Universal 24097 T5 Fluorescent Ballast User Manual

1. Folasaga

This manual provides instructions for the installation, operation, and maintenance of the Universal 24097 T5 Fluorescent Ballast, model B228PUNV115-D001C. This ballast is designed to operate two F28T5 fluorescent lamps with a programmed rapid start method, compatible with 120/277 volt electrical systems. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

2. Fa'amatalaga Saogalemu

LAPATA'IGA: Lamatiaga o le te'i eletise. Motusi le eletise a'o le'i fa'apipi'iina pe fa'aleleia.

E tatau ona faia le faʻapipiʻiina e se eletise agavaa e tusa ai ma tulafono faʻaeletise a le atunuʻu ma le lotoifale.
Ia mautinoa o le voltage matches the ballast's rated voltagu (120/277V).
Do not operate the ballast with damaged wiring or if the casing is compromised.
This device is not intended for use with dimmers unless specifically rated for dimming applications.
Taofi mai vai ma oamp siosiomaga.

3. Seti ma Fa'apipi'i

The Universal 24097 ballast is designed for easy integration into fluorescent lighting fixtures. Follow these steps for proper installation:

motusia le Malosi: Before beginning any work, ensure the main power supply to the fixture is turned off at the circuit breaker. Verify with a voltage su'e.
Remove Old Ballast (if applicable): Carefully disconnect and remove the existing ballast from the fixture. Note the wiring configuration.
Mount New Ballast: Securely mount the Universal 24097 ballast inside the fixture using appropriate screws or mounting hardware. Ensure it is firmly in place to prevent vibration.
Feso'ota'iga uaea:
Refer to the wiring diagram provided on the ballast label for correct connections. Typically, this involves:
- Feso'ota'i le lanu uliuli wire to the 120V or 277V (line) input.
- Feso'ota'i le lanu pa'epa'e wire to the neutral input.
- Feso'ota'i le lanu mumu ma lanu moaga wires to the lamp sockets as indicated for the two F28T5 lamps.
- Ensure all connections are secure and insulated with wire nuts.
Figure 1: Universal 24097 Fluorescent Ballast. This image shows the ballast unit, typically with a wiring diagram label visible on its surface, indicating connection points for power input and lamp galuega faatino.
Faatu Lamps: Insert the two F28T5 fluorescent lamps into their respective sockets.
Faʻafoʻi Mana: Once all connections are secure and lamps are installed, restore power at the circuit breaker.

4. Fa'atonuga o Galuega

The Universal 24097 ballast operates automatically once power is supplied. It utilizes a programmed rapid start method, which provides a brief preheat to the lamp cathodes before ignition, extending lamp life and ensuring flicker-free starting.

Upon power-up, the ballast will initiate the lamps.
Afai lamps do not light, ensure they are properly seated and power is supplied.
This ballast is designed for continuous operation within its specified temperature range.

5. Tausiga

The Universal 24097 ballast is designed for long-term, maintenance-free operation. However, periodic checks of the lighting fixture are recommended.

Fa'amamaina: Ensure the ballast and fixture remain free of dust and debris to prevent overheating. Disconnect power before cleaning.
Lamp Suiga: Pe a sui le lamps, always disconnect power first. Replace both lamps simultaneously for optimal performance and ballast life. Use only F28T5 lamps.
Su'ega uaea: Periodically inspect wiring for any signs of wear, fraying, or loose connections. Address any issues immediately after disconnecting power.

6. Faʻafitauli

If you encounter issues with your Universal 24097 ballast, refer to the following troubleshooting guide:

Fa'afitauli	Mafuaaga e ono tupu	Fofo
Lamps e le moli.	Leai se malosi e faʻapipiʻi ai. So'oga uaea matala. Fa'aletonu lamps. palasi faaletonu.	Siaki le va'a ma le ki puipui. Verify all wiring connections are secure (power off). Sui lamps with new F28T5 lamps. Afai lamps are new and wiring is correct, replace ballast.
Lamps flicker or hum.	Le sa'o lamp ituaiga. Tatala lamp feso'ota'iga. Matua lamps. Ballast nearing end of life.	Ensure F28T5 lamps e fa'aaogaina. Reseat lamps firmly in sockets. Sui lamps. Consider replacing ballast.
Ballast is hot to the touch.	Normal operating temperature. Le lelei le ea. Lisi ua ova le uta.	Some heat is normal. Ensure fixture has adequate airflow. Consult an electrician if overheating persists or is excessive.

7. Fa'amatalaga

Fa'ata'ita'iga: B228PUNV115-D001C (24097)
Fa'ailoga: Universal
Lamp Ituaiga: F28T5 Fluorescent
Numera o Lamps: 2
Sao Voltage: 120/277V AC
Metotia amata: Programmed Rapid Start
Numera o Vaega o Faumea: 24097
ASIN: B0070FFQG6
Aso Muamua Maua: Ianuari 22, 2012

8. Fa'amaonia ma Lagolago

For warranty information and technical support, please refer to the official Universal Lighting Technologies webnofoaga po'o fa'afeso'ota'i le latou matagaluega o auaunaga. Taofi lau lisiti fa'atau mo tagi fa'amaonia.

Tufuga: Tekonolosi Fa'amalama Lautele

Numera Vaega: 24097

ASIN: B0070FFQG6

Lautele 24097