Jamo JSS6-VC2 6-Pair Speaker Selector User Manual

1. Folasaga

This manual provides instructions for the proper installation, operation, and maintenance of your Jamo JSS6-VC2 6-Pair Speaker Selector. Please read this manual thoroughly before using the product to ensure safe and optimal performance. Keep this manual for future reference.

2. Faatonuga Saogalemu

• Faitau faatonuga uma: Before operating the speaker selector, read and understand all safety and operating instructions.
• Taofi faatonuga: Taofi le saogalemu ma fa'atonuga fa'agaioiga mo fa'amatalaga i le lumana'i.
• Fa'alogo i lapataiga: Tausi i lapataiga uma i luga o le oloa ma i totonu o faʻatonuga faʻatonuga.
• Mulimuli i faatonuga: Mulimuli i fa'atonuga uma o fa'agaioiga ma fa'aoga.
• Fa'amamaina: Unplug this product from the amplifier before cleaning. Use a damp ie mo le faamamaina. Aua ne'i fa'aogaina ni vai fa'amama po'o ni mea e fa'amama aerosol.
• Suavai ma Susū: Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool).
• Savili: Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered.
• Avela: Do not place the product near heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) e maua ai le vevela.
• Au'aunaga: Aua e te taumafai e tautua oe lava i lenei oloa ona o le tatalaina pe aveese o ufiufi e ono fa'aalia ai oe i vol matautiatagu po o isi lamatiaga. Fa'asino atu auaunaga uma i tagata faigaluega agavaa.
• Avega tele: Aua ne'i ova le utaina o pa puipui, uaea fa'alautele, po'o mea fa'aoga talafeagai aua e ono tula'i mai ai se lamatiaga o le mu po'o le te'i eletise.
• Mea Ulufale ma le Faʻauluina o le Ava: Aua ne'i tuleia ni mea o soo se ituaiga i totonu o lenei oloa e ala i avanoa aua e ono pa'i i vol matautiatagu togi po'o vaega pupu'u e ono i'u ai i se afi po'o se fa'ate'i eletise. Aua ne'i masaa se vai o soo se ituaiga i luga o le oloa.
• Fa'asao maualalo: Ensure that the total impedance presented to your amplifier is not below 4 Ohms. Refer to the specifications section for details.

3. Mea i totonu o le afifi

Please check that all items are present and in good condition. If any item is missing or damaged, contact your dealer immediately.

• Jamo JSS6-VC2 6-Pair Speaker Selector Unit
• Tusi Lesona a le Tagata (lenei pepa)

4. Vaega o Oloa

• Manages up to six pairs of stereo speakers.
• Allows independent selection of speaker pairs.
• Individual volume control for each speaker pair.
• Designed to maintain a minimum 4 Ohm load to the ampola
• Fauga malosi mo le fa'atinoga fa'atuatuaina.

5. Seti ma Fa'apipi'i

Before beginning installation, ensure your amplifier and all audio components are powered off and unplugged from the mains.

5.1 Wiring Considerations

• Use high-quality speaker wire for optimal audio performance.
• Ensure correct polarity (+ to + and - to -) for all speaker connections. Incorrect polarity can lead to poor sound quality.
• The JSS6-VC2 is designed to protect your amplifier by maintaining a minimum 4 Ohm load. Do not bypass this protection.

5.2 Connecting to Your Ampola

1. Locate the speaker output terminals on your amplifier. These are typically labeled "Speaker Out" or "Main Speakers".
2. Connect the speaker output terminals of your amplifier to the "Amplifier Input" terminals on the JSS6-VC2. Ensure correct polarity.
3. ExampLe: Fa'afeso'ota'i le amplifier's left positive (+) terminal to the JSS6-VC2's "Amplifier Input L+" terminal. Connect the amplifier's left negative (-) terminal to the JSS6-VC2's "Amplifier Input L-" terminal. Repeat for the right channel.

5.3 Feso'ota'i Fofoga Fetalai

1. Identify the speaker terminals on the JSS6-VC2 labeled "Speaker 1", "Speaker 2", up to "Speaker 6".
2. Connect each pair of speakers to the corresponding terminals on the JSS6-VC2. For example, connect your first pair of speakers to the "Speaker 1" terminals.
3. Ensure correct polarity for each speaker pair.
4. Repeat this process for all speaker pairs you wish to connect, up to a maximum of six pairs.

6. Fa'atonuga o Galuega

Once all connections are securely made and verified, you can begin operating your Jamo JSS6-VC2 speaker selector.

6.1 Selecting Speaker Pairs

• Each speaker pair connected to the JSS6-VC2 has a corresponding selection button on the front panel.
• Press the button corresponding to the speaker pair you wish to activate. The button will typically illuminate or click into place to indicate selection.
• You can select one or multiple speaker pairs simultaneously.
• To deselect a speaker pair, press its button again.

6.2 Fetuuna'i le Volume

• Each selected speaker pair has an independent volume control knob.
• Rotate the knob clockwise to increase the volume for that specific speaker pair.
• Rotate the knob counter-clockwise to decrease the volume.
• The master volume control on your amplifier will affect all selected speaker pairs proportionally. Use the individual volume controls on the JSS6-VC2 for fine-tuning each pair.

7. Tausiga

• Fa'amamaina: Dust the unit regularly with a soft, dry cloth. For stubborn marks, use a slightly damp ie ona fa'amamago lelei. Aloese mai mea fa'amama fa'amama po'o so'o.
• Savili: Ensure that the ventilation openings on the unit are not blocked.
• Teuina: If storing the unit for an extended period, disconnect all cables and store it in a cool, dry place.

8. Faʻafitauli

If you encounter issues with your Jamo JSS6-VC2, please refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact Jamo customer support or your dealer for further assistance.

9. Fa'amatalaga

10. Fa'amatalaga Fa'amaonia

Jamo products are manufactured to the highest quality standards. This product is covered by a limited manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Jamo webnofoaga. Fa'amolemole taofi lau fa'amaoniga o le fa'atau mo tagi fa'amaonia.

11. Lagolago Tagata Fa'atau

If you require technical assistance or have questions regarding your Jamo JSS6-VC2 speaker selector, please contact your authorized Jamo dealer or visit the official Jamo webnofoaga mo punaoa lagolago ma faʻamatalaga faʻafesoʻotaʻi.

Webnofoaga: www.jamo.com (This is a placeholder link, please refer to actual Jamo support information)