Lithonia Lighting SB 232 120 GESB Wraparound Fluorescent Fixture

1. Folasaga

This manual provides instructions for the safe installation, operation, and maintenance of the Lithonia Lighting SB 232 120 GESB Wraparound 2-head Narrow Body T8 Fluorescent Ceiling Fixture. This fixture is designed for general illumination in various indoor settings such as storage rooms, offices, or retail applications. Key features include a hinged design for easy cleaning, an instant-on electronic ballast to eliminate flickering and humming, and a prismatic diffuser for controlled light distribution.

Image 1.1: Lithonia Lighting SB 232 120 GESB Wraparound Fluorescent Fixture.

2. Fa'amatalaga Saogalemu

LAPATAIGA: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing. Improper wiring can result in electric shock or fire.

• Always turn off the main power supply before attempting any installation, maintenance, or bulb replacement.
• Consult a qualified electrician if you are not familiar with electrical wiring.
• Ia fa'amautinoa o lo'o fa'amautu uma feso'ota'iga uaea ma usita'ia tulafono fa'aeletise a le atunu'u.
• Fa'aaoga mea e puipui ai le tagata lava ia, e pei o matatioata saogalemu ma totigilima, a'o fa'apipi'i.
• Handle the fixture carefully to avoid sharp edges.
• O lenei mea fa'apipi'i ua mamanuina mo na'o totonu.

3. Mea i totonu o le afifi

Fa'amautinoa o lo'o iai vaega uma a'o le'i amata fa'apipi'i:

• 1 x Lithonia Lighting SB 232 120 GESB Wraparound Fluorescent Fixture

Fa'aaliga: Fluorescent T8 bulbs, mounting hardware (screws/anchors), and wire nuts are NOT included and must be purchased separately.

4. Fa'amatalaga

Image 4.1: Product dimensions of the SB 232 120 GESB fixture.

5. Fa'apipi'i

Mulimuli i laasaga nei mo le fa'apipi'iina lelei. Ia mautinoa ua motusia le eletise a'o le'i fa'aauau.

5.1. Sauniuniga

• Tape le paoa i le ta'avale ta'avale po'o le pusa fuse.
• Gather necessary tools: screwdrivers, wire strippers, drill, appropriate mounting hardware (screws/anchors), and wire nuts (all not included).
• Unpack the fixture and inspect for any damage.

5.2. Fa'amauina o le Fa'amau

• Determine the desired mounting location on the ceiling for surface mounting or identify points for stem mounting.
• For surface mounting, align the fixture and mark the drilling points for securing it to the ceiling joists or using appropriate anchors.
• For stem mounting, the fixture requires a minimum of two single stem hangers (not included).
• Secure the fixture firmly to the mounting surface using the appropriate hardware. Note that the wire entry tabs are located on the top of the fixture, requiring access from above for wiring.

Image 5.1: Mounting options and features of the fixture.

5.3. Faʻapipiʻi

• Route the electrical supply wires into the fixture's wiring compartment.
• Connect the supply wires to the fixture's pre-wired connections using wire nuts (not included). Ensure proper polarity (live to live, neutral to neutral, ground to ground).
• The fixture may feature push-lok connectors for simplified wiring. Ensure wires are fully inserted and secure.
• Carefully tuck all wires into the wiring compartment and secure any covers.

5.4. Fa'apipi'iina o matauila

• Install two T8 fluorescent bulbs (not included) into the lamp holders by aligning the pins with the sockets and twisting gently until secure.

5.5. Diffuser Installation

• Attach the prismatic acrylic diffuser to the fixture. The hinged design allows it to snap into place or be secured with latches.

6. Galuega

Once installation is complete and verified, restore power to the circuit. The fixture will illuminate immediately upon activation of the wall switch, thanks to its instant-on electronic ballast, which prevents flickering and humming.

7. Tausiga

O le tausiga masani e mautinoa ai le lelei o le faʻatinoga ma le umi o le ola o lau faʻaputuga.

7.1. Fa'amamaina

• Ta'ese i taimi uma le paoa a'o le'i fa'amama.
• The hinged design of the diffuser allows for easy access. Open the diffuser carefully.
• Clean the diffuser and the exterior surfaces of the fixture with a soft, damp ie.
• Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or acrylic diffuser.
• Ia mautinoa ua mago vaega uma a'o le'i toe fa'afo'i le eletise.

7.2. Suiga Puta

• Always disconnect power before replacing bulbs.
• Open the hinged diffuser to access the bulbs.
• Carefully remove the old T8 fluorescent bulbs by twisting them to disengage from the sockets.
• Insert new T8 fluorescent bulbs, ensuring the pins are properly aligned with the sockets, and twist gently until secure.
• Close the diffuser securely.
• Toe faʻafoʻi le mana i le mea faʻapipiʻi.

8. Faʻafitauli

If you encounter issues with your fixture, refer to the following troubleshooting guide:

9. Fa'amaonia ma Lagolago

This Lithonia Lighting SB 232 120 GESB Wraparound Fluorescent Fixture is backed by a 1-tausaga fa'atapula'a fa'apolopolo a le fale gaosi oloa mai le aso na fa'atau ai.

This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications.

For technical support, warranty claims, or further assistance, please contact Lithonia Lighting customer service. Refer to the official Lithonia Lighting webnofoaga mo faʻamatalaga faʻafesoʻotaʻi o loʻo iai nei.