Secukey SK4-W Standalone Access Control System

1. Folasaga

This user manual provides comprehensive instructions for the installation, operation, and maintenance of the Secukey SK4-W Standalone Access Control System. Please read this manual carefully before installation and use to ensure proper functionality and safety.

The Secukey SK4-W is a robust, IP66-rated access control device designed for outdoor use, featuring RFID card and PIN code access. It is an ideal solution for securing doors, gates, and other entry points.

2. Oloa Ua Ovaview

2.1 Vaega Autu

• IP66 Waterproof and Anti-Vandal Design: Suitable for harsh outdoor environments.
• Tele Avanoa Faiga: Supports RFID card only, PIN code only, or Card + PIN for enhanced security.
• Malosiaga Maualuga a le Tagata Fa'aoga: Manages up to 1000 users.
• Integrated Relay: Built-in NO, NC, Com relay for direct door lock control.
• Adjustable Output Times: Programmable lock output time (1-99 seconds) and alarm output time (1-3 minutes).
• Wiegand 26-bit Interface: Supports external Wiegand readers, exit buttons, and alarms.
• Latch Mode: Allows the door or gate to remain open.
• Lautele Voltagu lautele: Operates on 12~28V AC/DC.
• Fa'aola Keypad: Faʻamautinoa le vaʻaia i tulaga maualalo le malamalama.
• Fausiaga Tumau: Zinc alloy casing with powder coating.

2.2 Vaega e Aofia ai

• 1 x Secukey SK4-W Standalone Access Control Device (RFID/PIN)
• 1 x Master Add Card
• 1 x Master Delete Card
• 1 x Tusi Fa'aoga

2.3 Oloa Views

Ata 1: Luma view of the SK4-W unit, highlighting the keypad and Secukey branding.

Ata 2: Fa'afagota view of the SK4-W, providing a perspective of its slim profile.

Ata 3: Itu view of the SK4-W unit.

Ata 4: O le isi itu view of the SK4-W unit.

Ata 5: Tua view of the SK4-W unit, displaying the integrated wiring for installation.

3. Seti ma Fa'apipi'i

3.1 Fa'apipi'i le Masini

The SK4-W is designed for surface mounting. Choose a secure location near the door or gate, ensuring it is within reach for users and protected from direct impact. Use appropriate screws and wall plugs for the mounting surface.

3.2 Ata uaea

The device requires a 12~28V AC/DC power supply (not included). Connect the wires according to the diagram provided in the full manual. Ensure all connections are secure and insulated to prevent short circuits.

• Malosiaga Ulufale: Connect to 12~28V AC/DC power source.
• Lock Output (NO/NC/COM): Connect to your electric lock.
• Faʻasalaga ala: Connect to an external alarm system (if applicable).
• Wiegand In/Out: For connecting external Wiegand readers or other Wiegand devices.
• Ki fafo: Connect a push-to-exit button for convenient egress.

For detailed wiring schematics, please refer to the comprehensive wiring diagram included in the product packaging.

4. Fa'atonuga o Galuega

4.1 Initial Setup and Master Cards

Upon first power-up, the device will be in factory default mode. Use the included Master Add Card and Master Delete Card to manage user access.

• Faʻaopopoina Tagata Faʻaoga: Present the Master Add Card, then present the new user's RFID card or enter their PIN.
• Ave'esea tagata fa'aoga: Present the Master Delete Card, then present the user's RFID card or enter their PIN to be deleted.

4.2 Access Modes

The SK4-W supports three primary access modes:

1. Card Only Mode: Users gain access by presenting a valid RFID card.
2. PIN Only Mode: Users gain access by entering a valid 4-6 digit PIN code.
3. Card + PIN Mode: Users must present a valid RFID card and then enter their corresponding PIN code for access. This mode offers the highest security.

Refer to the full programming guide for instructions on how to switch between access modes and manage user PINs.

4.3 Visitor PINs

The SK4-W supports up to 10 visitor PINs, which can be set to be valid for 1 to 10 uses. This feature is useful for temporary access for guests or service personnel.

Figure 6: The SK4-W supports visitor PINs and is IP66 waterproof, suitable for outdoor installation.

4.4 Latch Mode

The latch mode allows the door or gate to remain unlocked for an extended period, which can be useful during peak hours or for maintenance. Consult the programming manual for activation and deactivation procedures.

5. Tausiga

The Secukey SK4-W is designed for minimal maintenance due to its robust construction and IP66 rating. However, regular checks can prolong its lifespan and ensure optimal performance.

• Fa'amamaina: Wipe the keypad and casing ma le malu, oamp ie. Aloese mai mea fa'amama fa'amama po'o so'o.
• Siaki So'oga: Periodically inspect wiring connections for any signs of wear, corrosion, or loosening.
• Faʻalauiloa Firmware: Siaki le gaosi oloa web'upega tafaʻilagi mo soʻo se faʻafouga o le firmware o loʻo avanoa.

Figure 7: The SK4-W is designed to withstand extreme operating temperatures, from -40°C to 60°C.

6. Faʻafitauli

If the problem persists, please contact Secukey technical support for assistance.

Figure 8: Wiegand 26-bit input and output signal timing diagram.

7. Fa'amatalaga

8. Fa'amaonia ma Lagolago

Secukey products are manufactured to high quality standards. For warranty information and technical support, please refer to the warranty card included with your product or visit the official Secukey webnofoaga.

Fa'amatalaga Fa'afeso'ota'i:

• Tufuga: Secukey
• Webnofoaga: www.secukey.com (Esoample so'oga, so'oga moni e mafai ona 'ese'ese)
• Auaunaga i tagata: Va'ai ile afifiina o oloa po'o website for regional support contacts.

Fa'amolemole taofi lau fa'amaoniga o le fa'atau mo tagi fa'amaonia.