Erbauer EAG18-115

Tusitaiala Fa'aoga a le Erbauer 18V Brushless Angle Grinder EAG18-Li 115mm

Model: EAG18-115

1. Folasaga ma Fa'amatalaga Saogalemu

This manual provides essential information for the safe and efficient operation of your Erbauer 18V Brushless Angle Grinder. Please read all instructions carefully before use to prevent injury and ensure proper tool function. Keep this manual for future reference.

Lapataiga Lautele mo le Saogalemu

  • Always wear eye protection, hearing protection, and suitable gloves when operating the grinder.
  • Ia mautinoa o lo'o fa'amau lelei le mea faigaluegaamped before grinding.
  • Keep hands and body clear of the rotating disc.
  • Do not use damaged or incorrect accessories.
  • Tatala le pusa maa a'o le'i faia ni fetuutuuna'iga, sui mea faigaluega, po'o le teuina o le meafaigaluega.

2. Vaega o oloa

Familiarize yourself with the parts of your Erbauer Angle Grinder:

Erbauer 18V Brushless Angle Grinder EAG18-Li 115mm with side handle attached.

An image showing the Erbauer 18V Brushless Angle Grinder, model EAG18-Li 115mm. The tool is blue and black with a silver head, featuring a red power button and a black and blue side handle attached.

  1. Tino olo
  2. Fa'amau Loka Spindle
  3. Ki/Ope Suiga
  4. 'Au' au
  5. Leoleo Puipui
  6. Tisiki olo (e le o aofia ai)
  7. Battery Port (battery not included)

3. Seti ma Fonotaga

3.1 Fa'apipi'i ma'a

This tool operates with an Erbauer 18V battery pack (sold separately). Ensure the battery is fully charged before use.

  1. Align the battery pack with the battery port on the grinder.
  2. Fa'ase'e le ma'a i totonu se'ia oomi lelei.
  3. Ina ia aveese, oomi le faamau tatala maa ma se'e ese le maa i fafo.

3.2 Fa'apipi'i le U'u Itu

The side handle can be attached to either side of the grinder head for optimal control.

  • Screw the side handle clockwise into one of the threaded holes on the grinder head until it is tight.

3.3 Installing the Protective Guard

The protective guard must always be used to shield against sparks and debris.

  • Tatala le leoleo clampfa'avili.
  • Position the guard to cover the grinding disc and direct sparks away from you.
  • Fa'amau le clampu faovilivili mau

3.4 Mounting the Grinding Disc

Use only 115mm diameter grinding or cutting discs rated for the grinder's maximum RPM.

  1. Oomi ma uu le faamau loka spindle.
  2. Unscrew the outer flange using the provided spanner.
  3. Place the grinding disc onto the inner flange, ensuring it sits correctly.
  4. Screw the outer flange back on and tighten it firmly with the spanner while holding the spindle lock button.
  5. Tatala le faamau loka spindle.

4. Fa'atonuga o Galuega

4.1 Fa'aola i luga/Pepe

  • To turn on: Slide the On/Off switch forward.
  • To turn off: Slide the On/Off switch backward to the OFF position.

4.2 Metotia o le oloina

  • Hold the grinder firmly with both hands, one on the main handle and one on the side handle.
  • Fa'ataga le tisiketi e o'o i le saosaoa atoatoa a'o le'i fa'afeso'ota'i le mea faigaluega.
  • Apply light, even pressure. Do not force the tool, as this can cause kickback or damage the disc.
  • Maintain a shallow angle (typically 15-30 degrees) between the disc and the workpiece for grinding. For cutting, use a cutting disc and hold the tool perpendicular to the workpiece.
  • Move the grinder smoothly across the surface to ensure an even finish and prevent overheating.

5. Tausiga ma Teuina

5.1 Fa'amamāina

  • Aveese i taimi uma le pusa maa aʻo leʻi faʻamamaina.
  • Ia fa'amamā soo avanoa e fa'aoso ai le ea e puipuia ai le fa'aputuina o le pefu, lea e ono i'u ai i le vevela tele. Fa'aaoga le ea fa'asusu pe a maua.
  • Solo le pito i fafo o le meafaigaluega i se vai vaivai.amp ie. Aua ne'i fa'aogaina vaila'au malolosi po'o ni mea fa'amama.

5.2 Teuina

  • Store the grinder in a dry, secure location, out of reach of children.
  • Aveese le maa mai le meafaigaluega a'o le'i teuina mo se taimi umi.
  • Protect the tool from direct sunlight and extreme temperatures.

6. Faʻafitauli

Fa'afitauliMafuaaga e ono tupuFofo
E le amata le mea oloBattery not charged; Battery not inserted correctly; On/Off switch not fully engaged.Charge battery; Reinsert battery securely; Ensure switch is in ON position.
Tete teleDamaged or unbalanced disc; Disc not properly mounted; Loose side handle.Replace disc; Re-mount disc correctly, ensuring flanges are tight; Tighten side handle.
Fa'aitiitia fa'atinogaBattery low; Worn disc; Overheating.Recharge battery; Replace disc; Allow tool to cool down, clean ventilation slots.

7. Fa'amatalaga Fa'apitoa

  • Fa'ailoga: Erbauer
  • Fa'ata'ita'iga: EAG18-115
  • Voltage: 18 Volts
  • Tisiki lapoa: 115 mm
  • Malosiaga: 72 Watts
  • Mea: Uamea
  • Lanu: Lanu moaga
  • ASIN: B0C7JWVC1F

8. Fa'amaonia ma Lagolago

This Erbauer product is covered by the manufacturer's standard warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Erbauer website. For technical support, spare parts, or service inquiries, please contact Erbauer customer service through their official channels.

Mo nisi fa'amatalaga, e mafai ona e asiasi i le Erbauer brand page on Amazon.

© 2023 Erbauer. All rights reserved.