tusi lesona+

Fuse The Side Kick

Fuse Reel The Side Kick Collapsible Charger Organizer Instruction Manual

1. Folasaga

The Fuse Reel The Side Kick is a collapsible charger organizer designed to streamline cable management for your MacBook and PC charging cords. It provides a compact and organized solution for both travel and daily use, preventing tangled cables and protecting your charger.

Fuse Reel The Side Kick attached to a white charger, neatly organizing the cable.

Image 1.1: The Side Kick attached to a charger, demonstrating compact cable organization.

A hand placing a charger with The Side Kick attached into a bag, illustrating its portability.

Image 1.2: The Side Kick making a charger compact for travel.

2. Fegalegaleai

The Side Kick is compatible with a wide range of chargers, including Apple Chargers (60W, 61W/67W USB-C, 70W, 85W, 87W/96W USB-C, 140W Magsafe) and various PC chargers. It is designed to fit charging bricks larger than 2.5 x 2.5 inches (65 x 65 mm).

Taua: Not recommended for charging bricks smaller than 2.5 x 2.5 inches (65 x 65 mm).

Sizing guide showing compatible chargers (over 2.5 inches) and incompatible chargers (under 2.5 inches).

Image 2.1: Visual guide for charger compatibility based on size.

3. Seti ma Fa'apipi'i

Follow these steps to attach The Side Kick to your compatible charger:

  1. La'ei mama: Ensure the surface of your charger brick is clean and dry before application.
  2. Fa'apipi'i mea fa'apipi'i: Peel off the protective backing from the adhesive pad on The Side Kick.
  3. Tulaga: Carefully align The Side Kick with one side of your charger brick. Ensure the 'PUSH' button is facing outwards.
  4. Saogalemu: Press firmly to secure The Side Kick to the charger. Allow the adhesive to set for a few minutes before use.
A hand demonstrating the pop-out mechanism of The Side Kick from a charger.

Image 3.1: The Side Kick's pop-out mechanism for cable winding.

Diagram showing three steps: 1. Stick it, 2. Pop it, 3. Wind it, with instructions for removal and slack.

Image 3.2: Step-by-step visual guide for attaching and winding the cable.

4. Fa'atonuga o Galuega

Once attached, The Side Kick simplifies cable management:

  1. Extend for Winding: Gently press the 'PUSH' button on The Side Kick to extend the winding mechanism.
  2. Wind Cable: Begin winding your charging cable around the extended mechanism. The Side Kick replaces traditional adapter clips and allows for quick winding.
  3. Secure Cable Ends: Utilize the integrated 'Snotch' cable latch to secure the ends of your cable, preventing unraveling and damage.
  4. Adjust Cable Length: The design allows you to adjust the exposed cable length, using only what you need.
  5. Retract for Storage: Once the cable is wound, gently push the mechanism back into its collapsed position for compact storage.
A hand adjusting the length of a charging cable wound around The Side Kick, connected to a laptop.

Image 4.1: Adjusting cable length for optimal setup.

5. Vaega

  • Fuafuaga e mafai ona malepe: The Side Kick collapses to a slim 5mm when not in use, ensuring minimal bulk.
  • 'Snotch' Cable Latch: A trademarked and patented cable latch keeps your cable organized and protected from damage.
  • Quick Winding: Enables rapid winding of your charging cable in under 5 seconds.
Images showing The Side Kick in both extended and collapsed states, highlighting its slim profile.

Image 5.1: The Side Kick's collapsible design and 'Snotch' cable latch.

6. Tausiga

To ensure the longevity and optimal performance of your Side Kick:

  • Fa'amamaina: Wipe the device with a soft, dry cloth to remove dust or debris. Avoid harsh chemicals.
  • Tausiga fa'apipi'i: If the adhesive loses its stickiness over time, use the provided extra adhesive pad for re-attachment.
  • Teuina: Teu i se nofoaga malulu, matutu mamao ese mai le susulu o le la po o le vevela tele.

7. Faʻafitauli

If you encounter any issues with your Side Kick, consider the following:

  • Adhesive Not Sticking: Ensure the charger surface is clean and dry. Apply firm pressure during initial attachment. Use the spare adhesive if needed.
  • Cable Not Winding Smoothly: Check for any kinks or twists in the cable before winding. Ensure the winding mechanism is fully extended.
  • Incompatible Charger: Verify that your charger brick meets the size requirements (larger than 2.5 x 2.5 inches).

8. Fa'amatalaga

  • Fa'ailoga: Fuse
  • Numera Fa'ata'ita'i: FUSE-SK-WHT
  • Mea mamafa: 0.95 aunese
  • Fua o Mea: 2.7 x 2.7 x 0.4 inisi
  • Lanu: Lanu pa'epa'e
  • Mea: Plastic Aluminium
  • Fa'apitoa Fa'apitoa: Malaga
  • Vaega e aofia ai: Fa'apipi'i

9. Fa'amaonia ma Lagolago

The Fuse Reel The Side Kick is backed by the manufacturer's warranty. For specific warranty details, product support, or any inquiries, please refer to the official Fuse Reel webnofoaga po'o fa'afeso'ota'i sa'o a latou 'au'aunaga fa'atau. Taofi lau lisiti fa'atau mo tagi fa'amaonia.