Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer User Manual

1. Folasaga

This manual provides essential information for the safe and efficient operation of your Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer. This printer is designed for various label printing applications, offering both thermal transfer and direct thermal printing capabilities at 203 dpi resolution. It features an LCD display for easy navigation, a tear-off function, a real-time clock, and multiple connectivity options including USB 2.0, two USB host ports, and LAN.

Figure 1: Intermec PC43TB01100201 Thermal Transfer/Direct Thermal Desktop Printer. This image shows the compact desktop printer with its LCD display and label output slot.

2. Fa'amatalaga Saogalemu

Please read all safety instructions before operating the printer to prevent injury or damage to the device. Keep this manual for future reference.

• Faaaoga na'o le uaea eletise na sau faatasi ma le masini lolomi.
• Aua ne'i fa'aalia le masini lomitusi i le vai pe susū tele.
• Ia mautinoa o lo'o tu'u le masini lomitusi i luga o se mea mautu ma tutusa.
• Aloese mai le poloka o avanoa e savili ai.
• Disconnect power before cleaning or servicing the printer.
• Do not attempt to open or repair the printer yourself. Refer to qualified service personnel.

3. Mea i totonu o le afifi

Fa'amautinoa o lo'o iai mea uma i totonu o le afifi:

• Intermec PC43TB01100201 Printer Unit
• US Power Cord
• Quick Start Guide (e le o aofia i lenei tusi lesona)
• Software/Driver CD (may vary by package)

4. Seti

4.1 Ta'ese'ese ma Tu'u

1. Aveese ma le faaeteete le lomitusi mai lona afifiina.
2. Place the printer on a flat, stable surface with adequate ventilation.
3. Ensure easy access to power outlets and computer ports.

4.2 Mana Feso'ota'i

1. Connect the supplied US power cord to the printer's power input.
2. Fa'afeso'ota'i le isi pito o le uaea eletise i se so'o eletise ua fa'avae.

4.3 Fesoʻotaʻi i se Komepiuta

The PC43TB01100201 printer supports USB and LAN connectivity.

• So'oga USB: Connect a USB cable (not always included) from the printer's USB 2.0 port to an available USB port on your computer.
• LAN So'oga: Connect an Ethernet cable (not always included) from the printer's LAN port to your network router or switch.

4.4 Loading Media (Labels/Ribbon)

Refer to the printer's internal diagrams or quick start guide for specific instructions on loading labels and, if using thermal transfer, the ribbon. Ensure the media is correctly aligned for proper printing.

• Tatala le ufiufi lomitusi.
• Place the label roll onto the media supply spindle.
• Feed the labels through the media guides.
• If using thermal transfer, install the ribbon according to the printer's instructions.
• Tapuni le ufiufi lomitusi.

5. Fa'atonuga o Galuega

5.1 Fa'aola i luga/Pepe

• I le Malosiaga: Press the power button located on the printer. The LCD display will illuminate.
• Tape le Malosi: Press and hold the power button until the printer shuts down.

5.2 Fa'aaogaina o le Fa'aaliga LCD

The LCD display provides status information and allows for configuration changes. Navigate through menus using the control buttons (Push Button Controller Type) adjacent to the display.

• View printer status and error messages.
• Adjust settings such as print darkness, speed, and media type.
• Perform calibration for new media rolls.

5.3 Lomitusi

Once the printer is connected to your computer and drivers are installed, you can print labels from compatible software applications. The printer supports Latin fonts.

1. Open your label design software or application.
2. Create or open the label design.
3. Select the Intermec PC43TB01100201 as your printer.
4. Adjust print settings as needed (e.g., number of copies, print quality).
5. Amata le galuega lolomi.

The printer features a tear-off function for easy label separation after printing.

6. Tausiga

6.1 Fa'amama le Lomitusi

O le fa'amamāina masani e fesoasoani e fa'atumauina ai le lelei o le lolomi ma fa'aumiumi ai le umi e ola ai le lomitusi.

• Lomitusi: Clean the printhead with an alcohol swab or printhead cleaning wipe when print quality degrades or after every few media roll changes. Ensure the printer is off and cool.
• Fa'aili Platen: Clean the platen roller with an alcohol swab to remove adhesive residue or dust.
• fafo: Solo le pito i fafo i se malu, oamp ie. Aua le fa'aogaina ni mea e fa'amama ai.

6.2 Replacing Media and Ribbon

Replace media rolls and thermal transfer ribbons as they run out. Follow the loading instructions in Section 4.4.

7. Faʻafitauli

This section addresses common issues you might encounter. For more complex problems, contact Intermec support.

• Le Lomitusi Le Tali:
  • Siaki feso'ota'iga eletise.
  • Verify USB or LAN cable connections.
  • Restart the printer and computer.
  • Ensure printer drivers are correctly installed.
• Le lelei Lomiga:
  • Clean the printhead (refer to Section 6.1).
  • Adjust print darkness settings via the LCD display or printer driver.
  • Ensure correct media type is selected.
  • Check if the ribbon (for thermal transfer) is correctly installed and not depleted.
• Fa'ailoga e Le o Fafaga Sa'o:
  • Reload media, ensuring it is properly aligned in the guides.
  • Calibrate the printer for the loaded media type.
  • Siaki mo so'o se mea e fa'alavelave ai i le ala o ala o faasalalauga.
• LCD Display Error Messages:
  • Consult the printer's on-screen help or the full user manual for specific error code meanings and resolutions.

8. Fa'amatalaga

9. Fa'amaonia ma Lagolago

For detailed warranty information, please refer to the documentation provided with your purchase or contact your reseller. Intermec provides support for its products.

• Tufuga: Intermec
• Numera Fa'ata'ita'i: PC43TB01100201
• For technical assistance, visit the official Intermec support webnofoaga po'o fa'afeso'ota'i la latou 'au'aunaga fa'atau.