Total TCS1075248

Total TCS1075248 600W 8Bar Direct Drive 24-Liter Air Compressor User Manual

Model: TCS1075248 | Brand: Total

1. Folasaga

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Total TCS1075248 600W 8Bar Direct Drive 24-Liter Air Compressor. Please read this manual thoroughly before operating the unit and keep it for future reference.

The Total TCS1075248 is a heavy-duty, direct-drive air compressor designed for industrial and workshop applications. It features a powerful 600W motor and an oil-free system, providing efficient and consistent compressed air for various pneumatic tools and equipment. Its 24-liter tank ensures a stable air supply and reduces motor cycling frequency.

2. Faatonuga Saogalemu

Ia mulimuli i taimi uma i le puipuiga o le saogalemu e faʻaitiitia ai le lamatiaga o le afi, eletise eletise, ma manuʻa a le tagata lava ia pe a faʻaaogaina lenei oloa.

  • Faitau le Tusi Ta'iala: Understand all operating instructions and warnings before use.
  • Puipuiga o Mata ma taliga: Always wear safety glasses and hearing protection when operating the compressor.
  • Fa'alelei talafeagai: Operate the compressor in a well-ventilated area. Do not block air vents.
  • Saogalemu Faaeletise: Ensure the power supply matches the compressor's requirements (220-240V, 50Hz). Use a grounded outlet and avoid using extension cords unless absolutely necessary and rated for the compressor's power.
  • Fa'amama avega: Never exceed the maximum operating pressure of 8 Bar. Ensure the pressure relief valve is functional.
  • Tausiga: Disconnect the power supply and release all air pressure from the tank before performing any maintenance or repairs.
  • Tamaiti ma tagata o lo'o va'aia: Keep children and unauthorized persons away from the operating compressor.
  • Maumau: Ensure the compressor is on a stable, level surface to prevent tipping.

3. Mea i totonu o le afifi

Fa'amautinoa o lo'o iai mea uma pe a uma ona tatala:

  • 1 x Total TCS1075248 600W 8Bar Direct Drive 24-Liter Air Compressor
  • Tusi Lesona a le Tagata (lenei pepa)

4. Vaega o Oloa

  • Malosiaga afi: 600W (0.8 HP) copper wire motor for reliable performance.
  • Direct Drive System: Ensures efficient and consistent air compression.
  • Gaioiina e leai se suauu: Reduces maintenance and eliminates oil contamination in compressed air.
  • Avanoa Tank Tele: 24-liter (6.3 Gallons) air tank for extended use and reduced cycling.
  • Tulaga Pio maualalo: E fa'agaoioia i le pe tusa ma le 60 dB, e talafeagai mo siosiomaga eseese.
  • Malosi maualuga: Delivers up to 8 Bar (116 PSI) of operating pressure.
  • feavea'i: Faʻapipiʻiina i uili mo le faʻaogaina faigofie.
  • Talosaga tele: Ideal for car repair, carpentry, and general industrial tasks.

5. Seti

Follow these steps to set up your air compressor:

  1. Tatalaina: Aveese ma le fa'aeteete le compressor mai lana afifiina. Siaki pe iai ni fa'aleagaina i le felauaiga.
  2. Attach Wheels and Feet: If not pre-assembled, attach the wheels and rubber feet to the compressor base using the provided hardware. Ensure they are securely fastened.
  3. Tu'uga: Position the compressor on a firm, level surface in a well-ventilated area. Ensure there is adequate space around the unit for air circulation.
  4. So'oga eletise: Connect the power cord to a grounded 220-240V, 50Hz electrical outlet. Ensure the power switch on the compressor is in the 'OFF' position before plugging it in.
  5. Initial Run (Break-in): For the first use, turn the pressure regulator to its lowest setting or open the drain valve slightly. Turn the compressor ON and allow it to run for 10-15 minutes without any air tools connected. This helps to properly seat the motor components.
Total TCS1075248 24-Liter Air Compressor

Image: Total TCS1075248 24-liter air compressor. It features a blue tank with two direct-drive motor units on top, a pressure gauge, and wheels for portability.

