CDTP2 Manuals & User Guides

CDTP2 Mains operated programmable  Room Thermostat Installation and Operation Guide Factory Default Settings High and Low Temp limitation: Off Keypad lock: Off Operating mode: Normal Temperature indicator: ˚C Frost protection: On (5˚C) HYS On: 0.4˚C HYS OFF: 0.0˚C Daylight Saving…

EPH CONTROLS CDTP2 Room Thermostat Product Information Specifications Model: CDTP2 Product: Room Thermostat Power supply / Input: 230VAC Power consumption: Operating Contacts: Volt Free Installation Instructions To install the CDTP2 Room Thermostat, follow the steps below: Make sure the power…

UFH10 Wiring CentreInstallation and Operation Guide Factory Default Settings Zone 9 Switch: UFH Zone 10 Switch: UFH Grey and Orange terminals of the UFH valve are electrically linked. If UFH valve is fitted, remove this link. Specifications Power supply: 230Vac…

CDTP2 Room Thermostat Hardwired Prior to setting the thermostat, it is neccessary to complete all required settings described in this section. Factory default settings Contacts: Volt Temperature indicator: °C Switching dierential: 0.4°C In built frost protection: 5°C Blue backlight activated…

CDTP2 Room Thermostat HardwiredInstruction Manual Boiler Plus CDTP2 Room Thermostat Hardwired Prior to setting the thermostat, it is neccessary to complete all required settings described in this section. CAUTION! Before commencing any work on the electrical connections, you must first…