ECOELER 6-inch Dimmable LED Disk Light Instruction Manual

1. About Your ECOELER LED Disk Light

The ECOELER 6-inch Dimmable LED Disk Light is a high-quality, energy-efficient lighting solution designed for various indoor applications. This fixture provides bright, warm white illumination and features a low-profile design for seamless integration into your ceiling.

• Tulaga maualuga: Features a 7.3-inch round metal light cover for corrosion protection and rust prevention. Equipped with high-quality LED chips, it delivers 1000 lumens at 16.5 watts, ensuring well-balanced light with no flickering and an estimated lifespan of 50,000 hours.
• Smooth Dimmable: Offers a full range of seamless dimming from 5% to 100%, allowing precise control over brightness for any situation, from a soft night glow to bright task lighting.
• Low Profile Fuafuaga: The ultra-thin 0.9-inch design provides a sleek look, ideal for spaces with low ceilings or for achieving a modern aesthetic.
• Talosaga lautele: E talafeagai mo oamp locations, making it perfect for entrances, living rooms, bedrooms, kitchens, dens, and covered outdoor areas.
• Saogalemu Faamautinoa: ETL and FCC listed, ensuring compliance with safety and quality standards.

2. Mea i totonu o le afifi

Fa'amautinoa o lo'o iai vaega uma a'o le'i amata fa'apipi'i:

• LED Disk Light Fixture (4 units)
• E26 Adapter and Spring Clips
• Installation Screws (Short and Long)
• Nati Nati
• Tusi Taiala

3. Fa'amatalaga Saogalemu

Please read and understand all instructions before installing or operating this product. Failure to do so may lead to electric shock, fire, or other hazards that could cause injury or property damage.

• LAPATAIGA: Tulaga lamatia o le te'i eletise. Ta'e le eletise i le fuse po'o le ta'avale a'o le'i fa'apipi'i po'o le tautua.
• LAPATAIGA: Risk of fire. Use only in circuits rated for 120V AC.
• O lenei oloa e tatau ona faʻapipiʻi e tusa ai ma le tulafono faʻapipiʻi talafeagai e se tagata e masani i le fausiaina ma le faʻaogaina o le oloa ma lamatiaga o loʻo aʻafia ai.
• Ensure all electrical connections are secure and correct.
• Do not modify the fixture or use it for any purpose other than its intended use.
• Aua ne'i tagolima lima susu.
• E talafeagai mo oamp nofoaga.

4. Fa'atonu Fa'atonu

The ECOELER LED Disk Light can be installed into either a standard junction box or a recessed can (5-inch or 6-inch).

4.1. Junction Box Installation

1. tape le paoa: Ia mautinoa ua motusia le eletise i le circuit breaker a'o le'i amataina.
2. Aveese le tioata: Gently twist the light lens counter-clockwise to remove it from the fixture base.
3. Feso'ota'i uaea: Connect the supply wires from the junction box to the fixture wires using the provided wire nuts (black to black, white to white, ground to ground).
4. Attach fixture to junction box: Align the fixture base with the junction box and secure it using the provided screws.
5. Reattach lens: Twist the lens clockwise onto the fixture base until secure.
6. Toe fa'afo'i le mana: Toe ki le paoa i le motumotu o le matagaluega.

4.2. Recessed Can Installation

1. tape le paoa: Ia mautinoa ua motusia le eletise i le circuit breaker a'o le'i amataina.
2. Aveese le tioata: Gently twist the light lens counter-clockwise to remove it from the fixture base.
3. Install E26 adapter: Screw the E26 adapter into the existing recessed can socket.
4. Feso'ota'i uaea: Connect the fixture wires to the E26 adapter wires using the provided wire nuts (black to black, white to white).
5. Install spring clips: Attach the spring clips to the designated slots on the fixture base.
6. Push disk into can: Carefully push the LED disk light into the recessed can until the spring clips hold it securely in place, flush with the ceiling.
7. Reattach lens: Twist the lens clockwise onto the fixture base until secure.
8. Toe fa'afo'i le mana: Toe ki le paoa i le motumotu o le matagaluega.

5. Fa'atonuga o Galuega

The ECOELER LED Disk Light is designed for simple operation and offers smooth dimming capabilities.

5.1. Kiina/Tape

Fa'agaoioi le moli e fa'aaoga ai se ki masani i le puipui e feso'ota'i i le matagaluega o le moli.

5.2. Galuega Fa'apa'u

This fixture is compatible with most standard LED dimmers, allowing for smooth brightness adjustment from 5% to 100%. To dim the light, use a compatible dimmer switch (not included) installed in your electrical system.

6. Tausiga

The ECOELER LED Disk Light requires minimal maintenance.

• Fa'amamaina: Mo le fa'amamāina o le masini, ia mautinoa ua tape le eletise. Faaaoga se mea vaivai, mago, pe sina mea manifinifi.amp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the finish or electrical components.
• Leai ni vaega e mafai ona fa'aaogaina e tagata fa'aoga: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the fixture.

7. Faʻafitauli

If you experience issues with your ECOELER LED Disk Light, refer to the following common problems and solutions:

If problems persist, contact ECOELER customer support for assistance.

8. Fa'amatalaga

9. Fa'amaonia ma Lagolago

ECOELER products are designed for quality and durability. This product comes with a limited warranty.

• Fa'amaonia: Refer to the product packaging or ECOELER's official webnofoaga mo tuutuuga ma aiaiga ma'oti.
• Lagolago tagata fa'atau: If you encounter any problems during use or have questions regarding installation or operation, please contact ECOELER customer service. We aim to provide a reply within 24 hours.