Paulmann 28325 LED Diamond Quadro GU5.3 12V 2700K Instruction Manual

1. Folasaga ma Fa'ato'a Oloaview

This manual provides essential information for the safe and efficient use of your Paulmann 28325 LED Diamond Quadro lamp. This product is a 3-watt LED lamp designed for 12-volt systems, featuring a GU5.3 base and emitting a warm white light at 2700 Kelvin. Its unique crystal reflector design provides directed illumination.

Image 1.1: The Paulmann 28325 LED Diamond Quadro GU5.3 lamp.

2. Faatonuga Saogalemu

Please read and understand all safety instructions before installing or operating the lamp. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• Saogalemu Faaeletise: Ia motusia le eletise i taimi uma a'o le'i fa'apipi'iina, aveese, pe fa'aleleia le masini.amp.
• Voltagu Fesoasoani: O lenei lamp operates on a 12-volt DC power supply. Do not connect it to a 230-volt AC mains supply without a suitable transformer.
• E le fa'apouliuligia: Lenei LED lamp is e le faanenefu. Do not use it with dimmer switches, as this can damage the lamp ma faaleaogaina le warranty.
• IP20 Fa'ailoga: O le lamp has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Use only in dry, indoor environments.
• Tempera: Ia mautinoa ia lava le ea savili faataamilo i le lamp to prevent overheating. Do not cover the lamp.
• Luga faʻavae: Aua ne'i taumafai e tala'ese, sui, pe toe lipea le lamp. E leai ni vaega e mafai ona fa'aaogaina i totonu.
• Lafoai: Lafoai le lamp according to local regulations for electronic waste.

3. Seti ma Fa'apipi'i

Follow these steps to properly install your Paulmann 28325 LED Diamond Quadro lamp:

1. Malosi motusia: Ensure the power supply to the lighting fixture is completely switched off at the main circuit breaker before beginning installation.
2. Identify Socket: Verify that your fixture has a compatible GU5.3 socket. The GU5.3 base features two pins spaced 5.3mm apart.
3. Faaofi Lamp: Carefully align the two pins of the LED lamp with the holes in the GU5.3 socket. Gently push the lamp i totonu o le fa'amau se'ia fa'amau lelei. Aua le faamalosia le lamp.
4. Paoa sapalai: Ensure the fixture is connected to a stable 12-volt DC power supply. If replacing a halogen lamp, ensure the existing transformer is compatible with LED loads.
5. Faʻafoʻi Mana: O le taimi lava na lamp is securely installed, restore power to the fixture at the main circuit breaker.

Image 3.1: Close-up of the GU5.3 LED lamp, showing the base pins.

Image 3.2: Diagram showing different lamp base types, including GU5.3 (12V section).

4. Fa'atonuga o Galuega

Operating the Paulmann 28325 LED Diamond Quadro lamp e tuusao:

• Ki/Tape: Use the standard wall switch or fixture switch to turn the lamp i luga pe tape.
• Malamalama fa'aulu: O le lamp provides a directed, warm white light (2700K) suitable for accent lighting or general illumination in appropriate fixtures.
• E le fa'apouliuligia: As stated previously, this lamp is not designed for dimming. Attempting to dim it may cause flickering, damage, or premature failure.

5. Tausiga

The Paulmann 28325 LED Diamond Quadro lamp requires minimal maintenance due to its long lifespan and durable design.

• Fa'amamaina: Ina ia faamama le lamp, ensure the power is off and the lamp is cool. Gently wipe the surface with a soft, dry, lint-free cloth. Do not use liquid cleaners, abrasive materials, or solvents, as these can damage the lamp's finish or internal components.
• Lamp Suiga: O le lamp has an average lifespan of 15,000 hours. When it reaches the end of its life, replace it with a new Paulmann 28325 LED Diamond Quadro lamp or a compatible GU5.3 12V LED lamp.
• Leai ni vaega e mafai ona fa'aaogaina e tagata fa'aoga: O le lamp contains no user-serviceable parts. Do not attempt to open or repair it.

6. Faʻafitauli

If you encounter issues with your Paulmann 28325 LED Diamond Quadro lamp, va'ai ile ta'iala e fo'ia ai fa'afitauli:

• Lamp E le Moli:
  • Ensure the power supply to the fixture is on.
  • Siaki o le lamp is correctly and securely seated in the GU5.3 socket.
  • Verify that the power supply is providing 12 volts DC. An incompatible or faulty transformer can prevent the lamp mai le galue.
  • Asiasi le lamp for any visible damage. If damaged, replace the lamp.
• Lamp Emo:
  • Faamaonia o le lamp is not connected to a dimmer switch. This lamp e le mafai ona faanenefu.
  • Check the 12V DC power supply for stability. Fluctuations in voltage can cause flickering.
  • Ensure the transformer is compatible with LED loads. Some older transformers designed for halogen lamps may not work correctly with LEDs.
• Light Output is Weak or Incorrect Color:
  • Faamaonia le lamp specifications match your requirements (e.g., 2700K warm white).
  • Ia mautinoa le lamp is receiving the correct 12V DC voltage. Under-voltage can reduce light output.

If these steps do not resolve the issue, please contact Paulmann customer support.

7. Fa'amatalaga

Detailed technical specifications for the Paulmann 28325 LED Diamond Quadro lamp:

Image 7.1: EU Energy Label for Paulmann 28325.

Image 7.2: Product data sheet with detailed specifications.

For more detailed product information, you can refer to the EPREL database: https://eprel.ec.europa.eu/qr/860106

8. Fa'amaonia ma Lagolago

Paulmann products are manufactured to high-quality standards. For warranty information and customer support, please refer to the official Paulmann webnofoaga pe fa'afeso'ota'i lau fa'atau.

Taofi lau lisiti fa'atau e fai ma fa'amaoniga o le fa'atauga mo so'o se tagi fa'amaonia.