)	FACP fa'aoso fa'aosoina (tulaga fa'ailo).	FACP masani (tulaga e le o se fa'alaiga).

Ata 2 – ACMCB220 Fa'asologa Fa'asologa

FA'ATELE: Fa'amama le iunite a'o le'i tautuaina.
Mo le fa'aauauina o le puipuiga mai lamatiaga o le mu, sui fuse i le ituaiga tutusa ma le fua fa'atatau.

FA'ATELE: O ma'a tu'u tu'u e mafai ona fa'aaogaina e tatau ona fetaui ma le voltagu faatulagaga.

Ia tuu ese uaea fa'atapula'aina o le malosi mai le fa'atapula'aina o le malosi. Fa'aoga la'ititi le 0.25″ avanoa.

Fa'ata Fa'atasi

Ata. 3 Fa'aaoga so'oga fa'aaoga e lua (2) mea e tu'u ai le eletise tu'ufua:

Ata 4 Polarity toe fa'afo'i fa'aoga mai le FACP fa'ailo fa'avili va'aia (polarity o lo'o fa'asino ile tulaga fa'ailo):

Ata 5 E masani ona tatala: Fa'aulu ole FACP mea e fa'aoso ai:

Ata 6 E masani ona tatala FACP Latching fa'aoso fa'aulu ma toe setiina (O lenei galuega e le'i iloiloina e le UL):

Ata 7 E masani ona tapuni: Fa'aoga fa'aoso FACP e le o pipii:

Ata 8 E masani ona tapuni: Fa'amauina le fa'aulu ole FACP ma toe setiina (E le'i iloiloina e le UL lenei mea fa'atino):

AL1024AMCCB220 Pepa Galuega Fa'atatauina le Tele o le Ma'a

AL1024AMCCB220 fa'aogaina i totonu (tu'i-tu'i) __________ 0.35A
Tu'u i luga le fa'aaogaina o lo'o iai nei (tu'u i luma) __________ A
Taimi tu'itu'i mana'omia (itula) __________ H
E mana'omia le malosi o le ma'a mo le tu'i (A+B)*C __________ AH
AL1024AMCCB220 fa'aogaina o le eletise i totonu (Fa'alala) __________ 0.35A
Uta i le taimi nei le taumafaina (Fa'ailo) __________ A
Umi o le fa'ailo (Ilaitu, eample: 15 Min. = 0.25 Itula) (Fa'ailo) __________ H
E mana'omia le malosi o le ma'a mo le Fa'ailoga (E+F)*G __________ AH
Aofa'i fuafuaina le gafatia maa D+H __________ AH
E mana'omia le malosi o le ma'a I*1.8 (tulaga saogalemu) __________ AH

Fa'aaliga: AL1024AMCCB220 sapalai eletise ua mamanuina e galue ma maa e oo atu i le 65AH. Faamolemole ia matau, laina [I] e le tatau ona sili atu i le 36AH. E tatau ona fa'aitiitia le fa'aogaina o le taimi nei po'o le taimi tu'i ina ia fa'amalieina le mana'oga.

Ina ia iloa le tele o le maa fa'amolemole laina lapotopoto [J] i le lapo'a fa'atalata lata ane.

Fua Fa'amau

Fua Fa'amau (H x W x D fa'atatau):
15.5” x 12” x 4.5” (393.7mm x 304.8mm x 114.3mm)

Altronix e le nafa mo soʻo se faʻaoga sese.
140 58th Street, Brooklyn, Niu Ioka 11220 ISA | telefoni: 718-567-8181 | fesi: 718-567-9056
webnofoaga: www.altronix.com | imeli: info@altronix.com | Malosiaga Faamaonia
IIACMCB220 Fa'asologa F25U

Pepa / Punaoa

Altronix ACMCB220 Avanoa Pule Pule ma Sapalai Malosiaga [pdf] Fa'atonu Taiala
ACMCB220, AL1012AMCCB220, Pule Pulea Avanoa ma Sapalai Malosiaga, Pulea Malosiaga Avanoa, Pulea Malosiaga, ACMCB220, Pulea

Fa'asinomaga

Tusi Taiala

Faataʻitaʻi aofia ai

Ua umaview