6. Fa'atonuga o Galuega

To operate your air compressor:

  1. Malosiaga: Ensure the compressor is plugged in and the power switch is in the 'ON' position. The motor will start and build pressure in the tank.
  2. Mata'ituina le mamafa: Observe the pressure gauge. The compressor will automatically shut off once the maximum pressure (8 Bar) is reached. It will restart when the pressure drops below a preset minimum.
  3. Adjust Output Pressure: Use the pressure regulator knob to set the desired output pressure for your air tool. The regulated pressure will be shown on the secondary gauge.
  4. Feso'ota'i le Meafaigaluega Ea: Attach your pneumatic tool to the quick-connect coupler on the air hose.
  5. Galuega: Use your air tool as required. The compressor will cycle on and off to maintain tank pressure.
  6. Tapē le eletise: When finished, turn the power switch to 'OFF'.
  7. Fa'avaivai: Disconnect the air tool and release any remaining air pressure from the tank by opening the drain valve or using an air blow gun until the gauge reads zero.

7. Tausiga

Regular maintenance ensures optimal performance and extends the life of your compressor. Always disconnect power before maintenance.

  • Drain Condensation (Daily/After Each Use): Open the drain valve located at the bottom of the air tank to release accumulated moisture. This prevents rust and corrosion inside the tank. Close the valve tightly after draining.
  • Clean Air Filter (Monthly or as Needed): Inspect the air filter for dust and debris. Clean it by tapping out loose dirt or using compressed air. Replace if heavily soiled or damaged. A clogged filter reduces efficiency.
  • Inspect Hoses and Connections (Regularly): Check all air hoses, fittings, and connections for leaks, cracks, or damage. Replace any worn or damaged parts immediately.
  • Fa'amamaina lautele: Keep the compressor clean and free of dust and debris. Wipe down the exterior with a damp ie. Aua le fa'aaogaina vaila'au malolosi.
  • Check Safety Valve: Periodically pull the ring on the safety relief valve to ensure it operates freely and is not obstructed.

8. Faʻafitauli

Va'ai le vaega lea mo fa'afitauli masani ma a latou fofo:

Fa'afitauliMafuaaga e ono tupuFofo
E le amata le CompressorNo power; tripped circuit breaker; faulty switchCheck power connection; reset breaker; contact service.
Compressor runs continuously or cycles too frequentlyAir leak in tank or connections; faulty pressure switchCheck for leaks (use soapy water); tighten connections; contact service.
Mamafa maualalo o le ea e alu ese mai aiClogged air filter; air leak; pressure regulator set too lowClean/replace air filter; check for leaks; adjust pressure regulator.
Le pisapisao tele po o le vibrationLoose components; worn motor bearings; unstable surfaceCheck and tighten fasteners; place on stable surface; contact service for internal issues.
Moisture in air outputTank not drained regularly; high humidityDrain tank daily; use an in-line air dryer if needed.

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact customer support.

9. Fa'amatalaga

Numera Fa'ata'ita'iTCS1075248
Fa'ailogaAofa'iga
Malosiaga Ulufale600W (0.8 HP)
Voltage220-240V ~ 50Hz
Tank Capacity24 Lita (6.3 Kalone)
Ole Masi Fa'atino8 Pa (116 PSI)
Saosaoa Leai se Uta1440 rpm
Tulaga Pio60 dB
Ituaiga afiDirect Drive, Copper Wire
Lubrication SystemE leai se suauu
Fua o Mea (L x W x H)57 x 28 x 58 cm
LanuLanu moaga
Fa'aoga FautuainaCar repair, carpentry, industrial use

10. Fa'amaonia ma Lagolago

This Total TCS1075248 Air Compressor is designed for durability and performance. For specific warranty details, please refer to the warranty card included with your purchase or contact Total customer service.

For technical support, spare parts, or service inquiries, please contact your local Total dealer or authorized service center. Always provide the model number (TCS1075248) when seeking support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.