Folasaga
The StarTech.com SV431DHD4KU is a 4-port Dual Monitor HDMI KVM Switch designed to control four HDMI-enabled computers from a single console (keyboard, mouse, and two monitors). This device supports resolutions up to 4K 30Hz and includes a built-in 2-port USB 3.0 hub for sharing peripherals, as well as 3.5mm audio ports for independent audio control.
O mea o lo'o i totonu
- 1x SV431DHD4KU 4-Port Dual Monitor HDMI KVM Switch
- 1x Ta'iala Amata vave
- 4x Pa'u Vae
- 1x Universal Power Adapter (NA/JP, UK, EU, ANZ)
Ata o oloa
Laupapa luma
- HID USB Port: Connect your keyboard or mouse.
- USB 3.0 Taulaga: Connect USB 3.0 peripherals.
- Computer Selection Buttons (1-4): Press to switch to the corresponding computer.
- Fa'ailoga Malosi: Illuminates when the KVM switch is powered on.
Laufanua Tua
- DC 9-12V Power Input: Fa'afeso'ota'i le feso'ota'iga eletise e aofia ai.
- Taulaga Console:
- 2x USB HID Ports (Keyboard/Mouse)
- 2x USB 3.0 Taulaga
- 2x 3.5mm Audio Out (Speakers)
- 2x 3.5mm Audio In (Microphone)
- PC Input Ports (PC1-PC4): Each computer requires:
- 2x HDMI Input Ports
- 1x USB 3.0 Input Port
- 1x 3.5mm Audio Out (from PC)
- 1x 3.5mm Audio In (to PC)
Seti ma Fa'apipi'i
Follow these steps to connect your KVM switch and computers:
- Tape Masini Uma: Ensure all computers, monitors, and the KVM switch are powered off and unplugged.
- Connect Console Devices: Connect your keyboard and mouse to the HID USB ports on the KVM's console side. Connect your two HDMI monitors to the console HDMI output ports. Connect your speakers and microphone to the 3.5mm audio ports on the console side.
- Connect Computers: For each computer (PC1 to PC4):
- Connect two HDMI cables from the computer's video output to the corresponding HDMI input ports on the KVM switch (e.g., PC1 HDMI 1 and PC1 HDMI 2).
- Connect a USB 3.0 cable from the computer's USB port to the corresponding USB 3.0 input port on the KVM switch (e.g., PC1 USB 3.0).
- Connect 3.5mm audio cables from the computer's audio output and input to the corresponding audio ports on the KVM switch (e.g., PC1 Audio Out and PC1 Audio In).
- Fesoʻotaʻi le Mana: Plug the universal power adapter into the DC 9-12V input on the KVM switch, then plug the adapter into a power outlet.
- Malosiaga: Power on the KVM switch, then power on your monitors, and finally power on your connected computers.
Fa'agaioiga
Switching Computers
You can switch between connected computers using the front panel buttons or keyboard hotkeys.
- Fa'amau pito i luma: Press the corresponding numbered button (1-4) on the front panel of the KVM switch to select the desired computer.
- Keyboard Hotkeys: Use specific key combinations on your connected keyboard to switch between computers. Refer to the Quick-Start Guide for the exact hotkey sequences.
USB 3.0 Hub Functionality
The KVM switch features a 2-port USB 3.0 hub on the console side. Any devices connected to these ports will automatically switch to the currently selected computer, allowing for shared access to peripherals like external hard drives, webcams, or printers.
Fetufa'aiga leo
The 3.5mm audio ports provide independent analog audio switching. Your speakers and microphone connected to the console will switch along with the selected computer, providing full multimedia control.
Fa'amatalaga
| Fa'aaliga | Fa'amatalaga |
|---|---|
| Fa'ata'ita'iga | SV431DHD4KU |
| Fa'ailoga | StarTech.com |
| Numera o Taulaga | 4 |
| Ata Vitio i luga | HDMI (Dual Monitor) |
| I'uga maualuga | 4K 30Hz |
| USB Hub | 2-Tau USB 3.0 |
| Leo | 3.5mm Stereo Audio (In/Out) |
| Metotia Pulea | Push Button, Hotkeys |
| Mea | Uamea |
| Fua (L x W x H) | 8.7 x 5.1 x 2.5 inisi (22.1 x 13.0 x 6.4 cm) |
| Mea mamafa | 2.73 pauna (1.24 kilokalama) |
| Fetuunaiga Malosi | DC 9-12V, 1.5A (18W) |
| Galulue Vevela | 0°C i le 40°C (32°F i le 104°F) |
Fa'afitauli
- Leai se Ata Vitio:
- Ensure all HDMI cables are securely connected between the computers, KVM, and monitors.
- Verify that the KVM switch is powered on and the correct computer port is selected.
- Check monitor input settings to ensure they are set to the correct HDMI input.
- Try using different HDMI cables or connecting monitors directly to a computer to rule out cable or monitor issues.
- E lē tali mai le Keyboard/Isumu:
- Ensure the keyboard and mouse are connected to the dedicated HID USB ports on the KVM console.
- Verify that the USB cables from the computers to the KVM are securely connected.
- Some advanced keyboards/mice may require connection to the USB 3.0 hub ports instead of HID ports for full functionality.
- Restart the KVM switch and computers.
- Fa'afitauli Fa'alogo:
- Check all 3.5mm audio cable connections.
- Ensure audio output/input settings on the selected computer are configured correctly.
- Verify speaker and microphone connections and functionality.
- USB 3.0 Devices Not Detected:
- Ensure the USB 3.0 cables from the computers to the KVM are connected.
- Some high-power USB 3.0 devices may require an external power source.
- Taofi le masini i se si'osi'omaga malūlū ma mago, 'alo'ese mai le la sa'o ma mea e maua ai le vevela.
- Fa'amamā le pito i fafo i se ie vaivai ma mago. 'Alo'ese mai le fa'aaogaina o vaila'au malolosi po'o ni mea fa'amama e fa'amama ai.
- Ia fa'amautinoa le sa'o o le ea fa'alelei faataamilo i le iunite e puipuia ai le so'ona vevela.
Tausiga
To ensure the longevity and optimal performance of your KVM switch:
Fa'amaonia ma Lagolago
This StarTech.com SV431DHD4KU KVM Switch is backed by a 2-Tausaga Fa'amaonia.
For technical support, product information, or to access drivers and manuals, please visit the official StarTech.com webnofoaga po'o fa'afeso'ota'i sa'o a latou lagolago fa'atau.
Ua Umaview Vitio
Matamata i le vitio lenei mo se faʻamatalagaview of the StarTech.com 4-Port Dual Monitor HDMI KVM Switch, highlighting its features and benefits.