Tusitaiala mo le Tagata Fa'aoga o le StarTech.com USB 3.0 AC1200 Dual Band Wireless-AC Network Adapter

Folasaga

This manual provides comprehensive instructions for the StarTech.com USB 3.0 AC1200 Dual Band Wireless-AC Network Adapter (Model: USB867WAC22). This adapter enables Wireless-AC connectivity for desktop or laptop computers via a USB 3.0 port, offering enhanced speed and range for demanding network applications.

The adapter supports dual-band operation (2.4GHz and 5GHz) with data rates up to 867 Mbps on the 5GHz band and up to 300 Mbps on the 2.4GHz band. It is backward compatible with 802.11a/b/g/n networks and features a 2T2R antenna design with a WPS button for easy setup.

O mea o lo'o i totonu

• StarTech.com USB 3.0 AC1200 Dual Band Wireless-AC Network Adapter (USB867WAC22)
• Ta'iala vave amata
• Avetaavale CD

Image: The StarTech.com USB 3.0 AC1200 Dual Band Wireless-AC Network Adapter shown with its retail packaging and included driver CD.

Seti Faatonuga

System Manaoga

• Available USB 3.0 port (backward compatible with USB 2.0, but 3.0 recommended for optimal performance)
• Operating System: Windows 10, Windows 8, Windows 7, Windows Server 2016, Windows Server 2019, macOS (El Capitan 10.11, Sierra 10.12, High Sierra 10.13, Mojave 10.14), Linux.

Fa'apipi'i Aveta'avale

1. La'u mai Aveta'avale: Visit the official StarTech.com website and navigate to the support page for model USB867WAC22. Download the latest drivers compatible with your operating system. While a driver CD may be included, downloading the latest version online is recommended for best performance and compatibility.
2. Fa'apipi'i Aveta'avale: Run the downloaded driver installation package. Follow the on-screen prompts to complete the installation. Administrator privileges may be required.
3. Toe amata le faiga: After the driver installation is complete, restart your computer if prompted.

Fa'afeso'ota'i le Adapter

1. Fa'aofi mea fa'apipi'i: Carefully insert the USB 3.0 AC1200 Wireless-AC Network Adapter into an available USB 3.0 port on your desktop or laptop computer. Ensure it is fully seated.
2. Fa'amaonia So'oga: Once inserted, the adapter's indicator light should illuminate, indicating it is powered on and active. Your operating system should recognize the new network adapter.

Image: The adapter actively connected to a laptop, with its green indicator light illuminated, signifying operation.

Fa'atonuga o Galuega

Feso'ota'i i se Feso'ota'iga uaealesi

1. Avanoa Seti Feso'otaiga:
   • Pupuni: Click the Wi-Fi icon in the system tray (bottom-right corner of the taskbar).
   • macOS: Click the Wi-Fi icon in the menu bar (top-right corner of the screen).
   • Linux: Access network settings through your distribution's system tray or settings menu.
2. Filifili Network: O le a aliali mai se lisi o feso'ota'iga uaealesi o lo'o avanoa. Filifili le feso'ota'iga e te mana'o ai (SSID).
3. Ulufale upu faataga: If the network is secured, enter the network security key (Wi-Fi password) and click "Connect".
4. WPS (Fa'atonu Puipuia le Wi-Fi): For routers supporting WPS, you can press the WPS button on the adapter and then on your router within two minutes to establish a secure connection without entering a password. Refer to your router's manual for WPS instructions.
5. Fa'amaonia So'oga: A uma ona fesoʻotaʻi, o le a faʻaalia mai e le faʻailoga o le Wi-Fi ua manuia le fesoʻotaʻiga, ma e tatau ona maua sau initaneti.

Fa'asilisiliina Fa'atinoga

• USB 3.0 Taulaga: Always use a USB 3.0 port for maximum data transfer speeds (up to 867 Mbps on 5GHz). USB 2.0 ports will limit performance.
• 5GHz Band: For faster speeds and less interference, connect to the 5GHz band of your router if available. The 2.4GHz band offers wider range but lower speeds.
• Tu'uga ole alaala: Position your wireless router in a central location, away from obstructions and interference sources (e.g., microwaves, cordless phones).
• Fa'afouga ta'avale: Regularly check the StarTech.com website for updated drivers to ensure optimal performance and compatibility.

Tausiga

• Fa'amamaina: Fa'aaogā se ie mālū ma mago e fa'amama ai le mea fa'apipi'i. Aua ne'i fa'aogaina ni vai fa'amamā po'o aerosol.
• Teuina: When not in use, store the adapter in a cool, dry place, ideally with its protective cap on the USB connector to prevent dust and damage.
• Faʻalauiloa Firmware: Periodically check the StarTech.com support website for any available firmware updates for your adapter.

Fa'afitauli

Fa'amatalaga

• Fa'ata'ita'iga: USB867WAC22
• Ituaiga uaealesi: 802.11a/b/g/n/ac
• Fa'aliliuga Fa'amatalaga: Up to 867 Mbps (5GHz), Up to 300 Mbps (2.4GHz)
• Talimalo talimalo: USB 3.0 (faiga i tua ma le USB 2.0)
• Fa'atonuga antenna: 2 Transmitter/2 Receiver (2x2:2)
• Faʻafia taimi: Dual band 2.4 GHz / 5 GHz
• Faiga Fa'atino Fegalegaleai: Windows 10, Windows 8, Windows 7, Windows Server 2016, Windows Server 2019, macOS (El Capitan 10.11, Sierra 10.12, High Sierra 10.13, Mojave 10.14), Linux
• Fua (LxWxH): Pe tusa o le 5.08 x 2.09 x 0.79 inisi (12.9 x 5.3 x 2.0 cm)
• Mea mamafa: E tusa ma le 0.64 aunese (18.14 kalama)
• Lanu: Lanu uliuli
• Atunuu na afua mai ai: Taiuani

Fa'amaonia ma Lagolago

The StarTech.com USB 3.0 AC1200 Dual Band Wireless-AC Network Adapter is backed by a StarTech.com warranty with free lifetime technical support.

For detailed warranty information or technical assistance, please visit the official StarTech.com support webnofoaga po'o fa'afeso'ota'i sa'o a latou 'au'aunaga fa'atau.

Punaoa i luga ole laiga:

• StarTech.com Official Webnofoaga
• StarTech.com Support Page

Ua Umaview (Visuals)

Ata o oloa

Image: The StarTech.com USB 3.0 AC1200 Dual Band Wireless-AC Network Adapter with its protective cap removed, revealing the blue USB 3.0 connector.

Ata: O luga i lalo view of the adapter, highlighting the StarTech.com logo and the indicator light area.

Ata: O se itu view of the adapter, clearly showing the WPS (Wi-Fi Protected Setup) button for easy network connection.

Image: The adapter actively connected to a laptop, with its green indicator light illuminated, signifying operation.